Residual amounts of chlorophylls and pheophytins in refined edible oils

The quantities of chlorophyll (CHL) A and B, and pheophytin (PHY) A and B in 10 kinds of refined edible oils were estimated by the fluorometric method. The results revealed that CHL and PHY were present in commercial edible oils. PHY A showed the highest content at ca. 67% in total pigments. Compositional ratios of CHL and PHY were similar in different kinds of plant oils. Through the analysis of rapessed oils at every refining step, we determined that PHY is not formed during oil refining. In the autoxidation of soybean oils to which various amounts of CHL mixtures had been added, the peroxide value of tested oils increased in proportion to the total chlorophyll content. In addition, the compositional changes of the 4 components during autoxidation were investigated.     

Photocatalytic H2 evolution under visible light irradiation on Zn1-x Cu x S solid solution

The H₂ evolution reaction from an aqueous Na₂SO₃ solution proceeded with 3.7% quantum yield under visible light irradiation (λ > 420 nm) on a Zn_0.957Cu_0.043S solid solution photocatalyst without co‐catalysts such as Pt. This revised version was published online in July 2006 with corrections to the Cover Date.     

Gelation of poly(vinyl alcohol)/phenol/water solutions and gel spinning

The light transmittance of the gels of poly(vinyl alcohol) (PVA)/phenol/water solutions was examined for the entire range of phenol/water content. Excellent transparency was found for the gels with phenol contents of 70–95 vol %. In full consideration of the results for the transparency and melting temperature of the gels and the viscosity and gelation ability of solutions, the PVA solutions of 75 vol % phenol content were selected for the gel spinning. The maximum dynamic moduli of drawn filaments at 25°C (room temperature) were 42 GPa (15x) for atactic PVA and 45 GPa (14x) for syndiotacticity-rich PVA. © 1995 John Wiley & Sons, Inc.     

Preparation of zinc ferrite in the presence of carbon material and its application to hot-gas cleaning

In order to develop an efficient absorbent of H₂S in coal gasification, zinc ferrite (ZnFe₂O₄) was prepared in the presence of carbon materials such as activated carbon (AC), activated carbon fiber (ACF), and Yallourn coal (YL). The absorption behavior of absorbents for H₂S was examined using a fixed-bed flow type reactor equipped with a quadrupole mass spectrometer.Carbon material-supported ZnFe₂O₄ exhibited larger desulfurization capacity for H₂S than unsupported ferrites. They could efficiently remove H₂S from 4000 ppm levels in a simulated coal gasification gas to less than 1 ppm at 500 °C. The absorption capacity of H₂S with ZnFe₂O₄/AC, ZnFe₂O₄/ACF, and ZnFe₂O₄/YL exhibited nearly 100% of stoichiometric amount of loaded metal species. They could be regenerated by an air oxidation in O₂-Ar (50 vol%) at 450 °C for 30 min. The regenerated ferrite can be used for repeated absorption of H₂S with a very slight decrease in the absorption capacity.     

Polymorphic behavior of gondoic acid and phase behavior of its binary mixtures with asclepic acid and oleic acid

Molecular properties of polymorphic forms of gondoic acid [cis-C_20:1Δ11ω9 (GOA)] have been studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC), optical microscopy, and Raman scattering, in comparison to those of six principal unsaturated fatty acids: oleic acid [cis-C_18:1Δ9ω9 (OA)], erucic acid [cis-C_22:1Δ13ω9 (ERA)], petroselinic acid [cis-C_18:1Δ6ω12 (PSA)], asclepic acid [cis-C_18:1Δ11ω7 (APA)], palmitoleic acid [cis-C_16:1Δ9ω7 (POA)], and elaidic acid [trans-C_18:1Δ9ω9 (ELA)]. In addition, phase behavior of binary mixtures of GOA and APA and OA was examined by XRD and DSC. The polymorphic structures of GOA are quite similar to those of APA, ERA, POA, and partly to OA. In particular, DSC and Raman scattering studies have shown that gondoic acid exhibits conformational disordering on heating at the ω-chain, a chain segment between the double bond and CH₃ group, as a transition from all-trans (γ form) to gauche-rich (α form) conformations. A miscible mixing phase was observed in the mixture of GOA and APA, yet eutectic phases were observed in the GOA and OA mixtures. This is a remarkable contrast because the binary mixture systems of varying combinations of cis-unsaturated fatty acids examined so far exhibited either eutectic nature or molecular compound formation. It is expected that specific molecular interactions between GOA and APA that originate from the equivalence of the length of the Δ-chain, the chain segment between the cis-double bond and COOH group, and also from the presence of the γ-α order-disorder transformation would be operating to form the miscible mixing phase.     

Observation of single-walled carbon nanotubes by photoemission microscopy

Single-walled carbon nanotube networks grown on SiO₂ pillars were studied by means of scanning photoemission microscopy. The individual nanotubes or nanotube bundles growing from the pillar tops were observed in C 1s images. Band bending near catalytic Fe/nanotube contacts in an end-bonded configuration was studied by measuring C 1s spectra along the tube axes. Within our experimental resolution, no band bending was observed. This implies that the depletion width is less than the spatial resolution of the scanning photoemission microscope (90 nm) or that the amount of the band bending is less than 0.1 eV.     

Comparative study of lipogenic enzymes in several vertebrates

The liver lipogenic enzymes are compared among rats, chickens, frogs and fish. Although the apparent Km values of glucose-6-phosphate dehydrogenase for glucose-6-phosphate are not much different among all the species, those of malic enzyme for malate are much higher in chickens and fish than in rats and frogs. Glucose-6-phosphate dehydrogenase showed very high activities compared with malic enzyme in fish liver, and malic enzyme showed high activities in chicken liver. Although the apparent Km values of acetyl-CoA carboxylase and fatty acid synthetase for substrates are in the same range among all the animals, the activity of acetyl-CoA carboxylase seems to be extremely low in fish and frog livers, and that of fatty acid synthetase is low in frog livers only. In addition, the apparent Km values of α-glycerophosphate acyltransferase of fish liver are very high, and the enzyme activity appears to be extremely low compared to the others. Therefore, the enzymes at the first steps of both fatty acid and glycerolipid syntheses of poikilothermos animals appear to be very low. On the other hand, the Ouchterlony double-diffusion patterns showed that the lipogenic enzymes of chickens, frogs and fish are immunologically different from those of rats, with the exception of acetyl-CoA carboxylase in chickens. Therefore, it is suggested that the fatty acid and glycerolipid forming systems of poikilothermos animals are quite different from those of homoiothermos and the lipogenesis is very low in poikilothermos.     

Development of flexible organic light‐emitting diode on barrier film and roll‐to‐roll manufacturing

To come out with a successful organic light‐emitting diode (OLED) lighting business, it is very important to have clear differentiation of OLED from LEDs. Flexible OLED has merits, such as capability to be mounted on the curved wall, which is not easy for LEDs to achieve the feature. There are several approaches to make flexible OLEDs especially among those plastic barrier films that can bring high level of flexibility, which could not be achieved by any conventional lighting method. In this paper, barrier films with various water vapor transmission rate values, including 10^{? 6} order, are applied, and the conditions to have almost no dark spot growth under 85 °C and 85% high temperature/humidity test are shown. Flexible OLED panels are manufactured with the world's first roll‐to‐roll equipment using plastic barrier film.     

Fracture toughness of bisphenol A‐type epoxy resin

The relationship between the postcuring conditions and the fracture toughness of a bisphenol A‐type epoxy resin cured with acid anhydride was investigated. The glass transition temperature and fragility parameter, derived from the thermo‐viscoelasticity, were used to characterize the epoxy resin postcured under various conditions. Relationship between these two parameters and the fracture toughness was then investigated, based on the fractography results of a microscopic roughness examination of a fractured surface. The values of the glass transition temperature and fragility greatly depended on the postcuring conditions. The glass transition temperature was approximately 400 K when the crosslinking reaction was saturated. The fragility was independent of the saturation of the reaction and varied between 50 and 180. The results of the fracture test and fractography examination showed that there was no direct correlation between the glass transition temperature, the fracture toughness, and the roughness. On the other hand, there was a correlation between the fragility, fracture toughness, and roughness when the glass transition temperature saturated (at 400 K). As the fragility decreased from 180 to 50, the fracture toughness increased from 0.6 to 1.1 MPa · m^1/2 at the same glass transition temperature. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 10: 2266–2271, 2002