Effect of particle dimension on biocompatibility of carbon nanomaterials

With various emerging applications ranging from medicine to materials and electronics, the risk of exposure to nanomaterials is rapidly increasing. Several routes of exposure to nanomaterials exist; the most important being dermal contact and inhalation. In this dermal toxicity study, the cellular effects of carbon-based materials with diameters ranging from micro- to nano-dimension were investigated using mouse keratinocytes (HEL-30). The carbon materials tested included carbon fibers (CF; 10 μm diameter), carbon nanofibers (CNF; 100 nm diameter), multi-walled carbon nanotubes (MWCNT; 10 nm diameter), and single-walled carbon nanotubes (SWCNT; 1 nm diameter). CF and CNF did not significantly affect cell viability; however, MWCNT and SWCNT reduced cell viability in a time-dependent manner up to 48 h, with full recovery of mitochondrial function by the 72 h time point. After a 24 h exposure, cells exposed to MWCNT produced up to 3-fold higher increase in reactive oxygen species than those exposed to SWCNT. The results of this study suggest that high-aspect ratio carbon material toxicity is dependent on dimension and composition.     

Dielectric properties of SBR vulcanizates loaded with HAF carbon black and BaTiO3 ceramics

The influence of HAF carbon black and BaTiO₃ ceramic powder contents in SBR vulcanizates on the dielectric constant (ε′) at different frequencies and at fixed temperature of 303 K is studied well in this article. The temperature dependence of the ac conductivity (σ_ac) was also studied. ε′ appreciably decreases as frequency increased for both filled and unfilled SBR vulcanizates. At each frequency, ε′ gradually decreased with BaTiO₃ loading, but its change at any fixed frequency with BaTiO₃ filler loading is not uniform. For HAF group ε′ (at loading ≥ 40 phr), drops rapidly with frequency. Meanwhile, it increased appreciably beyond a certain HAF filler loading (≈ 20 phr). Experimental values of the dielectric constant of both BaTiO₃ and HAF contents were compared with those calculated by using Tsangaris, Clausius and Bruggman models. Tsangaris model with simple modifications was applied and a fairly good agreement was obtained. The HAF particles or aggregates was found to take the shape of oblate ellipsoids with the minor axes parallel to the applied frequency as detected from the decreasing behavior of the depolarizing factor (Y) with HAF contents. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2227–2234, 2007     

Effect of competitive interference on the biosorption of lead(II) by Chlorella vulgaris

Batch experiments were carried out to asses the effect of Cu(II) and Zn(II) on the biosorption of lead(II) ions by non-living Chlorella vulgaris. The uptake of Pb(II) was examined for single, binary and ternary solutions at different initial concentrations and different pH values. The experimental results showed that the uptake increased with increasing pH from 3.0 to an optimum value of 5.0. The biosorption of Pb(II) was found to be adversely affected by the presence of Cu(II) ions, while Zn(II) ions seemed to have negligible effect on the process. The equilibrium data were fitted to four isotherm models: Langmuir, Freundlich, Sips and Dubinin–Radushkevich; the Sips isotherm gave the best fit for the data. Modeling of the controlling mechanisms indicated that both intrinsic kinetics and mass transfer played major roles in controlling the process. A new dimensionless parameter, Ψ, was defined to asses the relative contributions of the two mechanisms to the biosorption of lead(II). Mass transfer seemed to be the dominant mechanism at low initial lead(II) concentrations, while intrinsic kinetics dominates at high concentrations.     

Hydrodynamics of gas fluidized beds with mixture of group D and B particles

The dynamics of a gas‐solid fluidized bed containing Geldart Group D particles mixed with a small proportion of Geldart Group B particles are investigated using pressure fluctuations data. Time series analysis, using a variety of nonlinear dynamics tools, shows that the slugging present with Group D particles can be suppressed by the addition of a small proportion of Group B particles. The power spectra and the auto‐correlation function are used for a preliminary evaluation of dominant slug frequencies. It is shown that the bed fluidized with the mixture of Group D and B particles behaves in a less periodic manner and is dominated by more random bubble motion. On the other hand, the correlation integral is used to analyze the chaotic behaviour of the flow, through evaluation of the fractal structure of the reconstructed attractors. It is shown that the bed fluidized with Group D particles is characterized by a combination of steady slug motion and irregular particles motion. The behaviour of the fluidized bed of Group D/B particles mixture is characterized by a single correlation dimension for a wide range of fluidization velocities.     

Integration Concepts for the Fabrication of LTCC Structures

At the Keck Smart Materials Integration Laboratory at Penn State University, low-temperature co-fired ceramic (LTCC) material systems have been used to fabricate a number of devices for a variety of applications. This article presents an overview of the integration of the concepts and materials that we have used to achieve miniaturization and unique device function. Examples of microwave filters, metamaterial antennas, and a dielectrophoretic cell sorter will be presented, with emphasis on device modeling and design, prototype construction methods, and test results.     

MIRRE approach: nonlinear and multimodal exploration of MIR aggregated search results

Multimedia Tools and Applications - Nowadays, web users frequently explore multimedia contents to satisfy their information needs. The exploration approaches usually provide linear interaction...     

Cryptanalysis of an embedded systems’ image encryption

Multimedia Tools and Applications - Recently, a new image encryption-scheme for embedded systems based on continuous third-order hyperbolic sine chaotic system, has been proposed. The...     

Iris-based human identity recognition with machine learning methods and discrete fast Fourier transform

Innovations in Systems and Software Engineering - One of the most important modules of computer systems is the one that is responsible for user safety. It was proven that simple passwords and...     

UV-shielding by a polyurethane/f-Oil fly ash-CeO2 protective coating

A waste material called oil fly ash (OFA) was acid-functionalized, yielding f-OFA-COOH, which was then reacted with cerium oxide (CeO₂) to make CeO₂-functionalized OFA, or f-OFA-CeO₂. Pristine OFA and f-OFA-CeO₂ were used to make waterborne polyurethane (WBPU) dispersions, referred to as WBPU/OFA and WBPU/f-OFA-CeO₂, respectively, with defined OFA and f-OFA-CeO₂ content. All the dispersions were applied to mild steel as organic coatings to evaluate their protective properties, such as their hydrophobicity, adhesive strength and UV-shielding resistance. These protective properties varied based on the OFA and f-OFA-CeO₂ content. The highest water contact angle, minimum water swelling and maximum adhesive strength were found using WBPU/f-OFA-CeO₂-20 coating (using 2.00 wt% f-OFA-CeO₂), which also showed the maximum ultraviolet (UV) absorption via UV–vis spectroscopy analysis. This UV shielding result also matched field test results, as that coating was found to exhibit the lowest UV degradation near a marine atmosphere, as shown by X-ray photoelectron spectroscopy (XPS) analysis. The least affected hydrophobicity was also recorded for the sample with the WBPU/f-OFA-CeO₂-20 coating.     

Progress and challenges in sustainability,compatibility, and production of eco-composites: A state-of-art review

Owing to economic and environmental benefits, new generations of materials/commodities follow “from waste to wealth” strategy. Recently, there has been a huge upsurge in research on the development of eco-composites using recycled plastic polymers and agro-residues because the eco-composites satisfy the stringent environment regulations and are cost-effective. Herein, we present a detailed review on the potential use of several types of natural fillers as an efficient reinforcement for recycled plastic polymers. In particular, the characterization of different categories of eco-composites according to their morphological, physical, thermal, and mechanical properties is extensively reviewed and their results are analyzed, compared, and highlighted. Furthermore, a framework to produce functional eco-composites, which includes functionalization of ingredients, critical issues on microstructural parameters, processing, and fabrication methods, is outlined and supported with sufficient data from the literature. Finally, the review outlines the emerging challenges and future prospects of eco-composites to be addressed by interested researchers to bridge the gap between research and commercialization of such a class of material. Overall, the acquired knowledge will guide researchers, scientists, and manufacturers to plan, select, and develop various forms of eco-composites with enhanced properties and optimized production processes.