Six-layer lamination of a new dry film negative-tone photoresist for fabricating complex 3D microfluidic devices

We present a new epoxy-based negative-tone dry film photoresist (DFR) for fabricating multilayer microfluidic devices using a lamination process combined with a standard photolithography technology. As proof-of-concept, a complex 3D-hydrodynamic focusing device was produced via a six-layer lamination process of 33 µm-thick DFR layers. The bonding strength of the new DFR was tested on silicon, glass, and titanium substrates, respectively. A maximum bonding strength of 37 MPa was obtained for the dry film photoresist laminated on glass. No leakage was found, and burst tests proved excellent robustness and sealing reliability of the microchannels.     

Viscoelastic solid relations for the deformation of ice

A frame indifferent differential operator law relating stress, stress-rate, strain, and strain-rate is constructed to describe the qualitative features of both constant load and constant displacement rate response in uni-axial stress experiments. No lower order differential relation can describe both responses, but the two responses are not sufficient to determine the response coefficients of the relation. The jump relation is determined for a stress discontinuity applied in a general configuration. A simple initially isotropic model is proposed to investigate the effects of loading history and the anisotropy induced in a configuration following a loading-unloading cycle. Both uni-axial stress and shear cycles are treated, followed by uni-axial stress loading in different directions. The respective deformation histories are determined in the small strain approximation, and demonstrate a significant influence of the initial load cycle on response from the unloaded configuration.     

Influences of gender and weight gain on short-term relapse to smoking in a cessation trial.

Few researchers have studied whether weight gain has an impact on short-term relapse to smoking. The authors of this study investigated predictors of relapse among 989 participants (60% women) in a randomized, double-blind, 10-week multicenter trial to determine the effect of fluoxetine (30 or 60 mg) versus placebo in combination with behavioral counseling for smoking cessation. Medication compliance and smoking status were biochemically verified. At Visit 2, participants were asked to set a quit date within the subsequent 2 visits. A proportional hazards regression model was used to predict risk of relapse within the first 3 months of quitting. Weight gain predicted relapse, but for men only. Female gender also predicted relapse. The results led the authors to question whether postcessation weight gain interventions should be restricted to women smokers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fe-Zeolite as on-Site Regenerable Adsorber for Chlorohydrocarbons in Groundwater – from Laboratory to Pilot Test

This study describes the design and upscaling of an on-site regenerable adsorbent fixed bed of Fe-loaded MFI zeolite for removal of chlorinated hydrocarbons (CHCs) from contaminated groundwater from laboratory studies to pilot scale. The zeolite has an excellent adsorption performance for the hydrophilic CHCs and can be regenerated on-site by flushing with H₂O₂ to degrade adsorbed contaminants by a catalytic Fenton-like reaction. In the pilot test, the Fe-zeolite (30 kg) maintained its performance over treatment of 1470 m³ of groundwater in 12 adsorption/regeneration cycles.     

An approach to an objective background subtraction for elemental mapping with core-edges down to 50 eV: description, evaluation and application

To image the distribution of a specific element in a specimen with an energy filtering TEM, the element-unspecific background under the core-edge has to be subtracted. The most commonly used procedure is the three-window power-law method leading to considerable systematic errors for low-energy core-edges. Here a new method is described which can be considered as a generalized difference method. Characteristic examples for element detection in biological specimens using this method are shown. The background under the core-edge can be described by one or two pre-edge windows as a polynome of third order. This function can be deduced from specimen areas that are not known to contain the element or from a second specimen used as a standard. Control experiments showed that background subtraction for on-overlapping core-edges in the low-loss region (50-200 eV) needs two pre-edge images, whereas at higher-energy losses (> 300 eV) only one pre-edge image is necessary. With the method described, objective elemental mapping becomes possible even for edges at 50-100 eV. This was proven for the M2,3-edge of iron at 60 eV. The detection of phosphorous was possible with a signal-to-noise ratio five times higher than when using the three-window method. Preliminary data showed that it should be possible to detect calcium with only one image before the edge.     

Computer-based determination of size and shape in living cells

Measurement of cell volume in living epithelial cells has become an important technique in studies of membrane transport processes that function in cell volume regulation. Planimetry of video images of optical sections enables the measurement of the cross sectional area of each section. Cell volume is calculated from the measured area of each section and the known focus displacements. In the past the measurement of cross section area has been done by manual positioning of a cursor superimposed on the video image. Each experiment generates approximately 200 images in which two or more cells may be analysed. We have developed a computer-based method that uses one image as a template, and allows automated area determination of successive images by template matching and digital image processing. This new method is comparable to the older method in speed and accuracy, but requires much less effort from the experimenter.     

Diffusion coefficients in the lateral intercellular spaces of Madin-Darby canine kidney cell epithelium determined with caged compounds

The diffusion coefficients of two caged fluorescent dyes were measured in free solution and in the lateral intercellular spaces (LIS) of cultured Madin-Darby canine kidney (MDCK) cells after photoactivation by illumination with a continuous or pulsed UV laser. Both quantitative video imaging and a new photometric method were utilized to determine the rates of diffusion of the caged fluorescent dyes: 8-((4,5-dimethoxy-2-nitrobenzyl)oxy)pyrene-1,3,6-trisulfonic acid (DMNB-HPTS) and (4,5-dimethoxy-2-nitrobenzyl) fluorescein dextran (10,000 MW) (DMNB-caged fluorescein dextran). The diffusion coefficients at 37 degrees C in free solution were 3.3 x 10(-6) cm2/s (HPTS) and 0.98 x 10(-6) cm2/s (10,000 MW dextran). Diffusion of HPTS within nominally linear stretches of the LIS of MDCK cells grown on glass coverslips was indistinguishable from that in free solution, whereas dextran showed a 1.6 +/- 0.5-fold reduction in diffusivity. Measurements of HPTS diffusion within the LIS of multicellular regions also exhibited a diffusivity comparable to the free solution value. The restriction to diffusion of the dextran within the LIS may be due to molecular hindrance.     

Linear Aliphatic Dialkynes as Alternative Linkers for Double‐Click Stapling of p53‐Derived Peptides

We investigated linear aliphatic dialkynes as a new structural class of i,i+7 linkers for the double‐click stapling of p53‐based peptides. The optimal combination of azido amino acids and dialkynyl linker length for MDM2 binding was determined. In a direct comparison between aliphatic and aromatic staple scaffolds, the aliphatic staples resulted in superior binding to MDM2 in vitro and superior p53‐activating capability in cells when using a diazidopeptide derived from phage display. This work demonstrates that the nature of the staple scaffold is an important factor that can affect peptide bioactivity in cells.     

Reference model for data interchange standards

The World Wide Web is based on the simple assumption that all documents are represented in a standard format using copymarks that denote structure as defined by HyperText Markup Language. They use a standard document identification scheme, a URL (uniform resource locator) and a standard retrieval form, HTTP (hypertext transfer protocol). The HTML, URL, and HTTP standards are simplifications of the more comprehensive standards on which they are based. Even with this simplicity, WWW document interchange standards have dramatically improved the exchange of electronic information. These developments are encouraging, but they indicate that we must pay even more attention to data interchange standards in general and to document interchange standards specifically. The author discusses the need for more formal data interchange standardization