Ultraviolet curable epoxy acrylic resins — network flexibilization in the presence of reactive diluents

Different reactive diluents suitable for inducing network flexibilization of a typical ultraviolet curable epoxy resin based on bisphenol-A-diglycidyl-ether-diacrylate (BGEDA) were investigated. Firstly the influence of some monoacrylic reactive diluents, e.g. 2-ethylhexyl-acrylate (EHA) and 4-hydrocybutil-acrylate (HBA) and of a bis-acrylic diluent, polyethylene-glycol-diacrylate (PEGDA) was examined. Subsequently a systematic study was carried out on the properties of coatings resulting from mixtures of BGEDA and a poly(diethylene-glycol-carbonate) diacrylate (PGCDA) as reactive diluent. The main mechanical, dynamic-mechanical and technological properties of both free films and films coated on steel sheets, were evaluated. Interesting network flexibilization properties were observed when PGCDA was used as reactive diluent of BGEDA. The formulations investigated allowed us to obtain a broad range of flexibility for the resulting ultraviolet cured resins and to correlate the coating flexibility with other fundamental properties such asT _g, elastic modulus, abrasion resistance, hardness, adhesion, impact resistance, accelerated ageing and resistance to chemicals.     

Structural characterization,thermal properties,and density functional theory studies of PMMA‐maghemite hybrid material

Maghemite (γ‐Fe₂O₃)‐poly(methyl methacrylate) (PMMA) nanocomposites were prepared by grafting 3‐(trimethoxy‐silyl) propyl methacrylate on the surface of maghemite nanoparticles, this process being followed by methyl methacrylate radical polymerization. Three different hybrids with 0.1, 0.5, and 2.5 wt% of maghemite nanoparticles were studied. The results indicate that these nanocomposites consist of a homogeneous PMMA matrix in which maghemite nanoparticles with a bimodal size distribution are embedded. The existence of covalent bonding between silane monomers and atoms on the maghemite surface was evidenced. AFM images showed a clear increase in surface roughness for increasing maghemite content. The thermal stability of PMMA‐maghemite nanocomposites is higher than that of pure PMMA and increases for increasing maghemite content. The results of our theoretical studies indicate that the electron density in the maghemite nanoparticle is not homogenous, the low electron density volumes being supposed to be radical trappers during PMMA decomposition, thus acting as a thermal stabilizer. POLYM. COMPOS., 51–60, 2016. © 2014 Society of Plastics Engineers     

Progress on Electrospun Composite Fibers Incorporating Bioactive Glass: An Overview

Electrospinning is a promising approach for the development of fibrous tissue engineering (TE) scaffolds suitable for hard and soft tissues. Apart from physicomechanical properties, electrospun fibers are required to incorporate bioactive cues to control cellular functions, including facilitating biomineralization and osteogenic differentiation in case of bone TE, as well as vascularization, to support successful tissue regeneration. In recent years, bioactive glass (BG) addition to electrospun biopolymer fibers has shown promising results in enhancing the properties of fibers, including the improvement of biological performance. In this article, a comprehensive overview of BG-containing electrospun polymer composite fibers is presented, identifying the parameters that affect the mechanical properties as well as the biological response in vivo and in vitro. Subsequently, the effects of BG addition on the properties of the scaffolds are discussed. Recent developments in the fields of bone regeneration, wound healing, and drug delivery using BG-containing electrospun fibrous scaffolds are described in detail. Essential aspects related to BG-polymer composite fibers for translational research in TE are highlighted for future research in this field.     

Angiogenic potential of boron-containing bioactive glasses: in vitro study

Boron-containing bioactive glasses (BGs) are being extensively researched for the treatment and regeneration of bone defects because of their osteostimulatory and neovascularization potential. In this study, we report the effects of the ionic dissolution products (IDPs) of different boron-doped, borosilicate, and borate BG scaffolds on mouse bone marrow stromal cells in vitro, using an angiogenesis assay. Five different BG scaffolds of the system SiO₂–Na₂O–K₂O–MgO–CaO–P₂O₅–B₂O₃ (with varying amounts of SiO₂ and B₂O₃) were fabricated by the foam replication technique. Bone marrow stromal cells were cultivated in contact with the IDPs of the boron-containing BG scaffolds at different concentrations for 48 h. The expression and secretion of vascular endothelial growth factor (VEGF) from the cultured cells was measured quantitatively using the VEGF ELISA Kit. Cell viability and cell morphology were determined using WST-8 assay and H&E staining, respectively. The cellular response was found to be dependent on boron content and the B release profile from the glasses corresponded to the positive or negative biological activity of the BGs.     

Aerosol lidar intercomparison in the framework of the EARLINET project. 3. Raman lidar algorithm for aerosol extinction, backscatter, and lidar ratio

An intercomparison of the algorithms used to retrieve aerosol extinction and backscatter starting from Raman lidar signals has been performed by 11 groups of lidar scientists involved in the European Aerosol Research Lidar Network (EARLINET). This intercomparison is part of an extended quality assurance program performed on aerosol lidars in the EARLINET. Lidar instruments and aerosol backscatter algorithms were tested separately. The Raman lidar algorithms were tested by use of synthetic lidar data, simulated at 355, 532, 386, and 607 nm, with realistic experimental and atmospheric conditions taken into account. The intercomparison demonstrates that the data-handling procedures used by all the lidar groups provide satisfactory results. Extinction profiles show mean deviations from the correct solution within 10% in the planetary boundary layer (PBL), and backscatter profiles, retrieved by use of algorithms based on the combined Raman elastic-backscatter lidar technique, show mean deviations from solutions within 20% up to 2 km. The intercomparison was also carried out for the lidar ratio and produced profiles that show a mean deviation from the solution within 20% in the PBL. The mean value of this parameter was also calculated within a lofted aerosol layer at higher altitudes that is representative of typical layers related to special events such as Saharan dust outbreaks, forest fires, and volcanic eruptions. Here deviations were within 15%.     

Personalization of cardiac motion and contractility from images using variational data assimilation

Personalization is a key aspect of biophysical models in order to impact clinical practice. In this paper, we propose a personalization method of electromechanical models of the heart from cine-MR images based on the adjoint method. After estimation of electrophysiological parameters, the cardiac motion is estimated based on a proactive electromechanical model. Then cardiac contractilities on two or three regions are estimated by minimizing the discrepancy between measured and simulation motion. Evaluation of the method on three patients with infarcted or dilated myocardium is provided.     

Dynamics and control of solar thermochemical reactors

A general dynamic model for solar-driven thermochemical processes is formulated based on unsteady mass and energy conservation equations coupled to the reaction kinetics. It is applied to two pertinent high-temperature thermochemical reactors for fuel production that make use of concentrated solar energy as the source of process heat, namely: an indirectly irradiated batch-operated packed bed reactor for the carbothermic reduction of zinc oxide, and a directly irradiated continuously operated particle flow reactor for the steam-gasification of petcoke. Model parameter identification and validation is accomplished by comparing numerically simulated and experimentally measured temperatures and outlet product concentrations. A linear feedback controller was implemented using the LQG/LTR design method. Simulations of the controlled reactor system with real solar irradiation data indicates improved quality and steadiness of product composition throughout transient solar input phases and superior solar-to-chemical energy conversion efficiency.     

Mycotoxins produced by Fusarium genus in maize: determination by screening and confirmatory methods based on liquid chromatography tandem mass spectrometry

A confirmatory method for fusariotoxin analysis in maize meal, based on liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS), was developed, and compared with a previously published screening method, based on the same technique. By eluting selectively from a Carbograph-4 clean-up cartridge trichothecenes, fumonisins and macrocyclic lactones, and optimizing LC–MS/MS conditions for every chemical class, a sensitive and reliable determination was performed. Method quantification limits for confirmatory and screening methods were in the range 0.001–0.019 mg/kg and 0.003–0.125 mg/kg, respectively.