The effect of the particle size and the morphology of alumina powders on the processing of green bodies by electrophoretic deposition

The electrophoretic deposition (EPD) method was investigated for the preparation of compacts from nanosized alumina powders. Ethanol suspensions of commercially available nanosized transition alumina and α-alumina powders were used. In addition, submicron powders were also considered for comparison. Besides the influence of operational pH change, the influence of the addition of three different surfactants – two branched polyethylene imines with molecular masses 1800 and 10,000, and citric acid—on the zeta-potential of the particles in ethanol and afterwards on the EPD was investigated.The packing density of the green parts prepared by the EPD of nanosized α-alumina powders at 30 V/cm was low (the green density was 27 vol. % of the theoretical density—TD), and a bimodal pore size distribution was observed. In contrast, the packing density in deposits made with the transition alumina nanopowder was much higher (the green density was 42 vol. % of the TD) and a monomodal distribution of pores was observed. In general, for all the deposits made from nanosized alumina powders, the particle-packing density was found to be lower than for those made from the submicron alumina powders (a green density equal to 59 vol. % of the TD).     

Mycotoxins produced by Fusarium genus in maize: determination by screening and confirmatory methods based on liquid chromatography tandem mass spectrometry

A confirmatory method for fusariotoxin analysis in maize meal, based on liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS), was developed, and compared with a previously published screening method, based on the same technique. By eluting selectively from a Carbograph-4 clean-up cartridge trichothecenes, fumonisins and macrocyclic lactones, and optimizing LC–MS/MS conditions for every chemical class, a sensitive and reliable determination was performed. Method quantification limits for confirmatory and screening methods were in the range 0.001–0.019 mg/kg and 0.003–0.125 mg/kg, respectively.     

Language/Action Meets Organisational Semiotics: Situating Conversations with Norms

Virtual professional communities require a strong co-evolution of their social and information systems. To ensure that the evolutionary process of their socio-technical systems is viable, a legitimate user-driven specification process is required. Such a process helps to ensure the meaningfulness and acceptability of specification changes. A specification method supporting this process should be grounded in the neo-humanist paradigm so that subjectivist and conflict aspects receive proper attention. Two related subfields of information science that have roots in this paradigm are the Language/Action Perspective (LAP) and organisational semiotics (OS). The RENISYS method for specification of the socio-technical systems of virtual professional communities is presented. It combines aspects from both LAP and OS, by building on work done in the DEMO (LAP) and MEASUR (OS) methodologies. It thus provides an operationalization of neo-humanist ideals that can help to extend theoretical and empirical research.     

Mechanical and Electrical Properties of Cryo-worked Cu

For manufacturing the magnets of fusion machines pure copper of both high mechanical resistance and electrical conductivity is required. Though high purity copper guarantees high electrical conductivity, its mechanical properties may be not suitable for the applications in tokamaks. In this view, a new procedure developed for obtaining high purity copper with excellent mechanical strength is described in this work. Samples of oxygen free copper (OFC) have been worked by pressing in liquid nitrogen (77 K). It has been verified that the mechanical properties of the worked metal are strongly dependent on the strain rate. Very low strain rates permitted to attain values of tensile yield strength (550 MPa) significantly higher than those obtained by traditional cold-working at room temperature (450 MPa). The electrical conductivity of the cryo-worked Cu decreases with the tensile yield strength even though the hardest samples of tensile yield strength of 550 MPa exhibit still acceptable values of conductivity (about 94 % IACS at room temperature).     

45S5 bioactive glass coatings by atmospheric plasma spraying obtained from feedstocks prepared by different routes

45S5 bioactive glass powders with the composition of 45 SiO₂, 6 P₂O₅, 24.5 CaO and 24.5 wt% Na₂O were melted and quenched in water to obtain a frit. The frit was milled using two different routes: dry milling followed by sieving to obtain glass particles and wet milling followed by spray drying to obtain a powder comprising porous agglomerates. All feedstocks showed adequate characteristics that make them suitable to be deposited by atmospheric plasma spraying. The powders and coatings were characterised by field-emission gun environmental scanning electron microscope and X-ray diffraction. The roughness and the contact angle of the coatings were also determined. The bioactivity of the powders and coatings was assessed by immersion in simulated body fluid. It was found that bioactive glass prepared from bioglass frit by dry milling exhibited similar bioactivity as that of a commercial bioactive glass. All coatings produced showed good adhesion to the substrate as well as suitable surface properties to ensure efficient contact with body fluid. Regardless of the characteristics of the feedstocks or plasma spray conditions used, all coatings were exclusively made up of an amorphous phase. On the other hand, micrographs revealed that the characteristics of the feedstock strongly impact on the final coating microstructure. The most homogeneous microstructure was obtained when the feedstock was prepared by fine dry grinding of the frit. For this coating, the formation of a bioactive layer was also proved by Fourier transform infrared spectroscopy and X-ray diffraction.     

Levels of mycotoxins and sample cytotoxicity of selected organic and conventional grain-based products purchased from Finnish and Italian markets

The contamination levels of 16 different Fusarium- and Aspergillus-mycotoxins were chemically determined from randomly selected organic and conventional grain-based products purchased from Finnish and Italian markets. The cytotoxicity of the samples was analyzed with an in vitro test using feline fetal lung cells. Overall, the concentrations of the mycotoxins studied were low in all of the samples. Enniatins B and B1 as well as deoxynivalenol were the most predominant mycotoxins in the samples, being present in 97%, 97%, and 90% of the samples, respectively. The geographical origin or the agricultural practice had no influence on the mycotoxin concentrations of the samples. The babyfoods included in the samples had significantly lower concentrations of mycotoxins than the other products with a mean total mycotoxin content of 47 microg/kg compared with 99 microg/kg for the other kinds of food. All the samples evoked toxicity in the in vitro test, but no correlation between cytotoxicity and the mycotoxin concentrations was observed.     

Thymosin β4 is differentially expressed in the cerebrospinal fluid of Creutzfeldt‐Jakob disease patients: a MALDI‐TOF MS protein profiling study

MALDI‐TOF protein profiling analysis permits the detection of peptides and small proteins in complex protein mixtures with great accuracy. We applied this analysis to cerebrospinal fluid (CSF) from 15 patients affected by Creutzfeldt‐Jakob disease (CJD). We compared the levels of the normalized ion signals of 11 sporadic and 4 genetic CJD forms with those from ten healthy control subjects and eight non‐CJD relapsing‐remitting multiple sclerosis patients. In so doing, we detected 61 differentially expressed ion signals in CJD samples compared to controls. Among the 61 signals, 3 signals had significantly increased levels with high statistical significance (p <0.0001) and were located at 3238.3 m/z, 4963.7 m/z, and 8565.3 m/z. We characterized the 5.0 and 8.6 kDa proteins as thymosin β4 N‐acetylated and free ubiquitin, respectively, while the 3.2‐kDa peptide remained uncharacterized. Although elevated ubiquitin levels have previously been described in CJD, we have demonstrated for the first time the involvement of thymosin β4 in a neurodegenerative disease. To support the validity of thymosin β4 levels obtained by MALDI‐TOF analysis, an independent enzyme immunoassay analysis was performed. Moreover, a validation cohort consisting of CSF from three CJD patients, five healthy subjects, and six non‐CJD relapsing‐remitting multiple sclerosis patients was analyzed in a similar way, yielding superimposable results. We propose that thymosin β4 is a potential new candidate marker for the ante mortem diagnosis of CJD disease.