Embedded deterministic test for low-cost manufacturing

You have probably heard that BIST takes too long and its fault coverage is low, and that deterministic test requires too many patterns. This article shows how on-chip compression and decompression techniques provide high fault coverage with low test times.     

Simplified steady-state model of an SCR-inverter-basedload-commutated commutatorless series motor

This paper presents a simplified analytical model of a silicon-controlled-rectifier based, load-commutated inverter driven, commutatorless series motor to predict its speed-current, torque-current and torque-speed characteristics. The model has been formulated, keeping in view the steady state equivalent circuit of a conventional DC series motor. The proposed analytical expressions relating torque and current with speed are found to follow an inverse law and that relating torque and current is found to be parabolic, as is expected in a "series" machine. The drive has been implemented, loaded with a DC generator and experimentally similar characteristics have been obtained, as predicted by the analytical model. The characteristics obtained experimentally are seen to follow the ones, predicted by the analytical model closely     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

Node and element resequencing using the Laplacian of a finite element graph: Part I—General concepts and algorithm

A Finite Element Graph (FEG) is defined here as a nodal graph (G), a dual graph (G*), or a communication graph (G˙) associated with a generic finite element mesh. The Laplacian matrix ( L (G), L (G*) or L (G˙)), used for the study of spectral properties of an FEG, is constructed from usual vertex and edge connectivities of a graph. An automatic algorithm, based on spectral properties of an FEG (G, G* or G˙), is proposed to reorder the nodes and/or elements of the associated finite element mesh. The new algorithm is called Spectral PEG Resequencing (SFR). This algorithm uses global information in the graph, it does not depend on a pseudoperipheral vertex in the resequencing process, and it does not use any kind of level structure of the graph. Moreover, the SFR algorithm is of special advantage in computing environments with vector and parallel processing capabilities. Nodes or elements in the mesh can be reordered depending on the use of an adequate graph representation associated with the mesh. If G is used, then the nodes in the mesh are properly reordered for achieving profile and wavefront reduction of the finite element stiffness matrix. If either G* or G˙ is used, then the elements in the mesh are suitably reordered for a finite element frontai solver, A unified approach involving FEGs and finite element concepts is presented. Conclusions are inferred and possible extensions of this research are pointed out. In Part II of this work,¹ the computational implementation of the SFR algorithm is described and several numerical examples are presented. The examples emphasize important theoretical, numerical and practical aspects of the new resequencing method.     

Exact solutions for characterization of electro-elastically graded materials

The present paper deals with a class of functionally graded materials (FGM), called active FGM that has electro-elastically graded material phases. An active FGM system leads to minimization of stress concentration that arises due to mismatch in the electrical and elastic properties of the constituent phases. This work focuses on the characterization of the through thickness stresses of an active FGM subjected to electrical excitation. The structure is comprised of a substrate, an electro-elastically graded layer and an active layer. A formulation for exact solutions of the system based on Euler–Bernoulli theory is presented. Power-law variation of the composition of the two phases in the graded layer is considered. Performance of linearly gradient FGM for a range of stiffness and electrical property ratios of the active and substrate materials have been studied. It is observed that the electrical strain component and the compositional gradation significantly influence the stress characteristics of the active FGM.     

Effect of sillimanite beach sand composition on mullitization and properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

Mullite was developed by reaction sintering of sillimanite beach sand and calcined alumina. Two varieties of sillimanite beach sand viz. S and Z having different compositions were selected. Synthesis and properties of mullite were very much dependent on the sillimanite beach sand composition. Presence of higher amount of impurities in the Z-variety of sillimanite sand favours the densification by liquid phase formation. Presence of zircon in Z-variety increases the hardness and fracture toughness. Alumina addition improves the mechanical/thermomechanical properties of the samples. Mullite retains the usual orthorhombic habit of sillimanite. Rounded to sub rounded zirconia dispersed within the mullite matrix of the sample ZA is noticed.     

Plasma membrane phospholipid fatty acid composition of cultured skin fibroblasts from schizophrenic patients: comparison with bipolar patients and normal subjects

Recent studies have found lower red cell plasma membrane contents and composition of the long chain polyunsaturated essential fatty acid derivatives, particularly arachidonic acid and docosahexaenoic acid, in a subgroup of chronic schizophrenic patients. These fatty acids are particularly enriched in the brain. Red blood cell levels of fatty acids are influenced by diet, medications, and other factors. Cell plasma membrane compositions of arachidonic and docosahexaenoic acids were therefore examined in cultured skin fibroblasts from 12 schizophrenic patients, 8 of whom were drug-naive and in a first episode of psychosis, 6 bipolar patients, and 8 normal control subjects. Docosahexaenoic acid as well as total n-3 essential fatty acid contents were significantly lower in cell lines from schizophrenic patients than in cell lines from bipolar patients and normal subjects, with no difference between the latter two groups. Arachidonic acid levels did not differ across the groups. The essential fatty acid profile observed is consistent with deficient delta-4 desaturase activity in schizophrenic patients.