武钢“八五”技术进步的新起点

本文论述了武钢新三号高炉的建设和投产,是武钢整个“八五”技术进步的新起点,指出必须进一步完善以质量为核心的生产管理体系。     

三异丙氧基铝的制备及催化机理

本文介绍了采用新的原料予处理方法合成三异丙氧基铝，并且选择更为合理的工艺手段精制产品，同时探讨了产物的催化合成机理。     

低速爆轰管对黑火药的点传火性能研究

文章采用中心点火管结构的实验装置研究了黑火药的点传火性能。用低速爆轰 (L VD)中心点火管来点燃黑火药时 ,1# ～ 3# 大粒黑药的传火速度为 70 0 m· s-1～ 80 0 m· s-1数量级 ,燃烧波宽度在 3.1ms～ 3.5 ms,最大压力峰值 :1# 为 36 .4 MPa,2 # 为 2 4 .0 MPa,3# 为 38.0 MPa。用普通中心点火管点燃黑火药时 ,2 # 、3# 和钝化 2 # 大粒黑的传火速度分别为 6 1.2 m· s-1、6 8.2 m·s-1和 4 0 .1m· s-1,最大燃烧波宽度分别为 9.2 ms、6 .3ms和 9.5 ms。燃烧波表明 ,L VD中心传火管与普通中心传火管相比较 ,在传火管的不同位置处 ,前者的 P- t曲线一致性远高于后者。     

Optical dot gain on newsprint determined with the Lund nuclear microprobe

A technique for measuring optical dot gain, i.e. the relative difference between the actual screen dot and the optically perceived one, is presented. By combining measurements from the non-optical nuclear microprobe with data from image analyzing technique the optical dot gain can be determined. The procedure to reach pixel by pixel correlation on a micrometer scale is discussed. In the newsprint sample studied in this investigation a typical optical dot gain between 15 and 20% was deduced. The variation in the optical dot gain was correlated with other characteristic parameters of the print and newsprint and especially a positive correlation to the mass density of the newsprint was observed.     

巨型机转子机制的改进策略

本文分析了通用寄存器型计算机和通用堆栈型计算机处理转子指令的不同方法,研究了类Cray-1转子机制的实现原理,提出了在类Cray-1通用寄存器型模型机上采用堆栈来处理转子指令的实现方法。     

Effect of microwave heating on quality and mycoflora of sorghum grain

Sorghum (cv. Maldandi M35-1) was modified to 12, 14 and 16% moisture content (m.c.) and heat-treated with microwave energy at 3 levels, for 30 sec (=4.5, 9 and 18 kJ), and 60 sec (=9, 18 and 36 kJ). The effect of microwave heating on rise and subsequent fall in grain temperature, reduction in m.c. and quality characteristics including germination, seedling dry matter, free fatty acids (FFA) and contaminant fungi was determined. The temperature attained and the moisture loss in the sorghum grain was affected by grain m.c. and the time of exposure. At the lowest and highest microwave treatment level grain temperatures reached 30–40°C and 90–101°C, respectively. However, a 60-sec treatment at the highest energy level was lethal for the grain, particularly at 14 and 16% m.c. The FFA values were unaffected by microwave treatment. Statistical analyses showed that the microwave power level and time individually, and power level × time interactions were significant for most quality characteristics. The fungi present most abundantly on the sorghum grain were Eurotium spp., Aspergillus candidus, A. niger and Penicillium spp. Increasing m.c. and microwave heating resulted in elimination of most fungi after a 30-sec exposure time. With a 60-sec exposure period, practically all fungi were eliminated from the grain.     

Heat and Moisture Transfer in Wet Sand Exposed to Solar Radiation—Models and Experiments Concerning Buried Objects

One promising method of locating buried objects, such as land mines, is to use optical systems for detecting contrasts in surface temperature. With enhanced knowledge about the interacting physical processes behind these temperature contrasts, it is possible to improve detection precision. In such a context, moisture movement in the soil and moisture evaporation from the surface have been found to be of particular interest. This study was based on indoor experiments on wet and dry sand exposed to radiation from a solar panel. Simulations of heat and moisture transfer conducted with a one-dimensional model are also presented for the experiments. The calculations were successful in accurately predicting surface temperatures for both wet and dry sand, making it possible to predict surface temperatures under different conditions. These findings will contribute to increasing the probability of successful detection of buried objects under real conditions using optical methods.     

建筑构件积木式CAD软件研究

西方以混凝土坝内廓道施工样图设计阶段为例，论述水工建筑件积木式ＣＡＤ软件的必要性和积木模块ＣＡＤ软件的具体实现方法。     

激光器绝热啁啾对光纤通信系统传输特性的影响

通过理论分析、实验和计算机模拟得到：进行直接强度调制时，体块型DFB激光器的总微分量子效率（与多量子阱DFB激光器相比）过低，从而导致其绝热啁啾占激光器啁啾的主要部分；用于无再生中继距离较大的强度调制／直接检测（IM／DD）光纤通信系统时，色散效应将导致信号脉冲上升沿压缩，使系统误码率增加。据此建议：在无再生中继距离大于100～120km的常规单模光纤IM／DD系统中，应采用多量子阱激光器。     

PWM开关变换器统一建模法与谐波分析法的应用

介绍了PWM开关功率变换器电路的统一建模方法，并将谐波分析方法应用于电路分析中，理论和实例表明，这种方法容易得到电路变量的基波解和各次谐波解，以及电路的传递函数，具有容易理解和准确度较高的优点。