Controlling Nozzle Clogging by Secondary Steelmaking Without Reheating

Ever since continuous casting was introduced, nozzle clogging has been a recurring subject of metallurgical research and publications. Nozzle clogging is caused by the deposition of non‐metallic inclusions – on the casting equipment – which are solid at the temperature of casting. Calcium treatment already represents a possible solution to eliminate this phenomenon, but there are special steel grades which do not allow its application either because they are price sensitive or for certain other reasons.³ Cleaning the steel melt by agitation is an alternative solution, but it has time constraints due to the cooling of the melt. Over extensive cooling can be prevented by heating the melt (in ladle), but its introduction and operational costs per heat are often too high for an individual steelmaking plant to afford. The goal of our research is to find metallurgical solution to reduce the rate of nozzle clogging in plants which do not possess a ladle furnace and the time devoted to treatment or the price of the product do not allow Ca‐treatment to be applied.     

Cold Atmospheric Plasma Apoptotic and Oxidative Effects on MCF7 and HCC1806 Human Breast Cancer Cells

Breast cancer (BC) is a malignant neoplasia with the highest incidence and mortality rates in women worldwide. Currently, therapies include surgery, radiotherapy, and chemotherapy, including targeted therapies in some cases. However, treatments are often associated with serious adverse effects. Looking for new options in BC treatment, we evaluated the therapeutic potential of cold atmospheric plasma (CAP) in two cell lines (MCF7 and HCC1806) with distinct histological features. Apoptosis seemed to be the most prevalent type of death, as corroborated by several biochemical features, including phosphatidylserine exposure, the disruption of mitochondrial membrane potential, an increase in BAX/BCL2 ratio and procaspase 3 loss. Moreover, the accumulation of cells in the G2/M phase of the cell cycle points to the loss of replication ability and decreased survival. Despite reported toxic concentrations of peroxides in culture media exposed to plasma, intracellular peroxide concentration was overall decreased accompanying a reduction in GSH levels shortly after plasma exposure in both cell lines. In HCC1806, elevated nitric oxide (NO) concentration accompanied by reduced superoxide levels suggests that these cells are capable of converting plasma-derived nitrites into NO that competes with superoxide dismutase (SOD) for superoxide to form peroxinitrite. The concomitant inhibition of the antioxidative activity of cells during CAP treatment, particularly the inhibition of cytochrome c oxidase with sodium azide, synergistically increased plasma toxicity. Thus, this in vitro research enlightens the therapeutic potential of CAP in the treatment of breast cancer, elucidating its possible mechanisms of action.     

Liquid flow in molds with prelocated fiber mats

The mechanism associated with mold filling in the manufacture of structural RIM (SRIM) and resin transfer molding (RTM) composites is studied by means of flow visualization and pressure drop measurements. To facilitate this study, an acrylic mold with a variable cavity was constructed and the flow patterns of nonreactive fluid flowing through various layers, types, and combinations of preplaced glass fiber reinforcement mats were photographed for both evacuated and nonevacuated molds. The pressure drops in the flow through a single type of reinforcement (e.g., a continuous strand random fiber mat) and also a combination of reinforcement types (e.g., a stitched bidirectional mat in combination with a random fiber mat) were recorded at various flow rates to simulate high-speed feeding processes (e.g., SRIM) and low-speed feeding processes (e.g., RTM). By changing the amount of reinforcement placed into the mold, the permeabilities of the different types and combinations of glass fiber mats were obtained as a function of porosity. It is shown that partially evacuating the mold cavity decreases the size of bubbles or voids in the liquid, but ultimately increases the maximum pressure during filling. The results also show that glass fiber mats exhibit anisotropic permeabilities with the thickness permeability, K_z, being extremely important and often the determining factor in the pressure generated in the mold during filling.     

Zur endogene Lipidperoxidation bei diätetischer Belastung des Masthuhns

Endogenous Lipid Peroxidation in Broiler Chickens under Dietary Loads Growing broiler chickens were fed a Vitamin E-deficient diet containing 10% reesterified triglyceride from soy-bean-oil. Six groups with day-old broiler chicken were supplemented with 0, 20 or 100 ppm of vitamin E. On each vitamin level one group was fed with the fresh fat, the other was supplied with the fat being oxidized. Clinical data and development of body weight were registered. The animals were euthanised after 3 weeks. Pentane production of liver mitochondria and microsomes was measured and tocopherol concentrations were determined as well as the GSH-PX-activity in liver cytosol and plasma. Deficiency of vitamin E together with a high level of dietary linoleic acid leads to an imbalance in peroxidative and antioxidative metabolism and finally to disease. It is discussed if the clinical signs after consumption of linoleic acid-rich oxidized oils are caused by specific toxic secundary products.     

Rosuvastatin Enhances the Catabolism of LDL apoB‐100 in Subjects with Combined Hyperlipidemia in a Dose Dependent Manner

Dose‐associated effects of rosuvastatin on the metabolism of apolipoprotein (apo) B‐100 in triacylglycerol rich lipoprotein (TRL, d < 1.019 g/ml) and low density lipoprotein (LDL) and of apoA‐I in high density lipoprotein (HDL) were assessed in subjects with combined hyperlipidemia. Our primary hypothesis was that maximal dose rosuvastatin would decrease the apoB‐100 production rate (PR), as well as increase apoB‐100 fractional catabolic rate (FCR). Eight subjects received placebo, rosuvastatin 5 mg/day, and rosuvastatin 40 mg/day for 8 weeks each in sequential order. The kinetics of apoB‐100 in TRL and LDL and apoA‐I in HDL were determined at the end of each phase using stable isotope methodology, gas chromatography‐mass spectrometry, and multicompartmental modeling. Rosuvastatin at 5 and 40 mg/day decreased LDL cholesterol by 44 and 54 % (both P < 0.0001), triacylglycerol by 14 % (ns) and 35 % (P < 0.01), apoB by 30 and 36 % (both P < 0.0001), respectively, and had no significant effects on HDL cholesterol or apoA‐I levels. Significant decreases in plasma markers of cholesterol synthesis and increases in cholesterol absorption markers were observed. Rosuvastatin 5 and 40 mg/day increased TRL apoB‐100 FCR by 36 and 46 % (both ns) and LDL apoB‐100 by 63 and 102 % (both P < 0.05), respectively. HDL apoA‐I PR increased with low dose rosuvastatin (12 %, P < 0.05) but not with maximal dose rosuvastatin. Neither rosuvastatin dose altered apoB‐100 PR or HDL apoA‐I FCR. Our data indicate that maximal dose rosuvastatin treatment in subjects with combined hyperlipidemia resulted in significant increases in the catabolism of LDL apoB‐100, with no significant effects on apoB‐100 production or HDL apoA‐I kinetics.     

Organically modified silica sol-mediated capillary electrophoresis

We describe in this paper the use of ormosil (organically modified silica) sols as additives to the run buffer for selectivity manipulations between solutes in capillary electrophoresis. CE systems that contain sol additives in the run buffer can be thought of as pseudocapillary electrochromatography. Three sols based on different types of silanes were studied. Methyltrimethoxysilane (MTMOS)-based sol was found to improve selectivities between various aromatic acids. Aminopropyltrimethoxysilane (APS) sol interacts differently with structural isomers of aromatic acids than does MTMOS. At low pH with APS sol in the run buffer, neutral solutes can be separated, as well. The separation of the neutral solutes seems to be facilitated by the formation of hydrogen bonds between the solutes and the APS sol. APS and N-[3-(trimethoxysilyl)propyl]-ethylenediamine (EDAS) affect the separation of the same compounds differently, thus indicating that even small changes of the functional groups of the sol have pronounced effect on the interactions between the sols and the solutes.     

Influence of the irradiation temperature on the dosimetric and high temperature TL peaks of Al2O3:C

The TL glow curves of Al2O3:C crystals have been investigated as a function of the irradiation temperature. The nature of the observed TL peaks has been studied by optical annealing. The filling of traps was found strongly dependent on the irradiation temperature in the case of UV exposure, which has been explained by the temperature dependence of the photoionisation of F centres. This latter phenomenon could have a part in the luminescence quenching and UV bleaching of F centres.     

Precise interferometric length and phase-change measurement of gauge blocks based on reproducible wringing

A modern fringe-pattern-analyzing interferometer with a resolution of 1 x 10(-9) and without exclusion of systematic uncertainties owing to optic effects of less than 1 nm was used to test a new method of interferometric length measurement based on a combination of the reproducible wringing and slave-block techniques. Measurements without excessive wringing film error are demonstrated for blocks with nominal lengths of 2-6 mm and with high surface flatness. The uncertainty achieved for these blocks is less than 1 nm. Deformations of steel gauge blocks and reference platens, caused by wringing forces, are investigated, and the necessary conditions for reproducible wringing are outlined. A subnanometer uncertainty level in phase-change-correction measurements has been achieved for gauge blocks as long as 100 mm. Limitations on the accuracy standard method of interferometric length measurements and shortcomings of the present definition of the length of the material artifact are emphasized.     

Collateral blood supply through the ophthalmic artery: a steal phenomenon analyzed by color Doppler imaging

OBJECTIVE: This study aimed to evaluate the retrobulbar circulatory effects of reversed ophthalmic artery flow (ROAF) on the ophthalmic artery branches by means of color Doppler imaging. DESIGN: The design was a case-controlled study. PARTICIPANTS: Among 56 consecutive patients with severe (>70% stenosis) occlusive carotid artery disease, 15 patients (26.8%) with ROAF were identified. The control group consisted of 15 patients with similar degrees of carotid artery stenosis and forward ophthalmic artery flow. INTERVENTION: Arteriography and measurement of the retrobulbar hemodynamic parameters with color Doppler imaging were performed. MAIN OUTCOME MEASURES: Blood flow velocities and resistive index in the ophthalmic, central retinal, and temporal short posterior ciliary arteries were measured. RESULTS: Arteriography confirmed the diagnosis of ROAF in all 15 patients. There was no patient with ROAF diagnosed by arteriography and not diagnosed by color Doppler imaging. The frequency of bilateral severe occlusive carotid artery disease was significantly higher in the ROAF group (40%) compared to the control group (6.6%) (P = 0.04). Patients with ROAF showed significantly reduced vascular resistance in the ophthalmic artery (P = 0.03), higher vascular resistance, and lower blood flow velocities in the central retinal and temporal short posterior ciliary arteries (P < 0.05). CONCLUSION: This study suggests that patients with ROAF show a steal phenomenon, characterized by a shunt to the low-resistance intracranial circuit and reduction of retrobulbar blood flow.     

The crystal structure of the processive endocellulase CelF of Clostridium cellulolyticum in complex with a thiooligosaccharide inhibitor at 2.0 A resolution

The mesophilic bacterium Clostridium cellulolyticum exports multienzyme complexes called cellulosomes to digest cellulose. One of the three major components of the cellulosome is the processive endocellulase CelF. The crystal structure of the catalytic domain of CelF in complex with two molecules of a thiooligosaccharide inhibitor was determined at 2.0 A resolution. This is the first three-dimensional structure to be solved of a member of the family 48 glycosyl hydrolases. The structure consists of an (alpha alpha)6-helix barrel with long loops on the N-terminal side of the inner helices, which form a tunnel, and an open cleft region covering one side of the barrel. One inhibitor molecule is enclosed in the tunnel, the other exposed in the open cleft. The active centre is located in a depression at the junction of the cleft and tunnel regions. Glu55 is the proposed proton donor in the cleavage reaction, while the corresponding base is proposed to be either Glu44 or Asp230. The orientation of the reducing ends of the inhibitor molecules together with the chain translation through the tunnel in the direction of the active centre indicates that CelF cleaves processively cellobiose from the reducing to the non-reducing end of the cellulose chain.