Boosting Perovskite Solar Cells Performance and Stability through Doping a Poly‐3(hexylthiophene) Hole Transporting Material with Organic Functionalized Carbon Nanostructures

Perovskite solar cells (PSCs) are demonstrating great potential to compete with second generation photovoltaics. Nevertheless, the key issue hindering PSCs full exploitation relies on their stability. Among the strategies devised to overcome this problem, the use of carbon nanostructures (CNSs) as hole transporting materials (HTMs) has given impressive results in terms of solar cells stability to moisture, air oxygen, and heat. Here, the use of a HTM based on a poly(3‐hexylthiophene) (P3HT) matrix doped with organic functionalized single walled carbon nanotubes (SWCNTs) and reduced graphene oxide in PSCs is proposed to achieve higher power conversion efficiencies (η = 11% and 7.3%, respectively) and prolonged shelf‐life stabilities (480 h) in comparison with a benchmark PSC fabricated with a bare P3HT HTM (η = 4.3% at 480 h). Further endurance test, i.e., up to 3240 h, has shown the failure of all the PSCs based on undoped P3HT, while, on the contrary, a η of ≈8.7% is still detected from devices containing 2 wt% SWCNT‐doped P3HT as HTM. The increase in photovoltaic performances and stabilities of the P3HT‐CNS‐based solar cell, with respect to the standard P3HT‐based one, is attributed to the improved interfacial contacts between the doped HTM and the adjacent layers.     

On elastic traffic via contention resolution diversity slotted aloha satellite access

This paper presents a performance study relative to the coupling of the Transmission Control Protocol (TCP) with the Contention Resolution Diversity slotted aloha (CRDSA) protocol, in the case of greedy TCP connections (also called elephants) on Digital Video Broadcasting‐Return Channel via a geostationary satellite. CRDSA, which takes advantage of interference cancellation algorithms for collision/contention resolution, has already exhibited interesting performance when the power levels of all received bursts are perfectly balanced. In this paper, we extend the study to a more realistic case, where a certain spreading of the bursts' power levels is taken into account. The consequent capture effect even facilitates the collision resolution mechanism and yields an improvement in the overall TCP performance with respect to the balanced case. Furthermore, in certain conditions, the adoption of packet level forward error correction allows achieving even higher peaks of throughput than the expected ones. Copyright © 2014 John Wiley & Sons, Ltd.     

Self-organized Ce(1-x)Gd(x)O(2-y) nanowire networks with very fast coarsening driven by attractive elastic interactions

Assembling arrays of ordered nanowires is a key objective for many of their potential applications. However, a lack of understanding and control of the nanowires' growth mechanisms limits their thorough development. In this work, an appealing new path towards self-organized epitaxial nanowire networks produced by high-throughput solution methods is reported. Two requisites are identified to generate the nanowires: a thermodynamic driving force for an unrestricted elongated equilibrium island shape, and a very fast effective coarsening rate. These requirements are met in anisotropically strained Ce(1-x)Gd(x)O(2-y) nanowires with the (011) orientation grown on the (001) surface of LaAlO(3) substrates. Nanowires with aspect ratios above ≈100 oriented along two mutually orthogonal axes are obtained leading to labyrinthine networks. A very fast effective nanowire growth rate (≈60 nm min(-1)) for ex-situ thermally annealed nanostructures derives from simultaneous kinetic processes occurring in a branched network. Ostwald ripening and anisotropic dynamic coalescence, both promoted by strain-driven attractive nanowire interaction, and rapid recrystallization, enabled by fast atomic diffusion associated with a high concentration of oxygen vacancies, contribute to such an effective growth rate. This bottom-up approach to self-organized nanowire growth has a wide potential for many materials and functionalities.     

Profiling selected phytochemicals and nutrients in different tissues of the multipurpose tree Moringa oleifera L., grown in Ghana

The purpose of this new study was to determine the types and levels of major phytochemicals (non-nutrients) and nutrients in the different tissues from vegetative and flowering Moringa oleifera L. an important multipurpose crop. Rhamnose and acetyl-rhamnose-substituted glucosinolates were found in all of the M. oleifera tissues with different profiles depending on the tissue. In addition the tissues of M. oleifera had a relatively complex flavonoid profile consisting of glucosides, rutinosides, malonylglucosides and traces of acetylglucosides of kaempferol, quercetin and isorhamnetin. Fatty acid profiling of the different tissues showed that leaves were rich in palmitic (16:0) and linolenic (18:3) acid whereas seeds were predominated by oleic acid (18:1). Roots were rich in palmitic and oleic acid, whereas stems and twigs predominately contained palmitic acid. Potassium, magnesium and calcium were the predominant minerals in all of the tissues. Low levels of selenium were detected only in whole seeds.     

Quality assessment of commercial paprikas

Several quality parameters of smoked, oven‐dried and sun‐dried paprikas were studied. Smoked paprikas showed the highest American Spice Trade Association (ASTA) units and pigment concentrations, whereas oven‐dried paprikas showed the best browning index and red/yellow pigment ratio, and sun‐dried paprikas had the highest redness for reflected colour. The colour stability results showed drastic overall colour change (ΔE) and decreased redness and ASTA units of the sun‐dried and oven‐dried paprikas after two and 5 days of UV exposure. Degradation of the smoked paprika colour parameters was progressive, and they showed less degradation even after 30 days. The evaluation of the antioxidant activity showed higher DPPH radical‐scavenging capacity in the smoked samples. The profiles of volatile phenolic compounds of the smoked samples are responsible for the differences in the antioxidant capacity. The great differences in colour stability and antioxidant activity make smoked paprika the best choice for use in the food industry.     

Effect of nanovesicle-encapsulated nisin on growth of Listeria monocytogenes in milk

Commercial nisin was encapsulated in nanovesicles (mean diameter 140 nm) prepared from partially purified soy lecithin. Nisin-loaded liposomes and unencapsulated (free) nisin were initially tested in BHI medium and skim milk inoculated with Listeria monocytogenes and incubated for 48 h at 30 °C. At such abuse temperature conditions, free nisin showed better inhibitory than the liposomal counterparts. Subsequently, the effect of encapsulated or free nisin was evaluated in combination with refrigeration (7 ± 1 °C) in both whole (3.25% fat) and skim (0% fat) milk for up to 14 day. A decrease of 3–4 log cycles in L. monocytogenes counts was observed for free and encapsulated nisin at 0.5 mg/ml concentration. Liposome encapsulation of antimicrobial peptides may be important to overcome stability issues and interaction with food components. The utilization of nanovesicle-encapsulated nisin in combination with low temperatures appeared to be effective to control L. monocytogenes in milk, emphasizing the importance of hurdle technology to assure food safety.     

The effect of co-encapsulation of Lactobacillus rhamnosus GG ATCC 53103 with inulin on alginate/chitosan matrix: the viability in fermented soy blend and simulated digestive system

This research verified the ability of Lactobacillus rhamnosus encapsulated with inulin to tolerate the simulated digestive system and their viability in a soy blend. Probiotic encapsulated in alginate-chitosan matrix without inulin presented a better encapsulation efficiency (80.92%) than encapsulation with inulin (57.39%). On the 28th day, the count of probiotics decreased by 3.42 and 1.99 logarithmic cycles of free and encapsulated cells without inulin, respectively. In contrast, the microorganisms encapsulated with inulin showed an increase of 1.26 logs CFU g⁻¹. During gastrointestinal simulation, cell counts decreased by 0.78, 1.55 and 1.95 CFU g⁻¹ logs for encapsulated cells without inulin, free and encapsulated with inulin, respectively. Sensory panellists liked the fermented soy blend with encapsulated lactobacilli, and this result shows the possibility to create new probiotic foods of plant origin. Therefore, the alginate/chitosan matrix can be considered adequate for the encapsulation of L. rhamnosus. The inulin reduces the encapsulation efficiency and increases the cell loss in gastrointestinal simulation. Considering cellular losses, the best option for preparing a fermented soy blend is to use L. rhamnosus encapsulated without inulin.     

Enzyme activity during germination of different cereals: A review

The germination process increases enzymatic activity. However, this does not occur in the same way in all cereals. It depends on the type of enzyme, the cereal, and the conditions of germination. During germination, most enzymes are localized in the aleurone layer and the scutellum. Some of them, such as xylanases, proteases, and β-glucanases, are also localized in the endosperm while β-glucanases and lipases have been identified in the embryo. The maximum activity of the enzymes in most cereals start from day 4 of germination. Germination allows the hydrolysis of macromolecules and compounds like β-glucans and phytic acid. In cereals, starch is the component that presents the most morphological changes. Germination mobilizes and increases the activity of some enzymes. Temperature, steeping time, and variety are determining factors in the activation time. At higher temperatures, the enzymatic activation is generally faster; however, there are some exceptions. The use of germination could be a promising resource for modifying grain properties and increase enzymatic activity; also, this process is simple and economical.