High-speed melt spinning of bicomponent fibers: Mechanism of fiber structure development in poly(ethylene terephthalate)/polypropylene system

High-speed bicomponent spinning of poly(ethylene terephthalate)(PET)(core) and poly-propylene (PP) (sheath) was carried out and the structure development in the individual components, PET and PP, was investigated. The orientation and crystallinity development in the PET component was enhanced as compared to that of the single-component spinning while the PP component remained in a low orientation state and had a pseudohexagonal crystal structure even at high take-up speeds. To clarify the mutual interaction between the two components in bicomponent spinning, a semiquantitative numerical simulation was performed. The simulation results obtained using the Newtonian fluid model showed that the solidification stress in the PET component was enhanced while that of the PP component was decreased in comparison with the corresponding single-component spinning. This is due to the difference in the temperature dependence of their elongational viscosity. Simulation with an upper-convected Maxwell model as the constitutive equation suggested that significant stress relaxation of the PP component can occur in the spinline if the PET component solidifies earlier than does PP. Based on the structural characterization results, and the simulation results, it was concluded that the difference in the activation energy of the elongational viscosity and solidification temperature between the two polymers are the main factors influencing the mutual interaction in the bicomponent spinning process. © 1996 John Wiley & Sons, Inc.     

C57BL/KsJ-db/db-Apc Mice Exhibit an Increased Incidence of Intestinal Neoplasms

The numbers of obese people and diabetic patients are ever increasing. Obesity and diabetes are high-risk conditions for chronic diseases, including certain types of cancer, such as colorectal cancer (CRC). The aim of this study was to develop a novel animal model in order to clarify the pathobiology of CRC development in obese and diabetic patients. We developed an animal model of obesity and colorectal cancer by breeding the C57BL/KsJ-db/db (db/db) mouse, an animal model of obesity and type II diabetes, and the C57BL/6J-Apc(Min/+) (Min/+) mouse, a model of familial adenomatous polyposis. At 15 weeks of age, the N9 backcross generation of C57BL/KsJ-db/db-Apc(Min/+) (db/db-Min/+) mice developed an increased incidence and multiplicity of adenomas in the intestinal tract when compared to the db/m-Min/+ and m/m-Min/+ mice. Blood biochemical profile showed significant increases in insulin (8.3-fold to 11.7-fold), cholesterol (1.2-fold to 1.7-fold), and triglyceride (1.2-fold to 1.3-fold) in the db/db-Min/+ mice, when compared to those of the db/m-Min/+ and m/m-Min/+ mice. Increases (1.4-fold to 2.6-fold) in RNA levels of insulin-like growth factor (IGF)-1, IRF-1R, and IGF-2 were also observed in the db/db- Min/+ mice. These results suggested that the IGFs, as well as hyperlipidemia and hyperinsulinemia, promoted adenoma formation in the db/db-Min/+ mice. Our results thus suggested that the db/db-Min/+ mice should be invaluable for studies on the pathogenesis of CRC in obese and diabetes patients and the therapy and prevention of CRC in these patients.     

Transferred arc plasma processed mullite from coal ash and bauxite

Coal ash disposal is one of the main problems in thermal power plant unit. Currently, a number of waste management systems are being tried for effective disposal of coal ash. In this paper, coal ash from thermal power plant unit was successfully utilized for synthesis of mullite ceramic by using transferred arc plasma processing (TAP) technique. For this purpose, bauxite was added with coal ash by 0, 25, 50 and75 weight ratio. The compositions were thoroughly mixed by ball milling and were melted in the transferred arc plasma torch at 10 kW input power level for 3 min. Argon was used as plasma forming gas. The phase and microstructure formation of the melted samples were investigated by XRD and SEM images. The results show that the additions of bauxite greatly influenced the phase formation of mullite during the processes.     

Preparation of surfactant-free vinyl polymers by conventional emulsion polymerization using hydrolysable emulsifiers

Emulsion polymerizations of several vinyl monomers, styrene, methyl methacrylate, butyl methacrylate, butyl acrylate, and vinyl acetate, in water using alkali–hydrolysable cationic surfactants with a betaine ester group (1-alkoxycarbonylmethyl)trimethylammonium chlorides, as emulsifiers were carried out and properties of the resulting latices and the polymers recovered by hydrolysis and salting out were investigated. There were little influences of the surfactants and monomers used here on the polymerizations, forming stable and monodisperse latices with a mean diameter of ca. 70 nm and giving a high molecular weight of polymers at high yields. All polymers were precipitated and recovered by adding a small amount of sodium hydroxide into the latex solutions contained little amount of ionic species. Solvent-cast films of the polymers were found to have surfaces as hydrophobic as those for the corresponding pure polymers prepared by bulk polymerization.     

Electrochemical properties of N-doped hydrogenated amorphous carbon films fabricated by plasma-enhanced chemical vapor deposition methods

Nitrogen-doped hydrogenated amorphous carbon thin films (a-C:N:H, N-doped DLC) were synthesized with microwave-assisted plasma-enhanced chemical vapor deposition widely used for DLC coating such as the inner surface of PET bottles. The electrochemical properties of N-doped DLC surfaces that can be useful in the application as an electrochemical sensor were investigated. N-doped DLC was easily fabricated using the vapor of nitrogen contained hydrocarbon as carbon and nitrogen source. A N/C ratio of resulting N-doped DLC films was 0.08 and atomic ratio of sp³/sp²-bonded carbons was 25/75. The electrical resistivity and optical gap were 0.695 Ω cm and 0.38 eV, respectively. N-doped DLC thin film was found to be an ideal polarizable electrode material with physical stability and chemical inertness. The film has a wide working potential range over 3 V, low double-layer capacitance, and high resistance to electrochemically induced corrosion in strong acid media, which were the same level as those for boron-doped diamond (BDD). The charge transfer rates for the inorganic redox species, Fe^2+/3+ and Fe(CN)₆^4−/3− at N-doped DLC were sufficiently high. The redox reaction of Ce^2+/3+ with standard potential higher than H₂O/O₂ were observed due to the wider potential window. At N-doped DLC, the change of the kinetics of Fe(CN)₆^3−/4− by surface oxidation is different from that at BDD. The rate of Fe(CN)₆^3−/4− was not varied before and after oxidative treatment on N-doped DLC includes sp² carbons, which indicates high durability of the electrochemical activity against surface oxidation.     

Double layer capacitance of high surface area carbon nanospheres derived from resorcinol–formaldehyde polymers

Micro-mesoporous bimodal carbon nanospheres with high surface areas were synthesized by a combined use of surfactant templating technique and BaO₂ chemical activation one. Starting spherical nanopolymer/surfactant composites were prepared by the NaOH-catalyzed reaction of resorcinol (R) and formaldehyde (F) in the presence of cetyltrimethylammonium bromide (CTAB) as a core template and 1,3,5-trimethylbenzene (TMB) and tert-butanol (t-BuOH) as cosurfactants. After pretreatment with hydrochloric acid, the composite materials were calcined at 1000 °C in N₂ coexistent with varying weight ratios of BaO₂ to RF polymer ranging from 0 to 11. It produced micro-mesoporous bimodal carbon nanospheres of 124–143 nm diameter, with specific surface areas as high as 1884 m² g⁻¹ or up to 3301 m² g⁻¹, in contrast to microporous ones with smaller surface areas obtained at low BaO₂-loadings. The electrochemical double layer capacitance of the resulting nanocarbons in 0.5 M H₂SO₄ showed a marked increase with specific surface areas, up to as high as 219 F g⁻¹ for the highest surface area carbon material.     

Molecular Features and Clinical Management of Hereditary Gynecological Cancers

Hereditary gynecological cancers are caused by several inherited genes. Tumors that arise in the female reproductive system, such as ovaries and the uterus, overlap with hereditary cancers. Several hereditary cancer-related genes are important because they might lead to therapeutic targets. Treatment of hereditary cancers should be updated in line with the advent of various new methods of evaluation. Next-generation sequencing has led to rapid, economical genetic analyses that have prompted a concomitant and significant paradigm shift with respect to hereditary cancers. Molecular tumor profiling is an epochal method for determining therapeutic targets. Clinical treatment strategies are now being designed based on biomarkers based on tumor profiling. Furthermore, the National Comprehensive Cancer Network (NCCN) guidelines significantly changed the genetic testing process in 2020 to initially consider multi-gene panel (MGP) evaluation. Here, we reviewed the molecular features and clinical management of hereditary gynecological malignancies, such as hereditary breast and ovarian cancer (HBOC), and Lynch, Li–Fraumeni, Cowden, and Peutz–Jeghers syndromes. We also reviewed cancer-susceptible genes revealed by MGP tests.     

The dilute solution properties of maleic anhydride and maleic acid copolymers: 1. Light scattering, osmotic pressure and viscosity measurements

Dilute solution behaviour of poly(maleic anhydride-co-ethyl vinyl ether) and poly(maleic acid-co-ethyl vinyl ether) has been investigated by light scattering, osmotic pressure, and viscosity measurements. The molecular weights ($\text{M}\text{?}{}_{\mathrm{w}}$ and $\text{M}\text{?}{}_{\mathrm{n}}$), the second virial coefficients A₂, and the intrinsic viscosities [η] have been determined for three states of this copolymer: anhydride-form, H-form, and Na-salt independently. The constants in the Mark-Houwink relations were obtained for the above three states under different solvent conditions. The molecular weight of the anhydride-form is found to be higher than that of the acid-form or the Na-salt, suggesting the degradation in a process of hydrolysis. The second virial coefficient A₂ as well as the Mark-Houwink relation indicates that the anhydride-form and H-form behave as flexible polymer chains in good solvents. However, the polymer coil of Na-salt is highly expanded even at saturated NaCl concentration.     

具有感觉系统的仿生人造牲畜的研究

介绍一种具有感觉系统、能够四足步行的仿生人造牲畜。该仿生人造牲畜具有12个自由度,关节采用滑块摆杆机械,由伺服电机驱动,其感觉系统由身体上的姿势传感器、脚上的力传感器以及与伺服电机同轴安装的轴角编码器构成。该仿生人造牲畜的步行由计算机进行控制。