羧酸系列集油剂的水面集油性能

研究了十二烷酸、十四烷酸、十六烷酸和十八烷酸在淡水中的集油能力。结果表明，这4种羧酸在淡水表面的表面膜压随其分子中碳数的增加而增大。其中后两者的表面膜压高达45～50mN／m，显著高于各类油膜膜压，满足集油剂对表面活性物质膜压的要求。4种脂肪羧酸在淡水中使柴油油膜的收缩率在1min时达到最大值，分别为80．0％、81．8％、83．8％和88．2％。它们的己醇、正庚醇、正辛醇、仲辛醇溶液的集油持续性，总体上随羧酸分子碳数增加而增大。其中十六烷酸和十八烷酸集油能力非常接近，它们的正庚醇、正辛醇和仲辛醇溶液使柴油膜面积收缩率在120h后仍保持在66．0％～70．2％。该类集油剂毒性低，易为生物降解，有实际应用前景。     

低差错平底特性的非规则LDPC码的设计

介绍了非规则LDPC码的发展并给出了其优势及缺点，重点论述用ACE算法来构造非规则LDPC码从而降低其差错平底特性。对降低非规则LDPC码的差错平底特性的其它方法提出了展望。     

火工品压药机装配误差的研究

针对军用雷管生产线中压药机结构,分别用极值法和概率法对压药机冲子和雷管的配合精度,进行了装配尺寸链的描述和计算,并对所得的结果进行了比较。     

可编程模拟器件与技术新进展

简述可编程模拟器件的基本原理、典型应用和开发方法,介绍并比较主要的模拟可编程实现技术与主流器件系列,指出现存的主要问题并展望其未来发展方向.     

T8钢－聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性、磨料磨损特性及对土壤的减粘降阻性能与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％～２２．２７％     

Interaction of triton X-100 on silica: A relationship between surface characteristics and adsorption isotherms

Adsorption of Triton X-100 on various silica substrates has been investigated. A number of solids, including a natural quartz, this quartz washed with HCl acid and subsequently heated at 1273 K; two aerosils and one Kieselgel silicas were studied. These solids exhibit surface areas in the range of 5 to 430 m² g^?1. All the Triton adsorption isotherms display an S-shape at the adsorption temperatures studied (298 and 308 K). It has been found that the pretreatments of natural quartz (by water washing, impurities removed by acid and/or high temperature calcination) affect considerably the amounts of TX-100 adsorbed. Measurements of surface composition have been made by X-ray photoelectron spectroscopy (XPS) with particular emphasis on the presence of impurities and on the number of OH groups at the surface of the samples. The nature of the surface hydroxyl has also been studied by infrared spectroscopy. Furthermore, the specific number of hydroxyl groups on the surface of the silica samples has been determined by thermogravimetric analysis. Finally an attempt to correlate solid surface characteristics with adsorption isotherms has been developed.     

A Special Structure in Al-Mg-Li Alloy (01420) Weld Metal

A large quantity of laminated fine grain zones were observed in the Al-Mg-Li alloy weld metal by manual TIG, which was not found in ordinary Al alloy welds. The fine grain zone is formed because of the Al3(Zr,Ti) particles in the filler metal and the manual filling of filler metal in welding process     

屏蔽暂堵技术在青西地区的应用

对玉门油田青西地区裂缝性储层的保护方法 ,最有效的技术手段就是利用屏蔽暂堵技术。根据该地区储层岩性不同 ,分别选用聚磺、金属离子、阳离子钻井液体系 ,在原浆的基础上加入EP - 2、LF - 1和硅油消泡剂 ,配制成屏蔽暂堵钻井液体系。通过室内试验 :屏蔽暂堵钻井液体系API失水小于 5ml,HTHP失水小于 13ml,岩心渗透率恢复值大于 70 % ,起到了良好的屏蔽暂堵效果。经完井试油发现 ,储层污染明显减小 ,产量与邻井相比有大幅度提高     

甲醇氧化羰化制碳酸二甲酯产物气相色谱分析

以Chromosorb 10 1为固定相 ,气相色谱法分析甲醇氧化羰化制碳酸二甲酯产物中水、甲醇、乙酸甲酯和碳酸二甲酯等组份的含量 ,考察了柱温 ,载气流量对分离度的影响 ,确定了适宜的分析条件 ,并用校正面积归一化法定量。该方法操作简便 ,快速 ,精度高 ,重现性好     

铝冷轧制油应用和生产工艺研究

通过对铝材冷轧工艺的分析。研究，以退火工艺中的斑痕为重点，提出采用加氢处理，异构化精制的石蜡基航空煤油组分为基础油，采用不同复合添加剂生产的通用铝冷轧制油完全可以满足客户要求。