我国磷石膏资源化利用现状及发展前景综述(续完)

4 磷石膏的工业应用 4．1磷石膏制建筑材料磷石膏可用于生产石膏粉，石膏粉有不同的类型、性质和用途，其主要类型是半水硫酸钙和无水硫酸钙。由半水硫酸钙和无水硫酸钙可生产各种石膏制品。     

石油钻采机械用橡胶气囊的研制

橡胶气囊是石油钻采设备上常用的一种刹车装置。介绍了橡胶气囊的模具设计、铜气嘴的处理、排气槽的加工布置等整个研制过程。经试验，生产制作的橡胶气囊完全达到设计要求。     

Pr^3＋掺杂的TiO2纳米粉体的表面特性和光催化活性

利用酸催化的溶胶-凝胶法制备了纯的和不同Pr^3＋掺杂量的TiO2纳米粉体．以亚甲基蓝（MB）溶液的光催化降解为探针反应，评价了它们的光催化活性．利用XRD和BET技术研究了Pr^3＋掺杂量和焙烧温度对TiO2纳米粉体的相结构、晶粒尺寸和表面织构特性的影响，并用XPS和SPS技术研究了Pr^3＋掺杂的TiO2纳米粉体的表面组成和表面光伏特性，探讨了Pr^3＋掺杂提高纳米TiO2的光催化活性的机制．结果表明：适量Pr^3＋掺杂能显著提高纳米TiO2的光催化活性．当Pr^3＋掺杂量为1．25％（以Pr^3＋／TiO2质量比计），焙烧温度为600℃时，制得粉体的光催化活性最佳．Pr^3＋掺杂强烈地抑制TiO2由锐钛矿相向金红石相的转变，减小晶粒尺寸，增大比表面积，增加表面羟基和吸附氧的含量，提高光生电子和空穴的分离效率，改善粉体表面的光吸收性能，上述因素均有利于光催化活性的提高．     

Measurement of the rheological properties of polymer melts with annular rheometer

An annular die has been designed having a very thin gap distance between two coaxial cylinders. The die was then used to measure wall normal stresses along the longitudinal direction of polymer melts flowing through the thin annulus. The materials investigated were high-density polyethylene, low-density polyethylene, polypropylene, and polystyrene. Also investigated were blends of polystyrene and polypropylene, and blends of polystyrene and high-density polyethylene The measurements of wall normal stresses were used to determine the rheological properties of the melts, namely, the melt viscosity from the slope of axial wall normal stress profiles and the melt elasticity from exit pressures. The interpretation of the experimental data was made possible by the fact that the narrow-gap annular die can be considered as a substitute for a thin slit die. It has been found that the results obtained in the present study are consistent with those reported earlier by the author, who at that time used both capillary and slit dies.     

Collaborative representation with reduced residual for face recognition

Collaboration representation-based classification (CRC) was proposed as an alternative approach to the sparse representation method with similar efficiency. The CRC is essentially a competition scheme for the training samples to compete with each other in representing the test sample, and the training class with the minimum representation residual from the test sample wins the competition in the classification. However, the representation error is usually calculated based on the Euclidean distance between a test sample and the weighted sum of all the same-class samples. This paper exploits alternative methods of calculating the representation error in the CRC methods to reduce the representation residual in a more optimal way, so that the sample classes compete with each other in a closer range to represent the test sample. A large number of face recognition experiments on three face image databases show that the CRC methods with optimized presentation residual achieve better performance than the original CRC, and the maximum improvement in classification accuracy is up to 12 %.     

Rheological properties of mixtures of molten polymer and fluorocarbon blowing agent. I. Mixtures of low-density polyethylene and fluorocarbon blowing agent

The viscosities of mixtures of low-density polyethylene and fluorocarbon blowing agent were determined from the measurement of wall normal stress along the longitudinal axis of a capillary die. For the study, three different grades of commercial high-pressure low-density polyethylene were used, together with the following fluorocarbon blowing agents, dichlorodifluoromethane (FC-12), dichlorotetrafluoroethane (FC-114), and blends of FC-12 and FC-114. In the experiment, blowing agent concentration and melt temperature were varied for each combination of polymer and blowing agent employed. Analysis of the experimental data has led to a correlation between the viscosity reduction factor (VRF) and the blowing agent concentration, in which VRF is defined as the ratio of the viscosity of polymer-blowing agent mixture to that of the polymer alone. It was found that the correlation obtained is independent of shear rate and temperature and dependent upon only the type of fluorocarbon blowing agent. The practical significance of the correlation is discussed. We have shown that the entrance pressure drop obtained in the absence of phase separation in the entrance region may be used as a measure of the elastic properties of mixtures of fluorocarbon blowing agent and low-density polyethylene resin.     

正丁醇水溶液通氨气法制备TiO2粉体

以TiCl4为原料,正丁醇和水的混合液为溶剂,通入氨气促使TiCl4水解,制备出不同粒径的TiO2粉体.由X射线衍射、场发射扫描电镜和激光粒度仪对样品进行了表征.研究了温度、pH值对粉体的晶型、形貌和粒径的影响.结果表明:在80 ℃通氨气,3≤pH≤8时,所得TiO2粉体均为锐钛矿和金红石的混相,且pH=3时制得的粉体为60 nm左右的球形颗粒,分散性很好;而pH=6,8时所得的粉体团聚严重;室温(20～30 ℃)下通氨至pH=6也可得到分散性较好的无定型态TiO2粉体,但粉体粒径增大,约170nm左右.     

钛系聚酯催化剂的研究进展

介绍了聚酯催化剂中锑、锗、钛三个系列的各自特点，综述了复合型钛系和超细TiO2型聚酯催化剂的最新进展，认为新型钛系催化剂催化活性更高，更环保，而且用它合成的聚酯产品色相好，热稳定性得到了改善。     

热合法聚异丁烯丁二酰亚胺合成工艺研究

研究了采用直接热加合法合成聚异丁烯丁二酰亚胺的工艺过程。将活性聚异丁烯与马来酸酐直接反应生成聚异丁烯丁二酸酐,然后再与四乙烯五胺进行胺化反应得到目的产物,过程中不使用毒性大的氯气和不安全的引发剂,使得该法安全且具有污染小、产品中氯质量浓度低于30mg.L-1等优点。实验考察了配料比、温度、聚异丁烯相对分子质量以及反应时间对产物性能的影响,确定了最佳工艺条件。     

四唑嘧磺隆水分散粒剂在稻田环境中的残留动态

为评价除草剂四唑嘧磺隆在水稻上使用后的残留动态及环境安全性，在北京海淀区进行了50％四唑嘧磺隆水分散粒剂在水稻上的残留动态和最终残留试验研究。样品经丙酮提取抽滤后，再经液液分配及氧化铝柱净化、浓缩、定容后，用紫外检测器的液相色谱进行测定。其有效成分四唑嘧磺隆的最低检出量为0．02ng，在稻田水、土壤、鲜植株、稻壳、糙米样品中的平均回收率为82．4％-105．0％，变异系数为1．1％～14．1％，符合农药残留分析的要求。结果表明：四唑嘧磺隆在水稻植株上的半衰期为2．4d，在土壤巾的半衰期为5．5d，在稻田水中的半衰期为1．9d，施药后7d四唑嘧磺隆在水稻植株上的消解达到80％以上。50％四唑嘧磺隆水分散粒剂按80、120g／hm。使用，施药1次，收获时，四唑嘧磺降在糙米、稻壳、稻草、土壤中的残留量均未检出。