四合一天线合路器的控制与实现

介绍了一种基于FPGA控制的四合一天线合路器,该合路器能够根据4部电台的不同频率选择正确的通信信道,并将其信息传送到一路天线上进行通信。文中介绍了该合路器的硬件结构,软件控制算法以及工程上的实现方法。测试表明,该天线合路器能够满足4部电台同时在一路天线上进行接收与发送的要求,具有广泛的实用价值。     

Snowstorm caused chaos but risk free to power grid

<正>From January 1 to 3,2010, the heaviest snow for decades in North China caused widespread chaos in traffic and people's livelihood, but there was no risk to power grid.     

Hainan Changjiang nuclear power project construction started

<正>On April 25, the Hainan Changjiang nuclear power project, jointly invested by China National Nuclear Corporation (CNNC) and China Huaneng Group with 51% and 49% shares, respectively, formally began     

World’s new highest arch dam emerged

<正>On March 8, 2010, the concrete pouring was completed on the dam crest in the state’s key project, Yunnan Xiaowan Hydropower Station. Consequently,     

源霸二线相间间隔棒掉串分析及对策

本文对大同超高压供电公司运行维护的源霸二线发生断裂相间间隔棒的运行、结构、强度、安装等情况进行了分析,并在此基础上提出了防止相间间隔棒断裂反事故措施。     

论装饰装修施工的现场管理与协调

本文以装修施工现场管理与协调现状为基本出发点,结合现阶段装饰装修施工场地的管理现状,分析了施工进度的保障方式以及整体建筑结构安全的确保对策,旨在使建筑装修企业在确保装修工程质量的同时,满足不同的用户的建设要求,进而达到良好的装修效果,在为装修装饰工程提供现场管理与协调建议的同时,为施工现场管理提供技术支持。     

双断点断路器开断过程燃弧能量的不平衡问题

通过对开断电弧运动过程观察,发现在双断点塑壳断路器开断过程中,两个断口之间存在电弧能量的不平衡,不利于断路器综合性能的提高。进一步的分析实验认为,电弧背后击穿是引起电弧能量不平衡的主要原因,通过适当的设计抑制背后击穿,可以使断口间能量有效趋于平衡。     

基于面向时间过程的静态安全分析

针对传统静态安全分析基于单一时间断面、无法细致反映系统状态变化的不足,本文提出了一种面向时间过程的静态安全分析方法。首先介绍了面向过程方法的基本概念。充分利用丰富的电力系统测量和负荷预测数据信息,提取了描述每个时间断面的特征向量;结合电力系统负荷连续变化的特点,通过改进的K-means聚类分析技术,对负荷曲线进行了时间过程的划分。定义了提取时间子过程最大特征断面和最小特征断面的指标,并对特征断面的显著代表性进行了研究。在保证电网安全稳定的前提下,本文方法可一定程度上提高传输线路的利用率。最后,IEEE30节点算例表明面向时间过程静态安全分析方法的合理性和有效性。     

Brazil’s Petrobras Keen on Cooperation with China

Brazil’s state-controlled oil and gas giant Petrobras is analyzing future cooperation opportunities with Chinese companies,the company’s CEO Jose Sergio Gabrielli said in an interview with Xinhua in Rio de Janeiro in late     

Unintentionally produced dioxin-like polychlorinated biphenyls during cooking

The formation and distribution of dioxin-like polychlorinated biphenyls (dl-PCBs) during cooking was investigated. Concentrations of dl-PCBs in liquid residues, cooked beef, and oil fumes generated during heating were determined by isotope dilution HRGC/HRMS. Although the levels of dl-PCBs in well-done beef were lower compared with those of raw beef, relatively high concentrations of dl-PCBs were detected in the oil fumes produced during heating. This suggests that dl-PCBs in raw beef may have volatilized into the oil fumes during the cooking process. Sucralose and chloropropanols contained in raw materials may have resulted in increased dl-PCB concentrations and the level of toxic equivalents (TEQ) in the oil fumes produced under high temperature during cooking. Concentrations of dl-PCBs did not vary greatly in cooked beef, except when higher levels of chloropropanols were presented in the uncooked raw materials. Results indicate that sucralose and chloropropanols may promote the formation of dl-PCBs during the cooking process. The newly produced dl-PCBs from raw beef cooking were mainly present in oil fumes, which gave rise to high levels of TEQ in oil fumes.