热老化聚丙烯薄膜宏观力学性能及微观结构的研究

通过对热老化处理的聚内稀薄膜进行X射线衍射实验.对测得的实验数据采用X射线衍射线形分析理论处理,同时对热老化聚丙烯薄膜进行拉仲形变测量,得到材料的力学性质和微晶尺寸及内部点阵畸变的变化规律.从而将热老化聚丙烯材料宏观性质变化与微观结构联系起来,找出材料聚集态精细结构随老化时问而改变的微观规律.     

激光诱导H_2S催化裂解制备H_2的研究

在室温常压静态条件下研究了以Ｖ２Ｏ５／ＴｉＯ２为催化剂，紫外脉冲激光诱导Ｈ２Ｓ催化分解为Ｈ２和Ｓ的反应及其机理。考察了产氢量与激光不同照射条件之间的关系。     

波浪力计算中的一个新边界元方法

本文就波浪与结构物作用问题，提出了一个新的高阶边界元方法。较之Ｅａｔｏｃｋ Ｔｏｙｌｏｒ和Ｃｈａｕ的方法，本文在体内附助积分方程中应用了满足刚性水面条件和弱刚性底面条件的简单格林函数。计算速度相应地有所提高；漂浮结构的积分方程更为简洁；计算结果与Ｅａｔｏｃｋ Ｔａｙｌｏｒ和Ｃｈａｕ的方法具有几乎相同的精度和收敛速度。     

A study of stacking faults in deformed austenitic stainless steel by X-ray diffraction

Making use of the data obtained already in our laboratory on elongated, quenched samples of austenitic steel lCrl8Ni9, such as the effective domain size D_eff, the average dislocation density-ρ, the average dislocation configuration parameter, -M, the range of strain field -R_e, the elastic energy density 〈E/V〉,etc., some exact and clear expressions for the relation of intrinsic stack-ing fault (SF) density α′, extrinsic SF density α″, twin fault density β, SF energy γ, true particle size D₀, minimum value of the fault width T_min, and maximum particle size D_max are given.     

Combined-Stage Sintering Model

By focusing on the similarities between the three stages of sintering, a single equation is derived that quantifies sintering as a continuous process from beginning to end. The microstructure is characterized by two separate parameters representing geometry and scale. The dimensionless geometry parameter, denoted T, comprises five scaling factors that relate specific microstructural featuers (e.g., surface curvature) to the scale (grain diameter). Calculations of T from experimental data show (a) agreement with computer simulations of initial-stage sintering, (b) the effect of surface diffusion on T, and (c) changes in T with microstructural evolution during sintering. Application of the model to the design of firing schedules and the study of microstructural geometry effects on sintering is discussed.     

The globally Bi-3-connected property of the honeycomb rectangular torus

The honeycomb rectangular torus is an attractive alternative to existing networks such as mesh-connected networks in parallel and distributed applications because of its low network cost and well-structured connectivity. Assume that m and n are positive even integers with n ? 4. It is known that every honeycomb rectangular torus HReT(m,n) is a 3-regular bipartite graph. We prove that in any HReT(m,n), there exist three internally-disjoint spanning paths joining x and y whenever x and y belong to different partite sets. Moreover, for any pair of vertices x and y in the same partite set, there exists a vertex z in the partite set not containing x and y, such that there exist three internally-disjoint spanning paths of G-{z} joining x and y. Furthermore, for any three vertices x, y, and z of the same partite set there exist three internally-disjoint spanning paths of G-{z} joining x and y if and only if n ? 6 or m = 2.     

基于IPv6校园网的智能选课系统的J2EE架构的设计与实现

通过分析IPv6校园网自主学习模式下的自主选课问题,提出了利用J2EE技术构建基于IPv6校园网的智能选课系统的总体结构及具体实现.     

THE APPLICATION OF COKELET''''S WAVE THEORY IN THE CALCULATION OF WAVE-CURRENT FIELD

By using Cokelet's wave theory,the limiting wave height and the relative waveangular frequency in wave-current field were calculated in this paper.It is indicated by numeri-cal calculation that if the water depth is not too small,the result given by authors'calculationare very close to the results of limiting wave height by Dalrymple(1975)and to the data of rel-ative wave angular frequency by linear wave theory;but if water depth is rather small,thereare some discrepancy,     

The effect of the EAAEAE insert on the property of human metallothionein-3

MT3 shows apparently different properties and function fromMT1 even though they have 70% sequence homology. Possibly thetwo inserts, Thr5 and a negatively charged hexapeptide at position-55in MT3, play important roles. A series of MT3 variants aroundthe EAAEAE hexapeptide have been prepared by site-directed mutagenesisand their properties and reactivity towards pH, EDTA and DTNBhave been studied. Our detailed studies revealed that the EAAEAEinsert is essential to the property of MT3. It is the hexapeptideinsert, to some extent, making the MT3     

On/off cycling under multiple stresses

The authors describe an experiment, a model, and an analytic method for on/off vs. continuous policy evaluation. The methodology was developed and verified through experimentation. An experimental life-test of small DC motors was designed and performed; it involved on/off cycling vs. continuous operation under multiple stresses. A stress-factor reliability model based on the two-parameter Weibull proportional-hazards life distribution was fitted to the data. The analysis provides an estimate of the model parameters for the life distribution of the DC motors under two operating policies, while under multiple stresses. The characteristic life was related to the explanatory covariates: voltage, on/off cycling, and load. Due to the proportional hazards (common Weibull shape) nature of the model, acceleration factors were calculated to relate the stress levels. The reliability model was extended to develop a simple rule to aid in a decision between on/off cycling and continuous-run policies (to achieve higher reliability). The proposed model (with covariates) allows a much broader approach to reliability modeling than the usual Weibull model (without covariates) because it predicts the reliability under various environmental combinations