Vacuum Carbothermic Reduction of Alumina

The current industrial production of aluminum from alumina is based on the electrochemical Hall-Héroult process, which has the drawbacks of high-greenhouse gas emissions, reaching up to 0.70 kg CO_2-equiv/kg Al, and large energy consumption, about 0.055 GJ/kg Al. An alternative process is the carbothermic reduction of alumina. Thermodynamic equilibrium calculations and experiments by induction furnace heating indicated that this reaction could be achieved under atmospheric pressure only above 2200°C. Lower required reaction temperatures can be achieved by alumina reduction under vacuum. This was experimentally demonstrated under simulated concentrated solar illumination and by induction furnace heating. By decreasing the CO partial pressure from 3.5 mbar to 0.2 mbar, the temperature required for almost complete reactant consumption could be decreased from 1800°C to 1550°C. Deposits condensed on the relatively cold reactor walls contained up to 71 wt% of Al. Almost pure aluminum was observed as Al drops, while a gray powder contained 60–80% Al and a yellow-orange powder contained only Al₄C₃, Al-oxycarbides and Al₂O₃.     

Personalization of cardiac motion and contractility from images using variational data assimilation

Personalization is a key aspect of biophysical models in order to impact clinical practice. In this paper, we propose a personalization method of electromechanical models of the heart from cine-MR images based on the adjoint method. After estimation of electrophysiological parameters, the cardiac motion is estimated based on a proactive electromechanical model. Then cardiac contractilities on two or three regions are estimated by minimizing the discrepancy between measured and simulation motion. Evaluation of the method on three patients with infarcted or dilated myocardium is provided.     

Non-toxic, zero emission tannin-glyoxal adhesives for wood panels

In this study different tannin-glyoxal glue mixes for particleboard were studied. Gel times at 100 °C of 45% water solutions of commercial pine tannin extract (Pinus radiata ex Diteco Ltda, Chile) with respectively 8% paraformaldehyde and 9% glyoxal were done at different pHs. Duplicate one layer laboratory particleboards were prepared by adding 12% total resin solids of adhesives composed of commercial pine tannin extract (Pinus radiata ex Diteco Ltda, Chile) with paraformaldehyde, or glyoxal or polymeric 4,4’ diphenylmethanne diisocianate (pMDI), respectively. It was found that tannin-glyoxal panels which do not contain formaldehyde and with an emission equal to that of unbounded wood can be obtained by the use of glyoxal as hardener.     

Exploring New Potential Anticancer Activities of the G-Quadruplexes Formed by [(GTG2T(G3T)3] and Its Derivatives with an Abasic Site Replacing Single Thymidine

In this paper, we report our investigations on five {"type":"entrez-nucleotide","attrs":{"text":"T30175","term_id":"612273"}}T30175 analogues, prepared by replacing sequence thymidines with abasic sites (S) one at a time, in comparison to their natural counterpart in order to evaluate their antiproliferative potential and the involvement of the residues not belonging to the central core of stacked guanosines in biological activity. The collected NMR (Nuclear Magnetic Resonance), CD (Circular Dichroism), and PAGE (Polyacrylamide Gel Electrophoresis) data strongly suggest that all of them adopt G-quadruplex (G4) structures strictly similar to that of the parent aptamer with the ability to fold into a dimeric structure composed of two identical G-quadruplexes, each characterized by parallel strands, three all-anti-G-tetrads and four one-thymidine loops (one bulge and three propeller loops). Furthermore, their antiproliferative (MTT assay) and anti-motility (wound healing assay) properties against lung and colorectal cancer cells were tested. Although all of the oligodeoxynucleotides (ODNs) investigated here exhibited anti-proliferative activity, the unmodified {"type":"entrez-nucleotide","attrs":{"text":"T30175","term_id":"612273"}}T30175 aptamer showed the greatest effect on cell growth, suggesting that both its characteristic folding in dimeric form and its presence in the sequence of all thymidines are crucial elements for antiproliferative activity. This straightforward approach is suitable for understanding the critical requirements of the G-quadruplex structures that affect antiproliferative potential and suggests its application as a starting point to facilitate the reasonable development of G-quadruplexes with improved anticancer properties.     

The effect of substrate on mycotoxin production of selected Penicillium strains

Analytical methods are presented for detecting simultaneously 11 fungal metabolites (aflatoxins B1, B2, G1 and G2, citrinin, cyclopiazonic acid, mycophenolic acid, ochratoxin A, penicillic acid, penitrem A and roquefortine C) on different matrices. The methods were applied to determine the mycotoxins produced by different Penicillium crustosum, Penicillium nordicum and Penicillium verrucosum strains on yeast extract sucrose (YES) agar and cheese and bread analogues and are based on high-performance liquid chromatography (HPLC) and photodiode array detection (PDA). The growth substrate had a distinctive effect on the mycotoxin production ability of the fungi examined. The P. crustosum strains produced roquefortine C on all the substrates, with the highest amounts being detected on the cheese analogue. Penitrem A was synthesised on the cheese analogue only. The strains of P. verrucosum produced exclusively citrinin on YES, but both ochratoxin A and citrinin were detected in considerable amounts on the bread analogue. On the bread, toxin profiles varied significantly between the individual P. verrucosum strains. The cheese analogue was not favourable for the mycotoxin production of this species. The growth substrate had the least effect on the toxin production of the P. nordicum strains, which synthesised ochratoxin A in moderate amounts on all three media.     

Co-metabolism of citrate and maltose byLactobacillus brevis subsp.lindneri CB1 citrate-negative strain: effect on growth, end-products and sourdough fermentation

Growth, substrates and end-product formation of the maltose and citrate co-metabolization byLactobacillus brevis subsp.lindneri CB1 citrate-negative strain were initially studied in synthetic medium. Compared to maltose (19 g/l) fermentation, the co-metabolization of maltose (10 g/l) plus citrate (9 g/l) caused faster cell growth, increased the concentrations of lactic acid and especially of acetic acid (from 0.7 g/l to 2.9 g/l), produced succinic acid (0.5 g/l) and reduced ethanol synthesis. Highest activities of acetate kinase, the same of lactate dehydrogenase and a reduced alcohol dehydrogenase activity were detected in cytoplasmic extracts of cells growing on maltose plus citrate. The breakdown of citrate depended upon the continuous presence of maltose in the growth medium. Upon depletion of citrate, the cells continued through the normal maltose fermentation, having a diauxic metabolic curve as shown by impedance measurements. Concentrations of citrate from 3 g/l to 15 g/l led to increases of acetic acid from 1.25 g/l to 5.55 g/l. Since maltose was naturally present during sourdough fermentation, the addition of 9 g citrate per kg wheat dough enabled the co-metabolization of maltose and citrate byL. brevis subsp.lindneri CB1. Compared with traditional sourdough fermentation, faster cell growth, a higher acetic acid concentration and a reduced quotient of fermentation were obtained by co-metabolism.     

Disruption and functional analysis of six ORFs of chromosome IV: YDL103c (QRI1), YDL105w (QRI2), YDL112w (TRM3), YDL113c, YDL116w (NUP84) and YDL167c (NRP1)

We have disrupted six ORFs (YDL103c, YDL105w, YDL112w, YDL113c, YDL116w and YDL167c) located on the left arm of chromosome IV. Except for YDL112w, the short flanking homology strategy was used to construct disruption cassettes using the KanMX4 marker. For YDL112w, a disruption cassette including the LEU2 gene was made. YDL103c and YDL105w are essential genes for vegetative growth. Disruption of YDL112w, YDL113c and YDL167c does not result in any detectable phenotype with the tests we used, while disruption of YDL116w confers slow growth, cryosensitivity and thermosensitivity, and the disrupted diploid homozygotes for the disruption failed to sporulate.     

Biodegradable polyurethane composite scaffolds containing Bioglass® for bone tissue engineering

Five types of solid and porous polyurethane composites containing 5–20 wt.% of Bioglass® inclusions were synthesized. Porous structures were fabricated by polymer coagulation combined with the salt-particle leaching method. In-vitro bioactivity tests in simulated body fluid (SBF) were carried out and the marker of bioactivity, e.g. formation of surface hydroxyapatite or calcium phosphate layers upon immersion in SBF, was investigated. The chemical and physical properties of the solid and porous composites before and after immersion in SBF were evaluated using different techniques: Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA) and Thermogravimetric Analysis (TGA). Moreover the surface structure and microstructure of the composites was characterised by Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM), respectively. Mercury intrusion porosimetry, SEM and microtomography (μCT) were used to determine pore size distribution and porosity. The fabricated foams exhibited porosity >70% with open pores of 100–400 μm in size and pore walls containing numerous micropores of <10 μm. This pore structure satisfies the requirements for bone tissue engineering applications. The effects of Bioglass® addition on microstructure, mechanical properties and bioactivity of polyurethane scaffolds were evaluated. It was found that composite foams showed a higher storage modulus than neat polyurethane foams. The high bioactivity of composite scaffolds was confirmed by the rapid formation of hydroxyapatite on the foam surfaces upon immersion in SBF.