Wind energy systems

Wind energy has matured to a level of development where it is ready to become a generally accepted utility generation technology. A brief discussion of this development is presented, and the operating and design principles are discussed. Alternative designs for wind turbines and the tradeoffs that must be considered are briefly compared. Development of a wind energy system and the impacts on the utility network including frequency stability, voltage stability, and power quality are discussed. The assessment of wind power station economics and the key economic factors that determine the economic viability of a wind power plant are presented     

Optimization of the properties obtained by quenching in martensitic stainless steels X30-40Cr13 and X40-60CrMoV14

An experimental study of the effects produced by different parameters of the heat-quenching cycle permitted the optimization of the properties typical of these martensitic stainless steels: hardness and corrosion resistance. The results obtained demonstrate that the heating temperatures currently used in industrial quenching treatment of these steels should be modified.     

Study of the atrophy of the jaws

Examining 230 edentulous patients, a significant degree of atrophy in the maxilla and mandible relatively often has been found. Atrophy could be detected more often in the mandible of female patients. For these forms of manifestation, among others, systemic causes: osteoporosis, diabetes and periodontal disease could be found. The results and their classification may help to draw the attention in the course of treatment to strong dissimilarities or similarities of the edentulous mouth. The degree of atrophy observed on both jaw-bones--among other factors--is significant for the planning and prognosis when indicating total prosthetic treatment.     

Reprocessing of Microcrystalline Cellulose Spheres with Low Drug Concentrations

Spherical dosage forms have been reported to be an efficient and effective method for delivering drugs into the body and controlling their dissolution rate. Substantial work has been conducted in these laboratories illustrating the advantages of microcrystalline cellulose-based spheres for these purposes. Through various methodologies, but most routinely the extrusion and marumerization technique, it has been determined by Funck, et al. that not more than 50% drug can be incorporated into a sphere formulation without the addition of other binders.

Because of the nature of the extrusion and marumerization manufacturing process, the type of drug being processed and the resultant particle size requirements of the spheres, the percent of spheres falling outside the desired particle size can range from between 3% and 20%. For this reason and the possibility of operator errors, our objective was to determine the parameters which needed monitoring when reprocessing was necessary.     

Clonal analysis of peripheral blood lymphocytes from three patients with advanced neuroblastoma receiving recombinant interleukin-2 and interferon alpha

Cultures of both isolated and conjugated explants from early gastrulae of Bufo arenarum were prepared for a study of the development of ventral mesoderm. Only combinations including components of the deep ventral marginal zone and the animal pole successfully differentiated into blood cells (erythrocytes). Histological studies indicated that, while prospective mesodermal cells constituted the only source of such cells, prospective ectodermal cells provided the necessary stimulus for this kind of differentiation. Differentiated cultures, in which the tracer of cell-lineage fluorescein dextran amine was used to label these components, confirmed the above conclusions. These findings are discussed in the context of current concepts about the formation of mesoderm.     

A comprehensive introduction to the geometric theory of linearmultivariable systems

A simple tutorial introduction to the geometric theory of linear multivariable control is presented. This corresponds to approximately three two-hour lectures in a graduate-level course. The authors emphasise the intuitive control interpretation of the main geometric concepts. To this end, the authors focus interest on trajectory formulation for subspace invariance and discrete-time interpretation of the basic subspaces and their construction algorithms. Application of geometric theory for solving the disturbance decoupling problem is illustrated via two pedagogical examples     

Control-canonical-form method applied to generating systems to improve dynamic stability characteristics

Contents The control-canonical-form (CCF) method is introduced for the purpose of applying it to high-order state-space single-input single or multiple-output (SISO or SIMO) and multiple-input multiple-output (MIMO) linear time-invariant system models to determine closed-loop systems (i.e. design robust controllers) from which enchanced dynamic stability characteristics and overall performance of these systems is achieved. The method has been applied successfully to a SISO 6th-order linearized state-space open-loop model (representing a simplified hydro power system), and to a MIMO 8th-order linearized state-space open-loop model (representing an 87.5 kVA synchronous machine with conventional exciter supplying power to an electric utility system through an interconnection network)

---

Anwendung der kanonischen Form der Zustandsrückführung auf Erzeugersysteme zur Verbesserung der dynamischen Stabilitätseigenschaften

Übersicht Die Methode der kanonischen Form wird auf lineare zeitinvariante Systeme höherer Ordnung im Zustandsraum angewendet, die eine oder mehrere Eingangsgrößen bei einer oder mehreren Ausgangsgrößen aufweisen. Damit werden robuste Regler entworfen, welche die dynamische Stabilität und das gesamte Betriebsverhalten verbessern. Die Methode wurde erfolgreich auf ein linearisiertes Modell sechster Ordnung mit einem Eingang und einem Ausgang angewendet, das vereinfachend eine Wasserkraftanlage darstellt; außerdem auf ein linearisiertes Zustandsmodell achter Ordnung einer Synchronmaschine 87,5kVA mit konventioneller Erregung, die über ein Verbindungsnetzwerk in das öffentliche Netz einspeist.

     

Topical use of aprotinin in open heart operations

Among various pharmacological agents used to reduce bleeding after open-heart operations, high-dose aprotinin therapy seems most promising. However, its long-term effects are still obscure; there is almost always possibility of bypass graft occlusions produced by the hypercoagulable state induced by aprotinin in coronary bypass operations. Topical application of aprotinin into the pericardial cavity could prevent the adverse effects. Fifty patients were prospectively studied to evaluate the effects of topical aprotinin. One million KIU of aprotinin was poured into the pericardial cavity before closure of the sternotomy in group 1 (n = 25). Patients in group 2 (n = 25) served as controls. Total postoperative bleeding was significantly reduced in group 1 when compared with that of group 2 (722.7 +/- 230.8 versus 1,282.6 +/- 225.7 mL; p < 0.01). The use of banked donor blood products was significantly less in group 1 than in group 2 (0.33 +/- 0.67 versus 1.36 +/- 0.86 units; p < 0.01). These results show that topical use of aprotinin reduces post-operative blood loss and need for transfusion. It seems promising and warrants further studies to be done.