Effects of home preparation on pesticide residues in cabbage

Experiment was carried out to evaluate the pesticides (chlorpyrifos, p,p-DDT, cypermethrin, chlorothalonil) residue levels in cabbage in the process of home preparation by washing with different concentrations of acetic acid and sodium chlorine, and tap water, preserving in refrigerator, and stir-frying for different time. Results showed that washing by tap water and/or detergent solution for cooking are necessary to decrease the concentration of pesticide residues in cabbage. Washing with acetic acid solutions (at 10% concentration for 20 min) caused 79.8%, 65.8%, 74.0% and 75.0% loss of the above pesticides, respectively. Washing with NaCl solutions (at 10% concentration for 20 min) produced 67.2%, 65.0%, 73.3% and 74.1% loss, respectively, and washing by tap water (for 20 min) were 17.6%, 17.1%, 19.1% and 15.2% loss, respectively. The reductions due to the refrigeration (for 48 h) were 3.4%, 2.6%, 3.1% and 3.6%, respectively, and those due to the stir-frying (for 5 min) were 86.6%, 67.5%, 84.7% and 84.8%, respectively. The data indicated that washing by detergent solutions and stir-frying of cabbage are the most effective home preparations for the elimination of pesticide residues.     

Oscillating superleak transducer of second sound: Amplitude and linewidth

Two oscillating superleak transducers, one serving as generator, the other as detector, of first and second sound, situated at opposite ends of a one-dimensional resonance cavity, are considered. Included in the analysis are the dissipative effects of normal viscous slip and thermal diffusion through the porous membrane. The calculated amplitude and linewidth of the receiver response, both close to and away from the membrane resonance, show good agreement with available experimental data.     

Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution

The potentiodynamic polarization measurement of 254SMO stainless steel (UNS 31254) was conducted in 3.5% NaCl solutions with pH ranging from 0.1 to 5. The results indicated that this stainless steel offered excellent pitting corrosion resistance in corrosive environments. Further, it also exhibited various features on the polarization curves in different pH solutions. The electrochemical constant-potential passivation treatment performed at different pH followed by XPS analysis revealed that the primary constituents of the outermost layer of the passive films formed in the weak (pH 5) and strong (pH 0.8) acid solutions are iron oxides and Cr₂O₃ and Cr(OH)₃, respectively. Molybdenum oxides, primarily in the six-valence state, existed in the outermost layer of the passive film. Only very weak signals corresponding to that of nickel oxides were detected in the film formed in the weak acid (pH 5) solution. The ICP-MS analyses indicated selective dissolution of a significant amount of Fe and a few Mo and Ni ions during the passivation treatment in the strong acid (pH 0.8) solution. No Cr dissolution was observed; this indicated that the Cr in the film is relatively stable. XPS depth profiling results showed that a similar bilayer-structured film was formed in both the solutions (pH 0.8 and 5); the outer layer of this film is primarily composed of Cr(OH)₃ and Mo(VI), and the inner layer, Cr₂O₃ and Mo(IV). The results of the examinations of passive film formations and dissolution by XPS and ICP-MS were consistent with the polarization curves.     

一种新型特级防火卷帘的研究与开发——3J特级防火卷帘

介绍3J特级防火卷帘的各种重要功能特点,讨论其实用性与易用性以及推广该产品的必要性与可行性。     

Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.     

重构在框架开发中的研究与应用

框架和应用能够通过重构相互促进,应用和框架的并行开发可以加速框架的开发过程.从框架与应用的中间层,框架与应用的接口的结构和形式等方面,对此过程中的重构方法进行了讨论,提出了几种适应于框架与应用并行开发的重构手段.     

Pattern search algorithms for nonlinear inversion of high-frequency Rayleigh-wave dispersion curves

Inversion of Rayleigh wave dispersion curves is challenging for most local-search methods due to its high nonlinearity and to its multimodality. In this paper, we implemented and tested a Rayleigh wave dispersion curve inversion scheme based on GPS Positive Basis 2N, a commonly used pattern search algorithm. Incorporating complete poll and complete search strategies based on GPS Positive Basis 2N into the inverse procedure greatly enhances the performance of pattern search algorithms because the two steps can effectively locate the promising areas in the solution space containing the global minima and significantly reduce the computation cost, respectively.The proposed inverse procedure was applied to nonlinear inversion of fundamental-mode Rayleigh wave dispersion curves for a near-surface shear (S)-wave velocity profile. The calculation efficiency and stability of the inversion scheme are tested on three synthetic models and a real example from a roadbed survey in Henan, China. Effects of the number of data points, the reduction of the frequency range of the considered dispersion curve, errors in P-wave velocities and density, the initial S-wave velocity profile as well as the number of layers and their thicknesses on inversion results are also investigated in the present study to further evaluate the performance of the proposed approach.Results demonstrate that pattern search algorithms applied to nonlinear inversion of high-frequency surface wave data should be considered good not only in terms of accuracy but also in terms of the computation effort due to their global and deterministic search process.     

半刚性连接节点对有侧移钢框架稳定承载力的影响

随着对梁柱节点性能研究的深入,发现连接性能对结构性能有着很大的影响,同时在进行结构柱构件稳定计算时必须考虑柱端约束条件,因此需要将柱端连接性能的影响反映到约束条件中去.现有规范并未就如何考虑连接半刚性性能对柱构件计算长度的影响作出可供直接采用的计算方法.结合规范的制订依据提出了考虑连接性能对柱计算长度影响的计算方法;全盘考虑连接性能对层间整体稳定的影响.     

加快改革解决电煤供需问题

分析了电力行业煤炭采购垄断的弊端。提出要用市场手段和改革的作法解决电煤供需的问题，探索发展多种形式的煤炭资源配置方式，提高能源经济运行的质量。     

宣钢1260 m3高炉扩容大修改造设计

宣钢l260m^3高炉大修改造时将炉容扩大到l350m^3，对高炉本体系统设备及冷却系统、自动控制及检测系统进行了全面的改造更新，在炉腹、炉腰及炉身下部高热负荷区域采用铜冷却壁，取消炉身中上部铸铁冷却壁凸台，并采用薄内衬等先进、适用、可靠、成熟的技术。