Effect of pre‐germination time of brown rice on serum cholesterol levels of hypercholesterolaemic rats

BACKGROUND: Brown rice is unpolished rice with immeasurable benefits for human health. Brown rice (BR) and pre‐germinated brown rice (PGBR) are known to contain various functional compounds such as γ‐oryzanol, dietary fibre and γ‐aminobutyric acid (GABA). In the present study, the experimental diets containing BR and PGBR (24, 48 h pre‐germination) were used to investigate the influence of pre‐germination time of brown rice on blood cholesterol in Sprague–Dawley male rats. RESULTS: Hypercholesterolaemia and elevation of LDL‐cholesterol were successfully ameliorated by the experimental diets containing BR and PGBR (24 and 48 h pre‐germination). As compared to the control sample, the pre‐germination time had a significant (P < 0.05) effect on blood cholesterol of Sprague–Dawley male rats. It was also found that the significantly (P < 0.05) better effect on lipid profile of hypercholesterolaemic rats was observed by prolonging the pre‐germination time. As compared to non‐germinated brown rice, the germinated brown rice showed the higher cardio‐protective effect on hypercholesterolaemic Sprague–Dawley male rats. CONCLUSION: The present study suggests that the changes of blood cholesterol can be mainly modulated by using the PGBR rather than BR. The prolonging of pre‐germination time led to an increase in the bioactive components, thereby providing a more efficient functional diet affecting the high blood cholesterol. This study suggests that PGBR can be used instead of BR and polished rice in the human diet. Copyright © 2009 Society of Chemical Industry     

Oxidative stability of palm‐ and soybean‐based medium‐ and long‐chain triacylglycerol (MLCT) oil blends

BACKGROUND: Medium‐ and long‐chain triacylglyerols (MLCT) enzymatically esterified using Lipozyme RM IM lipase has very low oxidative stability as it does not contain any antioxidants. The aim of this work was to study the ability of various antioxidants to increase the oxidative stability of palm‐ and soybean‐based MLCT blends which assist to bring up the oxidative stability of both MLCT blends. In this study, the effectiveness of rosemary extracts, sage extracts, tert‐butylhydroquinone (TBHQ) and mixtures of tert‐butyl‐4‐hydroxyanisole (BHA) and tert‐butyl‐p‐hydroxytoluene (BHT) in protecting against oxidation of various MLCT blends was investigated. RESULTS: Blending of MLCT oil with either palm olein or soybean oil improved its smoke point values and oxidative stability. TBHQ addition to both palm‐ and soybean‐based MLCT blends increased oxidative stability. Combination of BHA and BHT showed no significant improvement (P > 0.05) in ability to protect blends from oxidation compared to natural antioxidants such as sage or rosemary extracts. CONCLUSION: Blended oils with 500 g kg^?1 MLCT and 500 g kg^?1 palm olein (MP5) were the most suitable for use at high temperature based on the fatty acid composition of the MLCT blends, which subsequently had an effect on thermal oxidative stability. In general, addition of either natural or synthetic antioxidant assisted in improving the antioxidative strength of both MLCT blends. MLCT blends with added TBHQ showed the highest thermal oxidative stability among the antioxidants used. Copyright © 2008 Society of Chemical Industry     

HEAT TRANSFER IN THREE-PHASE FLUIDIZED BEDS WITH NON-NEWTONIAN PSEUDOPLASTIC SOLUTIONS

Heat transfer experiments have been conducted in three-phase fluidized beds (TPFB) of 3 and 5 mm glass spheres. To assess the effect of non-Newtonian flow behavior, concentrated pseudoplastic xanthan solutions were employed. The gas and liquid superficial velocities range from 0.81 to 14.4 cm/s and 1.27 to 9.0 cm/s respectively. The impact of these parameters as well as the effect of the effective liquid viscosity, and the solid size on heat transfer in TPFB are discussed. All heat transfer coefficients can be discribed satisfactorily by a new correlation which predicts the Nu-values in TPFB with pseudoplastic solutions with ±9.13% average standard deviation.     

Sepiolite hybridized commercial fillers,and their effects on curing process,mechanical properties,thermal stability,and flammability of ethylene propylene diene monomer rubber composites

Ethylene propylene diene monomer rubber (EPDM)-based composites containing sepiolite (sep) hybridized with calcium carbonate (CaCO₃), silica (Sil) or carbon black (CB) were prepared on a two-roll mill. The influence of fillers’ contents on the curing, mechanical, thermal and flammability of the composites was investigated. In comparison with EPDM/sep at 30 parts per hundred rubbers (phr) as a control composite, EPDM/sep/CB composites exhibited an outstanding improvement in tensile strength followed by EPDM/sep/Sil and EPDM/sep/CaCO₃ composites. EPDM/sep/CB displayed the highest thermal stability and also improved flammability resistance. In addition, a higher amount of carbon black gave higher tensile strength. The results were influenced by the ability of CB to disperse well and form protective layers acting as mass transport barriers in the matrix. The field emission scanning electron microscopy analyses proved better dispersion of CB in the matrix. The presence of protective layers on the surface of samples consequently improved the thermal properties of the EPDM composites. The mechanism of formation of char protective layer in hybrid EPDM composites was also investigated based on morphological observations of char residues. According to this work, Sil and CB were able to hybrid with sep, while sep could be a potential substitution of CaCO₃ in the EPDM composites.     

Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Comparison of the mechanical properties and interfacial interactions between talc,kaolin, and calcium carbonate filled polypropylene composites

Three types of mineral fillers—talc, calcium carbonate (CaCO₃), and kaolin (10–40 wt % filler loadings)—were compounded with polypropylene (PP) with a twin‐screw extruder. The composites were injection‐molded, and the effects of the filler loading on the mechanical, flow, and thermal properties for the three different types of filled composites were investigated. The aim was to compare their properties and to deduce prospective filler combinations that would yield hybrid PP composites in following studies. The results showed that in most cases, the strength and stiffness of the talc‐filled PP composites was significantly higher than those of the CaCO₃‐ and kaolin‐filled PP composites. However, CaCO₃, being a nonreactive filler, increased the toughness of PP. The kaolin‐filled PP composites also showed some improvement in terms of strength and stiffness, although the increases in these properties were not as significant as those of the talc‐filled PP composites. The effects of interfacial interactions between the fillers and PP on the mechanical properties were also evaluated with semiempirical equations. The nucleating ability of all three fillers was studied with differential scanning calorimetry, and the strongest nucleating agent of the three was talc, followed by CaCO₃ and kaolin. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3315–3326, 2004     

Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

Development of coating materials from liquid wax esters for wood top-based coating

Of late, UV-curable products are gaining attention in the wood industry because of the effectiveness and efficiency of this method. UV-curable surface coatings are widely used because of their excellent properties and because they are environmentally friendly products. In this study, immobilized Candida antarctica lipase B was used to catalyze formation of liquid wax esters, such as adipate esters, via a solvent-free process. The adipate esters formed were then used as UV-curable reactants in the wood coating formulations, consisting of epoxy acrylate, additives, and a photoinitiator. The performance of the products was evaluated by coating them onto glass tiles (using gel content, hardness, and scratch resistance tests) and wood panels (using adhesion, impact, and heat resistance tests). The coated film from this formulation performed well during the evaluation tests. The gel content exhibited more than 90% polymerization, while the pendulum hardness gave a value of 55.25%. Both analyses were significant in determining the effect of irradiation cycles. A scratch test was also carried out to verify the resistance of the coating. The maximum weight load which can be resisted by the wax esters formulation is 4.5 N.     

Use of a Reflectance Spectroscopy Accessory for Optical Characterization of ZnO-Bi(2)O(3)-TiO(2) Ceramics

The optical band-gap energy (E(g)) is an important feature of semiconductors which determines their applications in optoelectronics. Therefore, it is necessary to investigate the electronic states of ceramic ZnO and the effect of doped impurities under different processing conditions. E(g) of the ceramic ZnO + xBi(2)O(3) + xTiO(2), where x = 0.5 mol%, was determined using a UV-Vis spectrophotometer attached to a Reflectance Spectroscopy Accessory for powdered samples. The samples was prepared using the solid-state route and sintered at temperatures from 1140 to 1260 °C for 45 and 90 minutes. E(g) was observed to decrease with an increase of sintering temperature. XRD analysis indicated hexagonal ZnO and few small peaks of intergranular layers of secondary phases. The relative density of the sintered ceramics decreased and the average grain size increased with the increase of sintering temperature.     

Selective formation of tungsten nanowires

We report on a process for fabricating self-aligned tungsten (W) nanowires with polycrystalline silicon core. Tungsten nanowires as thin as 10 nm were formed by utilizing polysilicon sidewall transfer technology followed by selective deposition of tungsten by chemical vapor deposition (CVD) using WF6 as the precursor. With selective CVD, the process is self-limiting whereby the tungsten formation is confined to the polysilicon regions; hence, the nanowires are formed without the need for lithography or for additional processing. The fabricated tungsten nanowires were observed to be perfectly aligned, showing 100% selectivity to polysilicon and can be made to be electrically isolated from one another. The electrical conductivity of the nanowires was characterized to determine the effect of its physical dimensions. The conductivity for the tungsten nanowires were found to be 40% higher when compared to doped polysilicon nanowires of similar dimensions.