Morphology development of 10‐μm scale polymer particles prepared by SPG emulsification and suspension polymerization

Classicalparticle morphologies, core‐shell, hemisphere, sandwich, and so on, were all reproducible by starting from ca. 10‐μm uniform droplets composed of monomers, initiator, solvents, and polymer, and polymerizing them by subsequent suspension polymerization. SPG (Shirasu porous glass) membrane was employed to form uniform size droplets having the coefficient of variation (CV) around 10%. Styrene (ST) and acrylic monomers were used as monomers, and their polymers were dissolved in the droplets to investigate the development of phase separation. When hydrophilic methyl methacrylate (MMA) was polymerized in the droplets with a mixed solvent consisting of hydrophilic hexanol (HA) and hydrophobic benzene and hexadecane (HD), the resulting morphology shifted from hemisphere to sandwich and eventually to PMMA/solvent core‐shell with increasing hydrophilicity of the mixed solvent. The sandwich was converted to the core‐shell after several weeks elapsed. As styrene was added to MMA, the morphology shifted from hemisphere core/solvent shell to raspberry core/solvent shell as the fraction of ST increased. The domain of the mixed solvent in the raspberry core was reduced with increasing the hydrophilicity of the mixed solvent. All these morphologies were eventually converted to the copolymer core/solvent shell. When a mixed monomer of styrene and MMA dissolving polystyrene (PS) was polymerized, the resulting morphology shifted from salami to core‐shell with increasing the MMA fraction in the comonomer. The salami particles were then swollen with toluene, and after the swelling, toluene was removed under the different temperature and pressure. The final particle morphology converted to the core‐shell with a milder rate of toluene removal which was predicted from the thermodynamic model. When styrene and cyclohexyl acrylate (CHA), a pair with widely different reactivity ratios, were copolymerized, salami morphologies, with tiny CHA‐rich domains dispersed in the matrix, were obtained even at a higher fraction of CHA in comonomer. Effects of glass transition temperature of the polymers, molecular weight, and the composition of copolymers were taken in consideration whenever the final morphologies were discussed. By these experiments, the authors tried to demonstrate an advantage of using large uniform spheres for the particle morphology studies. SPG emulsification technique was a potential tool because of its free formulation of the droplets, and the subsequent polymerization could undergo without the breakup or coalescence of the droplets. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2200–2220, 2001     

空气氧化法制备肉桂酸

以银吸附在活性碳上作催化剂 ,用空气作氧化剂 ,将肉桂醛转化为肉桂酸 ,收率为 95 8%。     

用Fe~0-H_2O_2氧化法处理高浓度有机废液研究

提出了用于工业废水处理的Fe0 -H2 O2 氧化法 ,并用高浓度苯酚 (5 0 0 0mg/L)和甲酚 (40 0 0mg/L)进行实验 ,结果表明Fe0 -H2 O2 氧化法在 330min后 ,DOC转化率达 80 % ,中和后污泥产生量少 ,而传统Fenton氧化法 ,同等实验条件下 ,DOC转化率仅为 6 0 % ,而且后者再提高转化率 ,中和时伴随大量污泥产生 ,因此认为Fe0 -H2 O2 氧化法优于Fenton氧化法     

一次烧成施釉彩陶制品

采用当地粘土合成了一次烧成施釉彩陶制品用坯料 ,研究了坯体和釉层的形成特点 ,并确定了制品的温度时间参数     

Chitosan/silk fibroin composite scaffolds for wound dressing

Three‐dimensional (3D) chitosan/silk fibroin (CS/SF) porous composite scaffolds have been prepared by simply coating a thin layer of CS onto spunlaced SF scaffolds via hydrogen‐bonding assembly technique, and they were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X‐ray diffraction (XRD), and mechanical property measurements. The results show that porous scaffolds have a pore diameter around 50–200 μm, and improved mechanical property compared with SF, resulting from strong intermolecular hydrogen bonding interactions between CS and SF, together with the maintained β‐sheet structure of SF. The medical and biological properties of the composite scaffolds were further evaluated. The results demonstrate that they possess good biocompatibility and a broad spectrum of antimicrobial properties. The in vivo animal experiments show that the composite scaffolds promote skin regeneration of rats without any teratogenic effect and inflection, thus they are very promising in the application of wound dressings. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42503.     

Macromolecular motions and hydrodynamic radius variation in dilute solutions under shear action

Understanding the dynamics of single polymer chains and rheological mechanism in dilute polymer solutions under shear stress is essential for fields such as the petroleum and food industries, biomedical materials and drug delivery. Here we present an experimental method for measuring the viscosity of polymer solutions and studying the variation of single polymer chain conformation and the mechanism of molecular motions according to the relationship between the intrinsic viscosity, [η], and the shear rate. Of striking interest is that we find that [η] changing with the shear rate presents three stages which may explain the nature of the viscoelastic performance of polymer solutions and the isolated molecular motions. The significance of these results is the finding of the polymer chain deformation to match the pore throat which has enormous potential implications in drug delivery, genetics and biomedicine © 2014 Society of Chemical Industry.     

Enhancement of Thermoelectric Performance in Hierarchical Mesoscopic Oxide Composites of Ca3Co4O9 and La0.8Sr0.2CoO3

The natural contradiction in enhancing electrical conductivity and thermopower in thermoelectric oxides makes it hard to improve the performance of a single thermoelectric oxide material. We report a facile method to construct a unique architecture of thermoelectric oxides that is promising to realize a simultaneous improvement of overall electrical conductivity and thermopower. Here, a series of two‐phase nanocomposites comprising of Ca₃Co₄O₉ (CCO) and La_0.8Sr_0.2CoO₃ (LSCO) has been synthesized through ball milling followed by spark plasma sintering (SPS) method. The electron microscope images reveal that the two constituents form the unique composites while retaining their individual crystalline and morphological identities. Owing to the hierarchical mesoscopic structure with nanoscale particles and submicrometer scale grain boundaries, an external strain is induced into the CCO grains by the LSCO nanoparticles to enhance the thermopower. The mesoscopic structure is also favorable for improving the electrical conductivity. Moreover, the long‐wavelength phonons can be scattered effectively from LSCO nanoparticles and the thermal conductivity is further suppressed. With compromises between power factor and thermal conductivity, the largest ZT achieved is up to 0.41 at 1000 K for the composites with 25 wt% of LSCO.     

Effects of Gd Substitution on Sintering and Optical Properties of Highly Transparent (Y0.95−xGdxEu0.05)2O3 Ceramics

Highly transparent (Y_0.95?xGd_xEu_0.05)₂O₃ (x = 0.15–0.55) ceramics have been fabricated by vacuum sintering at the relatively low temperature of 1700°C for 4 h with the in‐line transmittances of 73.6%–79.5% at the Eu³⁺ emission wavelength of 613 nm (~91.9%–99.3% of the theoretical transmittance of Y_1.34Gd_0.6Eu_0.06O₃ single crystal), whereas the x = 0.65 ceramic undergoes a phase transformation at 1650°C and has a transparency of 53.4% at the lower sintering temperature of 1625°C. The effects of Gd³⁺ substitution for Y³⁺ on the particle characteristics, sintering kinetics, and optical performances of the materials were systematically studied. The results show that (1) calcining the layered rare‐earth hydroxide precursors of the ternary Y–Gd–Eu system yielded rounded oxide particles with greatly reduced hard agglomeration and the particle/crystallite size slightly decreases along with increasing Gd³⁺ incorporation; (2) in the temperature range 1100°C–1480°C, the sintering kinetics of (Y_0.95?xGd_xEu_0.05)₂O₃ is mainly controlled by grain‐boundary diffusion with similar activation energies of ~230 kJ/mol; (3) Gd³⁺ addition promotes grain growth and densification in the temperature range 1100°C–1400°C; (4) the bandgap energies of the (Y_0.95?xGd_xEu_0.05)₂O₃ ceramics generally decrease with increasing x; however, they are much lower than those of the oxide powders; (5) both the oxide powders and the transparent ceramics exhibit the typical red emission of Eu³⁺ at ~613 nm (the ⁵D₀→⁷F₂ transition) under charge transfer (CT) excitation. Gd³⁺ incorporation enhances the photoluminescence and shortens the fluorescence lifetime of Eu³⁺.     

Experimental study of oscillation behaviors in confined impinging jets reactor under excitation

Dynamic behaviors in a three‐dimensional confined impinging jets reactor (CIJR) under excitation were experimentally studied by a flow visualization technique at 75 ≤ Re ≤ 150. The effects of inlet Reynolds numbers (Re), excitation frequencies and excitation amplitudes on the oscillation behaviors in CIJR have been investigated by a particle image velocimetry (PIV) and a high‐speed camera. Results indicate that the excitation in the inflow of the opposed jets can induce periodic oscillation of the impingement plane along the axis, whose oscillation frequency is equal to the excitation frequency. At Re ≤ 100, the induced axial oscillation can further cause a deflective oscillation with a frequency nearly equal to the excitation, and the scale of the vortex in the impingement plane is well regulated by the excitation frequency. At Re = 150, the excitation of amplitude less than 20% has insignificant effect on the deflective oscillation existing in CIJR. A semiempirical formula has been proposed to predict the oscillation amplitude of the impingement plane in CIJR under excitation. © 2014 American Institute of Chemical Engineers AIChE J, 61: 333–341, 2015     

草酸盐热分解法制备多孔FeNi合金粉及其热分解动力学

采用草酸盐热分解还原法制备了粒径1 mm的多孔结构FeNi合金粉,研究了草酸铁镍前驱体热分解过程. 结果表明,FeNi合金为纯BCC相,前驱体在加热过程中在217.5和352.5℃脱水和热分解释放出CO和CO2气体,产生多孔结构;前驱体热分解活化能为148.59 kJ/mol,热分解过程遵循随机成核和随后生长模型,指前因子为1.25×107,动力学方程为G(a)=[-ln(1-a)]0.44.