非织造布印花技术探讨

介绍了应用于非织造布印花的技术及工艺，对非织造布印花时应注意的事项进行了说明。     

Synthesis and aqueous solution behaviors of sodium sulfonate‐terminated dendritic poly(ester‐amine)

Sodium sulfonate‐terminated dendritic poly(ester‐amine) (SPEA) was synthesized by sulfonation of acrylic double bond‐terminated dendritic poly(ester‐amine) (APEA) with sodium hydrogen sulfite (NaHSO₃) in mixture of diglycol and 2‐butanone under normal pressure. The structure of SPEA was characterized by IR, ¹H‐NMR, and elemental analysis. SPEA was water‐soluble. 1.0–40.0% (mass) SPEA aqueous solutions appeared as dilatant fluid. When pH value varied from 1.5 to 12.0, the viscosity of 1–5% (mass) SPEA aqueous solutions changed very small, and the electric conductivity almost kept stable within pH 3.0–10.0. The relationship between the viscosity and the concentration of SPEA water solutions was similar to that of NaCl water solutions. The surface tension of SPEA water solutions was lower than that of polyethylene glycol 2000 water solutions with the same concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal and mechanical properties of epoxy composites reinforced by a natural hydrophobic sand

If a low weight percentage of crude fine fillers can improve properties of polymer materials directly without complicated chemical treatment process involved, it will be significant for many industrial applications. Our previous study indicated that a kind of Cancun natural sand could be an effective filler material for polymer composites. In this current work, the epoxy composites reinforced by this kind of natural sand particles were prepared and thermal and mechanical properties of the composites containing up to 5 wt % of the sand particles were characterized. Results showed that the highest flexural strength appears in the epoxy composite containing 1 wt % sand particles. A damage model was used to interpret the flexural properties, which showed an acceptable agreement with the experimental results. The glass transition temperature, high temperature storage modulus, and dimensional stability of the sand/epoxy composites monotonically increased with the addition of the sand particles. The sand particle/epoxy composites also displayed a noticeable enhancement in thermal conductivity. Theoretical analysis showed that in addition to conduction, other heat transport mechanisms played roles in the improved heat transmission through the composites. As a natural porous micron-scale material, Cancun sand has the potential for applications in cost-effective composites with enhanced mechanical and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

使用IP/NetBEUI组合协议建造跨VLAN的VoD网站的方法

介绍一种使用IP和NetBEUI组合协议建造Intranet内部VoD（视频点播）网站的简 便技术。并已成功地运用这一技术建成了莆田学院的VoD网站。     

Piezoelectric Nanogenerators for Self-Powered Nanodevices

A novel approach converts nanoscale mechanical energy into electric energy for self-powering nanodevices.In our own work, we've used piezoelectric zinc-oxide nanowire (ZnO NW) arrays to demonstrate a novel approach for converting nanoscale mechanical energy into electric energy. Here, we review the fundamental principle behind the nanogenerator, present an approach for improving its performance, and discuss some of the challenges we face in pushing this technology to reach its potential.     

钾基CO2吸收剂的碳酸化反应特性

对钾基CO2吸收剂的碳酸化反应机理进行研究.利用热重分析、XRD、扫描电镜和氮吸附仪进行试验.结果表明:分析纯碳酸钾的组分为K2CO3·1.5H2O,碳酸化反应速率缓慢;先将分析纯碳酸钾样品脱除结晶水后再进行碳酸化反应时,K2CO3与气氛中的水蒸气迅速生成K2CO3·1.5H2O,不利于碳酸化反应的进行;由KHCO3分解产生的K2CO3却表现出优越的碳酸化反应性能,20 min内转化率高达85%以上,经过多次循环试验后吸收剂仍保持很高的活性.从微观角度分析了两种改性钾基CO2吸收剂碳酸化反应机理差异的原因,通过拟合计算得到了这3种钾基吸收剂的碳酸化反应速率常数,为干法K2CO3/KHCO3循环脱除CO2的研究提供了一定的基础数据.     

首尔地面公交系统改革的成功经验

随着经济、人口的快速发展,首尔开展了一次针对地面公交系统的成功而深刻的变革。其中包括组建以公众参与为基础的公交系统改革公民委员会,形成了“以线路连接为导向的公交系统”,采用新型公交智能卡、票价新制度以及信息一体化的管理系统。