Effects of an organic phosphorus nucleating agent on crystallization behaviors and mechanical properties of poly(propylene)

The effects of an organic phosphorus nucleating agent on the crystallization behavior and mechanical properties of poly(propylene) were investigated. As the concentration of nucleating agent increased from 0 to 0.8%, the tensile and flexural strengths of the nucleated poly(propylene) resin increased by 15%, the flexural modulus increased by 35%, the crystallization peak temperature increased by 10°C, and the nucleation density (calculated with the nonlinear Voltrra integral equation) increased by 10⁶ times. Mechanical properties increased with nucleation density. Linear equations between the mechanical properties and the logarithmic nucleation density were revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 297–301, 2003     

PAMAM接枝稻草对Nd3+、Sm3+、La3+的吸附特性

以环氧氯丙烷为交联剂,将聚酰胺胺树状大分子(PAMAM)接枝到稻草基体上,利用FTIR、SEM、XRD、TG等对其结构进行了表征和分析。考察了其对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附性能,探讨了吸附时间、稀土金属离子浓度、吸附温度、溶液pH等因素对吸附性能的影响。同时对吸附过程的动力学、吸附等温线和吸附热力学进行了研究。结果表明,所制备的吸附剂对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附平衡时间约为4 h,平衡吸附量分别为47.14、40.11和50.12 mg/g。吸附过程符合拟二级动力学模型和Freundlich等温线,表明此吸附过程是属于化学吸附过程。吸附热力学研究表明,此吸附过程是自发进行的,同时吸附过程是一个混乱度增加的熵增过程。     

3-羟基-7-氧代-5,6-二氢吡唑[3,4-e]并-1,2,4-三嗪的合成

以3-氨基-5-吡唑啉酮为原料,合成了3-羟基-7-氧代-5,6-二氢吡唑[3,4-e]并-1,2,4-三嗪,并对目标物及文献中未见报道的中间体如3-氨基-5-氧代-4-吡唑啉酮腙衍生物等,通过元素分析I、R1、HNMR和质谱分析确定了其结构。     

Sequestration of Cesium and Strontium by Tobermorite Synthesized from Fly Ashes

Tobermorites were synthesized from oxides and from fly ashes under mild hydrothermal conditions. The bulk compositions of the ash-based formulations were adjusted to give the same [Ca]/[Si + Al] ratio as for the oxides. Selective Cs and Sr exchange with these tobermorites was measured. Compared to those prepared from the oxides and from class C fly ash, the tobermorites obtained from class F fly ash exhibited superior Cs and Sr selective properties. This is apparently a result of more extensive Al incorporation with class F fly ash. For example, tobermorite synthesized from class F fly ash exhibited a cesium K _d (mL/g) of 3826 while those prepared from oxides and from class C fly ash showed K _d values of 1112 and 796, respectively, under the same conditions. These results suggest that fly ash waste materials can be converted into tobermorite, which can serve as a resource in the separation, immobilization, and disposal of radioactive species such as Cs and Sr.     

RT-PCR法检测庚型肝炎病毒C(GBV-C)RNA

应用RT－PCR法在非甲～非戊型肝炎患者血清及单采浆站供血员血浆中检测到GBV－CRNA，扩增产物经序列测定进一步确证，在30例非甲～非戊型肝炎患者中阳性率为6．6％；在600例单采浆供血者血浆中阳性率为0．33％。提示GBV－C可能不是非甲～非戊型肝炎的主要致病因子，可能存在GBV－C健康携带者。     

连续式双膜分离塔的数学模型

本文建立了适用于连续式双膜分离塔的数学模型。用实验数据验证了数学模型的可行性和合理性。将本模型与已发表的模型进行了比较,结果表明本模型具有形式简单、计算方便和适用范围更宽广等优点。     

PPS树脂基DPFC耐高温隔热垫块

ＤＰＦＣ隔热垫块是以ＰＰＳ树脂为基体，以中空玻璃微珠，玻璃纤维作增强材料制得的。它能耐２２０℃以上高温，又具有隔热，承压性能，从热性能，耐高温特性，高温力学性能及工业使用效果等与进口的隔热垫块进行比较，结果表明，ＤＰＦＣ垫块完全可以替代进口垫块，可在进口或国产的各种热压机上推广使用。     

Rheological study on O−carboxymethylated chitosan/cellulose polyblends from LiCl/N,N‐dimethylacetamide solution

An O?carboxymethylated chitosan (O? CMCh) water solution (I) and N,N‐dimethylacetamide (DMAc) emulsion (II) were blended with a cellulose LiCl/DMAc solution, and corresponding polyblends (Polyblends I and II) were obtained. The rheology of the three fluids, that is, the cellulose solution and Polyblends I and II, was investigated. The cellulose solution was characterized by a power‐law fluid. When an O‐CMCh water solution or DMAc emulsion was added to the cellulose solution, the power‐law curve was preserved. The power‐law indexes (n) of all three fluids increased along with the temperature. Polyblend I displays an n close to but a little higher than that of the cellulose solution, while Polyblend II shows a much higher power index than those of the other two fluids. The values of the apparent viscosity (η_a) for all the three fluids are close and decrease along with an increase in the temperature. Adding O‐CMCh microparticles into Polyblends I and II results in a decrease in the structural viscosity index (Δη) in comparison to that of the cellulose solution, and this effect is very obvious for Polyblend I. A cellulose solution's Δη declines with the augmentation of temperature, while the Δη's of both Polyblends I and II show minimum values at about 323 K. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1719–1725, 2003     

基体树脂对长玻璃纤维增强PP力学性能的影响

采用在线混合设备制备了长玻璃纤维(LGF)增强聚丙烯(PP)复合材料(LGF-PP),研究了基体性质及界面相容剂对LGF-PP力学性能的影响。基体树脂熔体流动速率的增加,使最终LGF-PP中的玻璃纤维长度从5.63 mm增至8.56 mm,提高了力学性能。与均聚PP比较,以共聚PP为基体树脂的LGF-PP冲击强度高出约10%,但其他性能略差。界面相容剂有利于增强玻璃纤维与PP的界面结合,拉伸强度和拉伸模量明显增加,但是冲击强度降低了20%～30%。     

Anisotropic geodesics for live‐wire mesh segmentation

We present an interactive method for mesh segmentation that is inspired by the classical live‐wire interaction for image segmentation. The core contribution of the work is the definition and computation of wires on surfaces that are likely to lie at segment boundaries. We define wires as geodesics in a new tensor‐based anisotropic metric, which improves upon previous metrics in stability and feature‐awareness. We further introduce a simple but effective mesh embedding approach that allows geodesic paths in an anisotropic path to be computed efficiently using existing algorithms designed for Euclidean geodesics. Our tool is particularly suited for delineating segmentation boundaries that are aligned with features or curvature directions, and we demonstrate its use in creating artist‐guided segmentations.