Polystyrene composites of single‐walled carbon nanotubes‐graft‐polystyrene

Single‐walled carbon nanotubes (SWCNTs) dispersed in N‐methylpyrrolidone (NMP) were functionalized by addition of polystyryl radicals from 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐ended polystyrene (SWCNT‐g‐PS). The amount of polystyrene grafted to the nanotubes was in the range 20‐25 wt% irrespective of polystyrene number‐average molecular weight ranging from 2270 to 49 500 g mol^?1. In Raman spectra the ratios of D‐band to G‐band intensity were similar for all of the polystyrene‐grafted samples and for the starting SWCNTs. Numerous near‐infrared electronic transitions of the SWCNTs were retained after polymer grafting. Transmission electron microscopy images showed bundles of SWCNT‐g‐PS of various diameters with some of the polystyrene clumped on the bundle surfaces. Composites of SWCNT‐g‐PS in a commercial‐grade polystyrene were prepared by precipitation of mixtures of the components from NMP into water, i.e. the coagulation method of preparation. Electrical conductivities of the composites were about 10^?15 S cm^?1 and showed no percolation threshold with increasing SWCNT content. The glass transition temperature (T_g) of the composites increased at low filler loadings and remained constant with further nanotube addition irrespective of the length and number of grafted polystyrene chains. The change of heat capacity (ΔC_p) at T_g decreased with increasing amount of SWCNT‐g‐PS of 2850 g mol^?1, but ΔC_p changed very little with the amount of SWCNT‐g‐PS of higher molecular weight. The expected monotonic decrease in ΔC_p coupled with the plateau behavior of T_g suggests there is a limit to the amount that T_g of the matrix polymer can increase with increasing amount of nanotube filler. Copyright © 2012 Society of Chemical Industry     

Probing the influence of superhydrophobicity and mixed wettability on droplet displacement behavior

The importance of fundamental understanding of droplet dynamics and the concomitant implications of wall wettability are critical in the emergent science and technology areas including digital microfluidics and clean energy conversion. In this work, mesoscopic illustration, based on the two-phase lattice Boltzmann model, of droplet dynamics in a microchannel is presented in order to unveil the role of superhydrophobicity and mixed wettability. The impact of critical physicochemical determinants, including capillary number and droplet size, is explored in the context of droplet–wettability interactions. Temporal evolution of wetted length and wetted area for a combination of wettability scenarios is furnished in detail in order to elucidate the droplet displacement dynamics. Capillary number plays an important role with disparate droplet behavioral patterns stemming from superhydrophobic and mixed-wet wall characteristics.     

Wavelength conversion using rare earth doped oxides in polyolefin based nanocomposite films

Nanocomposites are a new class of polymeric materials which include organic or inorganic nano‐phase materials. These nanocomposite films can show interesting properties which have many applications for wavelength conversion and energy saving. In this paper, we present polyolefin based nanocomposite films prepared using wavelength‐converting red ‘phosphors’ such as Y₂O₃: Eu³⁺ and LiAl₅O₈:Fe³⁺ and blue ‘phosphor’ CaMgSi₂O₆: Eu²⁺. The durability of the polymer chain is unaffected by incorporation of inorganic nanoparticles as there is no direct interaction between them. The addition of surfactant in the nanocomposite film helps to improve the dispersion ability of the nanoparticles and increase the flexibility of the polymer film. Wavelength‐converting ‘nanophosphors’ incorporated in a polymer matrix help to increase the tensile strength of the film. The films show excellent wavelength conversion ability of UV light into the visible and near IR range. These nanocomposite films have great application in energy saving devices. Copyright © 2012 Society of Chemical Industry     

Technical note Temporal remote sensing data and GIS application in landslide hazard zonation of part of Western ghat,India

Spatial and temporal multi-layered information is required to assess landslide hazard susceptibility. The manual method of data integration for targeting potential zones susceptible to landslide hazard is time consuming. The present study highlights the utility of temporal remotely-sensed data and knowledgebased Geographical Information Systems for collection, integration and analysis of spatially-oriented data, as well as in finding out the inherent relation between separate entities in parts of West ghat in India.     

Comparative study of the physico-chemical parameters of the coastal waters in rivers Matla and Saptamukhi: Impacts of coastal water coastal pollution

A qualitative and quantitative research has been performed on the physico-chemical parameters of the neighboring coastal waters of the rivers Matla and Saptamukhi in the Sunderban district, West Bengal. The distribution pattern of eight physico-chemical parameters, namely pH, salinity, dissolved oxygen, suspended solids, nitrogen and phosphorus concentrations (inorganic and total) has been graphed and compared for the two rivers over a time period of ten years (??90s decade). A statistical analysis has been carried out and the correlation data between these parameters has been rationalized based on both natural and man-made activities during that time. This has pointed to various causes behind coastal pollution of river waters. The changes in water quality have been related to flood impacts, storm surge, eutrophication, domestic sewage, agricultural and industrial wastes. In order to avoid coastal degradation and maintain environmental balance, it is very important to understand the impact of these parameters on coastal zones.     

Multifunctional glow discharge analyzer for spacecraft monitoring

In this study the main objective was to develop and demonstrate a glow discharge microplasma coupled to a miniature spectrometer for detection of fire signatures from pyrolyzing and burning spacecraft materials. Our experimental results demonstrate that combustion-produced carbonaceous aerosols can serve to identify the burning materials. Demonstrating versatility for chemistry analysis, the plasma detector could differentiate carbonaceous aerosols with different C/H ratios and distinguish inorganic samples such as salts and metal oxides from carbonaceous aerosols. In addition, in situ analysis of aerosol samples validated the microplasma’s analytical utility by linearity of its optical emission intensity with aerosol elemental composition.     

Investigation of organic n-type field-effect transistor performance on the polymeric gate dielectrics

We report a copper hexadecafluorophthalocyanine (F₁₆CuPc) based n-type organic field-effect transistor (OFET) with polymeric gate dielectrics with different physical/electrical properties. The gate dielectrics are four types of cross-linked poly(4-vinylphenol) and newly prepared poly(4-phenoxy methyl styrene) and those are characterized based on surface tension, leakage current and capacitance. The performance of F₁₆CuPc OFETs with those gate dielectrics was compared. We found that the composition of the gate dielectrics and the interfacial interaction of F₁₆CuPc with the gate dielectric play a decisive role in the performance of OFETs. The effect of physical/electrical properties, composition and processing condition of the gate dielectrics on the device performance was investigated.     

Optimization of conditions for hydrogen production from complex dairy wastewater by anaerobic sludge using desirability function approach

Present study deals with the multiple-response optimization for biohydrogen production using anaerobic sludge and outstanding approach to overcome the drawbacks of conventional response surface methodology (RSM). Dairy wastewater was used as source in batch fermentation was followed for this study. Response surface methodology (RSM), based on a three level, four variable Box–Behnken design, was employed to obtain the best possible combination of substrate concentration, pH, COD/N ratio and COD/P ratio for maximum H₂ yield (HY) and specific hydrogen production rate (SHPR). Experimental data were evaluated by applying RSM integrating a desirability function approach. The optimum H₂ yield and SHPR conditions were: substrate concentration 15.3 g COD/L, pH 5.5, COD/N ratio 100.5 and COD/P ratio 120 with maximum overall desirability D of 0.94. The confirmation experiment under these optimal condition showed a HY and SHPR of 13.54 mmol H₂/g COD and 29.91 mmol H₂/g-VSS.d, respectively. This was only 0.22% and 0.20%, respectively, different from the predicted values, suggesting that the desirability function approach with RSM was a useful technique to get the maximum H₂ yield and SHPR simultaneously.     

Swelling behaviour of a geofiber-reinforced expansive soil

This paper reports the results of laboratory study performed on expansive soil reinforced with geofibers and demonstrates that discrete and randomly distributed geofibers are useful in restraining the swelling tendency of expansive soils. Swelling characteristics of remoulded expansive soil specimens reinforced with varying fiber content (f = 0.25% and 0.50%) and aspect ratio (l/b = 15, 30 and 45) were studied. One-dimensional swell-consolidation tests were conducted on oedometer specimens. Reduction in heave and swelling pressure was the maximum at low aspect ratios at both the fiber contents of 0.25% and 0.50%. Finally, the mechanism by which discrete and randomly distributed fibers restrain swelling of expansive soil is explained with the help of soil–fiber interaction.