Magnetic contactless detection of stress distribution and assembly defects in constructional steel element

The paper describes contactless stress measurement in a fit joint. The stress was investigated on the basis of changes in material's magnetisation. The level of magnetic leakage field changes due to mechanical stress is low. The stress measurements are determined by material's magnetoelastic sensitivity. This sensitivity must be ascertained. The magnetising field intensity is selected with high accuracy in the range where material's magnetoelastic sensitivity is greatest.The fit joint was executed with tolerance kept within planned limits. The elastic deformation of the ring's material at the lateral surface was measured with a strain gauge. At the last stage, the analytic and numerical calculations of the fit joint were compared to the magnetic field measurement results. The experiment has proven that it is possible to carry out contactless magnetic tests in constructional steel characterised by low magnetoelastic sensitivity.     

Thickness effects of water overlayer on its explosive evaporation at heated metal surfaces

Molecular dynamics (MD) simulations have been employed to investigate the effect of the thickness of a water overlayer on the character of its ejection from a heated Au surface. The simulations are performed for five systems differing in the thickness of the water overlayer which was adsorbed on a metal substrate heated to 1000 K. For each system, an explosive evaporation occurs in the part of the water film adjacent to the metal surface and the upper part of the film is pushed off by the generated force. The average maximum temperature of the water film decreases as the film thickness increases. In contrast, the temperature achieved by the fast cooling due to the explosive evaporation shows an inverse trend. The significance of these model calculations to matrix-assisted laser desorption and ionization (MALDI) mass spectrometry is discussed.     

Linking structure and nanomechanical properties via instrumented nanoindentations on well-defined and fine-tuned morphology poly(ethylene)

Several poly(ethylene) samples with a broad range of morphologies were studied in this work using nanoindentations. The samples had degrees of crystallinity ranging from 30 to 100% while their Young's modulus ranged from few tens of MPa up to several GPa. Experimental conditions for the correct evaluation of Young's modulus were at first identified, choosing a suitable loading rate in order to minimize viscoelastic effects on the unloading. The force curves, i.e., plots of applied load vs. penetration depth, were then analyzed following two common procedures available in the literature. None of these procedures leads to satisfying results when compared to other experimental techniques. However, it was found that a recently proposed correction factor to the Oliver and Pharr procedure allows to evaluate reliably Young's modulus of the poly(ethylene) samples exhibiting very different, fine-tuned morphologies.     

Selection of coal for small district-heating stations in Poland as a method of avoiding investments in flue-gas desulphurization

Poland is one of the biggest producers of hard coal in the world and uses its domestic coal for electricity and heat generation: 42 million tons for electricity and heat production in power industry, and about 8–10 million tons used by small district-heating stations annually. Changes in demand for coal, destined for heat generation, result from the changes in the forecast structure of energy carriers to be used by local heating stations and the new emission standards coming, this year, into effect in Poland. To meet the regulations, the heat generators have to keep to environmental requirements. The cheapest solution is to burn the compliance coal. The comparison of the forecasts for coal demand and supply and the possibility of adjusting quantitative and qualitative requirements of the smaller coal consumers points out that it would be possible, when the market rules, to heal the situation between coal producers and coal consumers in Poland.     

Interactions among Lacosamide and Second-Generation Antiepileptic Drugs in the Tonic-Clonic Seizure Model in Mice

Combination therapy with two or three antiseizure medications (ASMs) is sometimes a preferred method of treatment in epilepsy patients. (1) Background: To detect the most beneficial combination among three ASMs, a screen test evaluating in vivo interactions with respect to their anticonvulsant properties, was conducted on albino Swiss mice; (2) Methods: Classification of interactions among lacosamide (LCM) and selected second-generation ASMs (lamotrigine (LTG), pregabalin (PGB), oxcarbazepine (OXC), and topiramate (TPM)) was based on the isobolographic analysis in the mouse maximal electroshock-induced seizure (MES) model. Interactions among LCM and second-generation ASMs were visualized using a polygonogram; (3) Results: In the mouse MES model, synergy was observed for the combinations of LCM + TPM + PGB and LCM + OXC + PGB. Additivity was reported for the other combinations tested i.e., LCM + LTG + TPM, LCM + LTG + PGB, LCM + LTG + OXC, and LCM + OXC + TPM in this seizure model. No adverse effects associated with triple ASM combinations, containing LCM and second-generation ASMs were observed in mice; (4) Conclusions: The combination of LCM + TPM + PGB was the most beneficial combination among the tested in this study, offering synergistic suppression of tonic-clonic seizures in mice subjected to the MES model. Both the isobolographic analysis and polygonogram method can be recommended for experimental epileptology when classifying interactions among the ASMs.     

Application of Freezing and Thawing in Apple (Malus domestica) Juice Extraction

The paper presents the results of the research on the impact of enzymatic liquefaction, freezing and thawing on the efficiency of juice pressure extraction from apple pulp and quality of the obtained juices. The research was conducted using three types of pretreatment prior the pressing: crushing and enzymatic liquefaction in temperature of 25 °C, crushing and enzymatic liquefaction in temperature of 45 °C and crushing followed by freezing and thawing of the pulp. The study included three varieties of apples. The juice was obtained using a laboratory basket press. It was determined that the pretreatment of the pulp as well as the varietal characteristics of the fruits have a significant impact on the efficiency of the pressure extraction process. The enzymatic treatment of the pulp, irrespective of the temperature at which it was conducted, significantly increased the efficiency of the process. No effect of the temperature (25 or 45 °C) of enzymatic treatment on the efficiency of the pressure extraction process was found. Pretreatment of the pulp based on freezing and thawing contributes to the increase of efficiency of pressing in the case of two apple cultivars, that is, Idared and Red Delicious. It was showed that total phenolic content, antioxidant activity, the soluble solids content and juice acidity (pH) depend on the pretreatment of the pulp and the varietal characteristics of apples. Following the application of pretreatment of the pulp, an increase was observed in the content of polyphenols and in the antioxidant activity of the juices obtained.     

The Role of Hexokinase and Hexose Transporters in Preferential Use of Glucose over Fructose and Downstream Metabolic Pathways in the Yeast Yarrowia lipolytica

The development of efficient bioprocesses requires inexpensive and renewable substrates. Molasses, a by-product of the sugar industry, contains mostly sucrose, a disaccharide composed of glucose and fructose, both easily absorbed by microorganisms. Yarrowia lipolytica, a platform for the production of various chemicals, can be engineered for sucrose utilization by heterologous invertase expression, yet the problem of preferential use of glucose over fructose remains, as fructose consumption begins only after glucose depletion what significantly extends the bioprocesses. We investigated the role of hexose transporters and hexokinase (native and fructophilic) in this preference. Analysis of growth profiles and kinetics of monosaccharide utilization has proven that the glucose preference in Y. lipolytica depends primarily on the affinity of native hexokinase for glucose. Interestingly, combined overexpression of either hexokinase with hexose transporters significantly accelerated citric acid biosynthesis and enhanced pentose phosphate pathway leading to secretion of polyols (31.5 g/L vs. no polyols in the control strain). So far, polyol biosynthesis was efficient in glycerol-containing media. Moreover, overexpression of fructophilic hexokinase in combination with hexose transporters not only shortened this process to 48 h (84 h for the medium with glycerol) but also allowed to obtain 23% more polyols (40 g/L) compared to the glycerol medium (32.5 g/L).     

The structure and spectroscopy of lanthanide(III) complexes with picolinic acid N-oxide in solution and in the solid state

The spectroscopic characteristics and the crystal structure of Eu(III) complex with picolinic acid N-oxide ligand, picNO, at room and liquid-nitrogen temperatures are discussed. Studies concerning the Eu(III) ion luminescence (intensity, luminescence lifetime measurements, and excitation spectra of the ⁵D₀ → ⁷F₀ transition) are presented. The selective excitation luminescence spectroscopy of Eu(III) in the range of the ⁵D₀ → ⁷F₀ transition is used for the study of Eu/picNO complexes in solution equilibria. In the crystal the complex molecules build the two-dimensional structures with additional Na⁺ cations and water molecules. This structure consists of edge-sharing chains of Na distorted octahedral, interconnected by Eu polyhedra (distorted square antiprisms). The ligand, pyridine-2-carboxylate-1-oxide, coordinates to the Eu(III) ion as an ionic bidentate chelate, forming the Na[Eu(picNO)₄] complex of six-membered chelate rings with the bite angles of ca. 70.5°. The complex is symmetrical; the Eu(III) ion is eight-coordinated.     

Sorption of SPADNS azo dye on polystyrene anion exchangers: Equilibrium and kinetic studies

The sorption of SPANDS from aqueous solution onto the macroporous polystyrene anion exchangers of weakly basic Amberlyst A-21 and strongly basic Amberlyst A-29 in a batch method was studied. The effect of initial dye concentration and phase contact time was considered to evaluate the sorption capacity of anion exchangers. Equilibrium data were attempted by various adsorption isotherms including the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models. A comparison of kinetic models applied to the adsorption rate constants and equilibrium sorption capacities was made for the Lagergren first-order, pseudo second-order and Morris–Weber intraparticle diffusion kinetic models. The results showed that the adsorption isotherm is in the good agreement with the Langmuir equation and that the adsorption kinetics of SPADNS on both anion exchangers can be best described by the pseudo second-order model.