余热利用系统多目标优化模型及应用

以炭黑生产中的余热利用系统为背景建立了余热利用系统多目标优化规划数学模型;阐述了模型的求解方法;给出了实例分析。     

山西塔儿山地区金成矿的构造控制因素

本文通过分析晋南塔儿山地区的构造特征，探讨了该区金成矿作用的构造控制因素。     

统计复用信道的数字用户环路复用设备

将信道传输容量动态分配技术应用于数字用户环路复用设备中，可用效地解决复用设备线路复用率和话音传输质量之间的矛盾，从而使复用设备具有最佳的传输效果。本文介绍了一种性能优良的统计复用信道的数字用户环路复用设备。     

Analysis of characteristic odors from human male axillae

A number of studies concerning the analysis of axillary odors have assumed that the characteristic odor produced in the axillae is due to volatile steroids and isovaleric acid. Organoleptic evaluation of Chromatographic eluants from axillary extracts was employed to isolate the region in the chromatogram where the characteristic odor eluted. The odor of the dissolved eluant was eliminated when it was treated with base, suggesting that acids make up the characteristic axillary odor. Subsequent extraction of the pH-adjusted axillary extract in conjunction with organoleptic evaluation of the Chromatographic eluant, preparative gas chromatography, and analysis by GC-MS as well as GC-FTIR showed the presence of a number of C₆ to C₁₁ straight-chain, branched, and unsaturated acids as important contributors to the axillary odor. The major odor component is (E)-3-methyl-2-hexenoic acid. Three homologous series of minor components are also important odor contributors; these consist of the terminally unsaturated acids, the 2-methyl-C₆ to -C₁₀ acids and the 4-ethyl-C₅ to -C₁₁ acids. These types of acids have not been reported previously as components of the human axillary secretions and have not been proposed previously as part of the principal odor components in this area.     

偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

纳米4-H碳化硅薄膜的掺杂现象

对纳米晶SiC薄膜进行了P和B的掺杂,B掺杂效率比P高,其暗电导预前因子与激活能遵守Meyer-Neldel规则,并有反转Meyer-Neldel规则出现.掺杂效率比非晶态碳化硅薄膜高是纳米碳化硅薄膜的特点之一.非晶态中的隧穿和边界透射对输运有一定贡献.     

YAG激光熔覆的研究现状与发展趋势

本文介绍了YAG激光熔覆的特点，并与CO2激光进行了比较，显示了YAG激光熔覆的优势和潜力。叙述了YAG激光熔覆的研究进展及其应用前景。     

Adiabatic shear bands on the titanium side in the titanium/mild steel explosive cladding interface: Experiments, numerical simulation, and microstructure evolution

The microstructure and microtexture in adiabatic shear bands (ASBs) on the titanium side in the titanium/mild steel explosive cladding interface are investigated by means of optical microscopy, scanning electron microscopy/electron backscattered diffraction (SEM/EBSD), and transmission electron microscopy (TEM). Highly elongated subgrains and fine equiaxed grains with low dislocation density are observed in the ASBs. Microtextures (25 deg, 75 deg, 0 deg), (70 deg, 45 deg, 0 deg), and (0 deg, 15 deg, 30 deg) formed within the ASBs suggest the occurrence of the recrystallization. The grain boundaries within ASBs are geometrically necessary boundaries (GNBs) with high angles. Finite element computations are performed to obtain the effective strain and temperature distributions within the ASBs under the measured boundary conditions. The rotation dynamic recrystallization (RDR) mechanism is employed to describe the kinetics of the nanograins’ formation and the recrystallized process within ASBs. During the deformation time (about 5 to 10 μs), the following processes take place: dislocations accumulate to form elongated cell structures, cell structures break up to form subgrains, and subgrains rotate and finally form recrystallized grains. The small grains within ASBs are formed during the deformation and do not undergo significant growth by grain boundary migration after deformation.     

氢化非晶硅磷掺杂工艺条件的研究

本文对氧化非晶硅磷掺杂的工艺条件进行了研究，得出掺磷氢化非晶硅的电导率随衬底温度、气体流量、气体压力、射频功率、淀积时间的变化关系，为非晶硅的有效掺杂和器件研究提供了依据。