混杂增强相(Al3Ti-TiB2-SiC)的形成热力学分析

对利用原位反应与高剪切液态搅拌复合专利技术制备的Al3Ti-TiB2-SiC/Al-13%Si复合材料的增强相的形成热力学进行了理论计算和分析,并采用差热分析法(DTA)进行了试验验证.研究表明:(1)Al-Ti-B体系加入到Al-13%Si熔体中可发生原位反应,形成增强相,原位反应的开始温度为905.3℃,结束温度为1 061.23℃;(2)Al-Ti-B体系加入到Al-13%Si熔体中,制备颗粒增强Al-13%Si复合材料的增强相为TiB2和Al3Ti,但TiB2形成能力最强.     

Microstructure of ternary Zn1-xCdxO films on silicon substrate

Ternary Zn1-x CdxO alloying films were deposited on silicon substrates by a reactive magnetron sputtering method. The structures of the films were characterized by transmission electron microscopy(TEM) and X-ray diffraction(XRD) analysis, respectively. The XRD measurement shows that the wurtzite-type structure of Zn1-xCdxO can be stabilized up to Cd content of x=0.53 without a cubic CdO phase separation. The TEM measurement shows that the films have a columnar structure and the grains are highly c-axis oriented perpendicularly on silicon substrate although some grain boundaries are slightly tilted. High resolution TEM observation indicates that a native layer of amorphous SiO2 exists at the ZnCdO/Si interface and that ZnCdO grains with c-axis preferred orientation nucleate directly on substrate surface.     

在VC环境下利用Pro/TOOLKIT对Pro/E进行二次开发

目前我国Pro/E应用日益普及,而二次开发严重滞后,论文介绍了其二次开发工具Pro/TOOLKIT,并针对Pro/TOOLKIT开发对话框较困难,提出利用动态链接库实现了在Pro/E中调用MFC对话框,给出了实现方案和齿轮参数化设计的编程实例.     

浇注法制备表面复合材料用复合剂的强度表征及测试

用改进后的强度测试仪，检测分析了三种自制复合剂不同温度下的抗弯强度，探讨了复合剂强度的测试方法，结果表明：抗弯强度可用来表征用于浇注法制备金属基复合材料的复合剂强度，抗弯强度越高，铸件浇铸成型率越高。     

直齿轮精密塑性成形时齿面裂纹的产生机理及控制方法

本文通过对内齿轮缩挤成形工艺的有限元模拟 ,分析了直齿轮成形时齿面裂纹的产生机理 ,并从理论上进行了解释 ,进而提出了防止齿面裂纹产生的方法     

实行清洁生产是企业可持续发展的有效途径

本文通过对贵州铝厂依托科技进步和工艺技术升级 ,推动环境治理技术的进步 ,坚持走可持续发展之路 ,成长为我国铝工业先进生产水平的优秀企业 ,证明了清洁生产是企业实现可持续发展的有效途径。     

铝合金水龙头零件的压铸模具设计

分析了铝合金水龙头零件的结构工艺性特点,介绍了压铸模的浇注系统及模具结构设计。经实际生产检验,该模具在使用过程中操作方便、安全,工作稳定可靠,铸件质量达到要求。     

Creep behavior and microstructure evolution of directionally solidified superalloy IC 10 at high temperature

The creep behavior of directionally solidified （DS） superalloy IC 10 was investigated under 192 MPa and 218 MPa at 980 ℃. Under the testing conditions, the marked creep characteristic of the superalloy is that the creep curve has a short primary and secondary stage and a long tertiary stage. Another creep characteristic is that the superalloy has excellent plasticity at high temperature. To study the creep behavior, the microstructure was observed by SEM and TEM. Different from other microstructure of Ni-base superalloys, superalloy IC10 forms incompletely rafted γ＇ phase during the creep processes. To understand the creep deformation mechanism of superalloy IC10, the movement of dislocations was analyzed. The results show that the dislocations moving in the γ matrix and climbing over the γ＇ precipitates is the main deformation mechanism under the experimental conditions.     

反向工程中测量点云配准的新方法

在光学非接触三维测量中，复杂对象的重构需要多组测量数据的配准。为了获得好的配准结果，提出一种新的配准方法——直接误差分析配准方法。该方法基于一种新型的双目CCD光栅投影测量系统进行测量和分析。实验结果表明该测量方法的配准误差大约0．2mm左右．从而证实该方法的可行性。     

冷摆辗模具的失效分析与Cr12型钢热处理工艺

对冷摆辗模具进行失效分析，介绍常用的冷摆辗模具材料Cr12型钢的热处理工艺。