Corrosion of Mg alloys EV31A,WE43B,and ZE41A in chloride- and sulfate-containing solutions saturated with magnesium hydroxide

This study studied corrosion in 0.1 M Na₂SO₄, 0.1 M NaCl, and 0.6 M NaCl, all saturated with Mg(OH)₂, using weight loss, hydrogen evolution, and electrochemical measurements. Corrosion was similar in all cases. Nevertheless, the corrosion rates were alloy-dependent, were somewhat lower in 0.1 M Na₂SO₄ than in 0.1 M NaCl, and increased with NaCl concentration. The corrosion damage morphology was similar for all solutions; the extent correlated with the corrosion rate. The corrosion rates evaluated by the electrochemical methods were lower than those evaluated from hydrogen evolution, consistent with the Mg corrosion mechanism involving the unipositive Mg⁺ ion.     

Nonoxidative methane activation,coupling, and conversion to ethane,ethylene, and hydrogen over Fe/HZSM‐5, Mo/HZSM‐5, and Fe–Mo/HZSM‐5 catalysts in packed bed reactor

A high abundance of methane and its relatively low price make it an attractive raw feedstock for the production of ethylene, which is in the consumer demand in recent years. Direct catalytic nonoxidative conversion is interesting, because it could be utilized on natural gas well sites. Monometallic and bimetallic Fe and Mo catalysts were prepared for the purpose of the coupling to ethane and ethene. Three supported materials were synthesized with the following loading of metal: 2.5‐wt% Fe, 5.0‐wt% Fe, and 2.5‐wt% Mo on HZSM‐5. Process' chemical reactions were also catalyzed with a constant 2.5‐wt% Mo/HZSM‐5, which had different amounts of Fe, namely, 0.5, 1.0, and 2.5 wt%. Fourier transform infrared (FTIR), N₂ adsorption/desorption, NH₃ temperature‐programmed desorption (TPD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray diffraction (XRD) were applied for characterization. Coke, accumulated on spent solids, was determined by thermogravimetric analysis (TGA). Activity was evaluated in quartz‐packed bed reactor. All surfaces suffered from deactivation due to carbon formation. The addition of Fe to Mo increased CH₄ reacted. The highest selectivity for alkenes was achieved over 1.0‐wt% Fe to 2.5‐wt% Mo/HZSM‐5. At the peak of performance, the C‐based reactivity was 52% for olefins and 2% for alkanes. Stability was accomplished over 2.5‐wt% Fe/HZSM‐5, where the rate of C₂ synthesis was comparatively stable for 20 hours of the time on stream. The selective C‐basis yield for C₂H₄ and C₂H₆ was 36% and 23%, respectively. The lowest measured quantity of (carbonaceous) by‐products was deposited on 2.5‐wt% Fe/HZSM‐5 after 26 hours. Propylene was detected very limitedly.     

Gas Responsive Nanoswitch: Copper Oxide Composite for Highly Selective H2S Detection

A nanocomposite material based on copper(II) oxide (CuO) and its utilization as a highly selective and stable gas‐responsive electrical switch for hydrogen sulphide (H₂S) detection is presented. The material can be applied as a sensitive layer for H₂S monitoring, e.g., in biogas gas plants. CuO nanoparticles are embedded in a rigid, nanoporous silica (SiO₂) matrix to form an electrical percolating network of low conducting CuO and, upon exposure to H₂S, highly conducting copper(II) sulphide (CuS) particles. By steric hindrance due to the silica pore walls, the structure of the network is maintained even though the reversible reaction of CuO to CuS is accompanied by significant volume expansion. The conducting state of the percolating network can be controlled by a variety of parameters, such as temperature, electrode layout, and network topology of the porous silica matrix. The latter means that this new type of sensing material has a structure‐encoded detection limit for H₂S, which offers new application opportunities. The fabrication process of the mesoporous CuO@SiO₂ composite as well as the sensor design and characteristics are described in detail. In addition, theoretical modeling of the percolation effect by Monte‐Carlo simulations yields deeper insight into the underlying percolation mechanism and the observed response characteristics.     

Structural Analysis,Electrochemical Behavior,and Biocompatibility of Novel Quaternary Titanium Alloy with near β Structure

This article analyses the microstructure, electrochemical behavior, and biocompatibility of a novel Ti-20Nb-10Zr-5Ta alloy with low Young’s modulus (59 GPa) much closer to that of bone, between 10 and 30 GPa, than Ti and other Ti alloys used as implant biomaterial. XRD and SEM measurements revealed a near β crystalline microstructure containing β phase matrix and secondary α phase, with a typical grain size of around 200 μm. The corrosion behavior in neutral Ringer solution evidenced: self-passivation behavior characterizing a very resistant passive film; an easy passivation as a result of favorable influence of the alloying elements Nb, Zr, and Ta that participate with their passive oxides to the formation of the alloy passive film; low corrosion and ion release rates corresponding with very low toxicity. In MEM solution, the novel alloy demonstrated very high corrosion resistance and no susceptibility to localized corrosion. Biocompatibility was evaluated on in vitro human osteoblast-like and human immortalized pulmonary fibroblast cell (Wi-38) lines and the new Ti-20Nb-10Zr-5Ta alloy exhibited no cytotoxicity. The new Ti-20Nb-10Zr5Ta alloy is a promising material for implants due to combined properties of low elastic modulus, very low corrosion rate, and good biocompatibility.     

Die massenspektrometrische Fragmentierung von Neopentylpolyolestern III Neopentylglycoldifettsäureester

Mass Spectrometric Fragmentation of Neopentylpolyolesters, Part III: Fatty Acid Diesters of Neopentylglycole The fragmentation of the homologous fatty acid diesters of neopentylglycole (C₂ to C₁₈) upon electron impact was investigated. Main fragments arise by M-RCOO and M-RCOOH. Cyclic acetal structures for these ions are postulated. Subsequent fragmentation was elucidated by DADI-measurements and high resolution measurements. The influence of the length of the fatty acid chain upon the fragmentation is discussed. Esters of branched fatty acids can be distinguished from esters of n-fatty acids by characteristic ions.     

Linkages between manufacturing strategy, benchmarking, performance measurement and business process reengineering

An empirical analysis is presented for researching linkages between manufacturing strategy, benchmarking, performance measurement (PM) and business process reengineering (BPR). Although the importance of these linkages has been described in conceptual literature, it has not been widely demonstrated empirically. The survey research was carried out in 73 medium and large-sized Slovenian manufacturing companies within the mechanical, electro-mechanical and electronic industries. The resulting data were subjected to reliability and validity analyses. Canonical correlation analysis was used to test six hypotheses.The results confirmed the need for a strategically-driven BPR approach and the positive impact of performance measurement on BPR performance.     

Student progress assessment with the help of an intelligent pupil analysis system

Students and lecturers would like to know how well students have learned the study materials being taught. A formal test or exam would cause needless stress for students. To resolve this problem, the authors of this article have developed an Intelligent Pupil Analysis (IPA) System. A sufficient amount of studies worldwide prove an interrelation between pupil size and a person's cognitive load. The obtained research results are comparable with the results from other similar studies. The original contribution of this article, compared to the research results published earlier, is as follows: the IPA System developed by the authors is superior to the traditional pupil analysis research due to the integration of pupil analysis with subsystems of decision support, recommender and intelligent tutoring systems and innovative Models of the Model-base, which permit a more detailed analysis of the knowledge attained by a student. This article ends with a case study to demonstrate the practical operation of the IPA System.     

Friction Sensitivity of Nitramines. Part Ⅱ: Comparison with Thermal Reactivity（英）

The friction sensitivity (FS) of five linear and eight cyclic nitramines has been determined.Arrhenius parameters of non-autocatalyzed thermal decomposition of these nitramines were used for comparison...