An integrated modeling approach to predict flooding on urban basin.

Correct prediction of flood extents in urban catchments has become a challenging issue. The traditional urban drainage models that consider only the sewerage-network are able to simulate the drainage system correctly until there is no overflow from the network inlet or manhole. When such overflows exist due to insufficient drainage capacity of downstream pipes or channels, it becomes difficult to reproduce the actual flood extents using these traditional one-phase simulation techniques. On the other hand, the traditional 2D models that simulate the surface flooding resulting from rainfall and/or levee break do not consider the sewerage network. As a result, the correct flooding situation is rarely addressed from those available traditional 1D and 2D models. This paper presents an integrated model that simultaneously simulates the sewerage network, river network and 2D mesh network to get correct flood extents. The model has been successfully applied into the Tenpaku basin (Nagoya, Japan), which experienced severe flooding with a maximum flood depth more than 1.5 m on September 11, 2000 when heavy rainfall, 580 mm in 28 hrs (return period > 100 yr), occurred over the catchments. Close agreements between the simulated flood depths and observed data ensure that the present integrated modeling approach is able to reproduce the urban flooding situation accurately, which rarely can be obtained through the traditional 1D and 2D modeling approaches.     

A genetic‐based neuro‐fuzzy controller for blind equalization of time‐varying channels

This paper presents a neuro‐fuzzy network (NFN) where all its parameters can be tuned simultaneously using genetic algorithms (GAs). The approach combines the merits of fuzzy logic theory, neural networks and GAs. The proposed NFN does not require a priori knowledge about the system and eliminates the need for complicated design steps such as manual tuning of input–output membership functions, and selection of fuzzy rule base. Although, only conventional GAs have been used, convergence results are very encouraging. A well‐known numerical example derived from literature is used to evaluate and compare the performance of the network with other equalizing approaches. Simulation results show that the proposed neuro‐fuzzy controller, all parameters of which have been tuned simultaneously using GAs, offers advantages over existing equalizers and has improved performance. From the perspective of application and implementation, this paper is very interesting as it provides a new method for performing blind equalization. The main contribution of this paper is the use of learning algorithms to train a feed‐forward neural network for M‐ary QAM and PSK signals. This paper also provides a platform for researchers of the area for further development. Copyright © 2008 John Wiley & Sons, Ltd.     

Visual insights into high-resolution earthquake Simulations.

This study focuses on the visualization of a series of large earthquake simulations collectively called TeraShake. The simulation series aims to assess the impact of San Andreas Fault earthquake scenarios in Southern California. We discuss the role of visualization in gaining scientific insight and aiding unexpected discoveries.     

The sliding-window packet switch: a new class of packet switch architecture with plural memory modules and decentralized control

Shared-memory based packet switches are known to provide the best possible throughput performance for bursty data traffic in high-speed packet networks and internets compared with other buffering strategies under conditions of identical memory resources deployed in the switch. However, scaling of shared-memory packet switches to a larger size has been restricted mainly due to the physical limitations imposed by the memory-access speed and the centralized control for switching functions in shared-memory switches. A new scalable architecture for a shared-memory packet switch, called the sliding-window (SW) switch, is proposed to overcome these limitations. The SW switch introduces a new class of switching architecture, where physically separate multiple memory modules are logically shared among all the ports of the switch, and the control is decentralized. The SW switch alleviates the bottleneck caused by the centralized control of switching functions in large shared-memory switches. Decentralized switching functions enable the SW switch to operate in a pipeline fashion to enhance scalability and switching capacity compared with that of previously known classes of shared-memory switch architecture.     

Synthesis and properties of star-like wholly aromatic polyester fibers

Novel star-like wholly aromatic copolyesters having four arms based on a tetraamine star core, p- and m- hydroxybenzoic acids and 6-hydroxy-2-naphthoic acid have been successfully synthesized and spun into fibers for the investigation of the effect of the star-like structure on improving compressive properties of the fiber. The reactivity of the star core was demonstrated using a model compound with FTIR, ¹H and ¹³C NMR spectroscopy. The ¹³C NMR spectrum of the star-like terpolymer having a molar ratio of 10:1 of the monomers to star core showed a characteristic peak at around δ62 ppm which corresponds to a tetra-substituted carbon and thereby demonstrates that the star core was really incorporated into the polymer. The star-like copolyester exhibited a clear stir opalescence and liquid crystalline morphology in the temperature range of 150-280 °C. However, no transition was observed in the DSC thermogram except a clear T_g at 110 °C. The star-like terpolymer fiber, prepared from a polymer with a molar ratio of 500:1 for the monomers to imide core, was spun in the liquid crystalline state at 180 °C. Fiber structure and properties have been studied.     

Theoretical investigation of penetration characteristics in gas metal-arc welding using finite element method

In the modeling of the gas metal-arc (GMA) welding process, heat inputs to the workpiece by the arc and the metal transfers have been considered separately. The heat energy delivered due to the metal transfer has been approximated in the form of a cylindrical volumetric heat source, whose dimensions of the radius and the height are dependent on the molten metal droplet characteristics. The pinch instability theory (PIT) and the static force balance theory (SFBT) of drop detachment have independently been used to obtain the expressions for various characteristics of the drop,i.e., the drop radius, the drop velocity, and the drop frequency at various welding parameters. The occurrence or the nonoccurrence of finger penetration, routinely found in the GMA welding at high welding currents, has been satisfactorily explained by the cylindrical heat source model. The effect of various welding parameters,e.g., the welding current, the wire radiusetc., on the weld bead penetration characteristics has been investigated. In this modeling effort, the heat conduction equation has been solved in three dimensions.     

Off-line quality control for V-process castings

In the present work Taguchi's approach has been applied to the V-process castings of Al-11 per cent Si alloy to acertain the most influential control factors which will provide better and consistent surface finish to the castings regardless of the noise factors present. The control factors of the V-process that may affect the quality of the castings are the molding sand, vibration frequency, vibrating time, degree of vacuum imposed, and pouring temperature. In order to understand how these factors affect the surface roughness of the V-process castings, response surface methodology has been applied, and to obtain the optimal setting of the control factors Taguchi's method has been used. It is found that the pouring temperature has a significant effect on the surface roughness of Al-11 per cent Si alloy castings made by a V-process. Thus the pouring temperature must be kept at the lower level. All other factors are insignificant. Therefore, any setting of the insignificant factors/variables that give the minimum cost can be used.