Dynamic reaction inside co‐rotating twin screw extruder. I. Truck tire model material/polypropylene blends

Waste ground rubber tire (WGRT) is a complex composite containing various elastomers, carbon black, zinc oxide, stearic acid, processing oils, and other curatives. Most of the waste ground rubber tire is composed of mainly natural rubber (NR) and styrene butadiene rubber (SBR) in varying proportions. Blending it with other thermoplastic materials is difficult due to the inherent thermodynamic incompatibility. But, the compatibility can be increased by making the reactive sites in WGRT with suitable chemicals under optimum condition of shearing inside a twin screw extruder and it is said to undergo a dynamic reaction inside the extruder. To understand the mechanism of dynamic reaction process of a rubber/polyolefin blend, the blending of a truck tire model material rubber with polyolefin was first tried before it was applied to waste WGRT material. It was observed that the blends of a truck tire model rubber material and PP thermoplastic are physical mixture of two incompatible polymers in which a continuous plastic phase is largely responsible for the tensile properties. The rubber particles are the dispersed phase. The large particle size and the poor adhesion of these rubber particles are believed to be liable for the poor tensile properties. In case of blends of truck tire model material with isotactic polypropylene the tensile properties are found to be lower than that of its PP‐g‐MA counterpart which can be attributed to the reaction of the MA with the carbon black particles. A schematic representation of the possible interactions has been proposed. The effect of addition of compatibilizers such as SEBS and SEBS‐g‐MA has also been studied. The tensile and TGA studies indicate that the polarity of SEBS and SEBS‐g‐MA induces an increase in the performance characteristics for both types of polyolefins but the intensity of this increase is higher in the PP‐g‐MA based blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 106: 3193–3208, 2007     

Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

在方箱炉、圆筒炉中区域法计算辐射传热的数学模型及其应用

本文叙述了以区域法计算辐射传热的数学模型。在区域法中,系统被分为表面区和气体区,区域数取决于所要求的结果精度和计算时间。炉子的温度分布可通过解每区的能量平衡而得。作为Hottel和Cohen的原始开发,直接交换面积限于立方体和正方形;本文给出了在方箱炉、圆筒炉中任何两区之间直接交换面积方程式的推导。这些方程式可适用于任何大小的矩形、共轴圆筒壁、炉底环形区和其他形状。 本文提供了一个关于烃类一段蒸汽转化炉和圆筒炉的设计方法。计及反应动力学、对流传热、管内压降,采用区域法计算这些炉子的温度分布,从而预言工艺气、烟气、管表面和耐火墙表面的温度分布。计算结果与工厂实测数据相吻合。     

液相合成纳米氧化锌及其光催化性能探讨

以硝酸锌和氢氧化钠为原料,分别以水和醇作为溶剂,采用液相直接沉淀法合成纳米氧化锌。在以水为反应溶剂条件下,研究了反应时间、反应温度、反应物浓度和反应物配比对纳米氧化锌中位径和形貌的影响,得到制备较小中位径及合适长径比纳米氧化锌的最优反应条件,即:反应时间为3 h、反应温度为70 ℃、锌离子浓度为0.5 mol/L、锌离子与氢氧根浓度比为1:2。在上述最优反应条件下,研究了不同醇溶剂对纳米氧化锌中位径、形貌及其光催化性能的影响。研究发现,随着溶剂碳链长度的增长,纳米氧化锌中位径呈现上下波动,无明显变化规律,形貌由球状向柱状发展,光催化性能总体不断减弱。     

保证云存储的数据安全

近几年来,云存储的使用越来越广泛,不仅是中小型企业,而且针对个体用户也可以购买云存储服务,但如何在云存储中保证数据的安全性和机密性,单靠云存储服务供应商的承诺是难以让人信服的。本文提出了一种保证数据安全的云存储框架,并且使用服务等级协议（SLA）作为用户和供应商之间的共同标准。此外,本文还提及了几种保证云存储数据安全的技术,这些技术可以被分成三类：存储保护,传输保护和授权保护。     

基于物联网技术的智能家居系统的研究

随着国际信息技术的发展,物联网已成为发展的主流;其中的智能家居系统,作为物联网发展的十大重点领域之一,也得到快速的发展.克服传统的智能家居系统内部有线组网的弊端,本文研究采用无线通信技术来组建家庭无线局域网的硬件系统,先对设计了总体的系统图,然后分别对硬件系统和软件系统分别进行设计,其中软件系统基于UC/OS-Ⅱ嵌入式操作系统的应用软件的开发,使用户操作起来更加方便,界面更加友好.     

An approach for minimizing a quadratically constrained fractional quadratic problem with application to the communications over wireless channels

Studies for the cognitive model are relatively new in the literature; however there is a growing interest in the communication field nowadays. This paper considers the cognitive model in the communication field as the problem of minimizing a fractional quadratic problem, subject to two or more quadratic constraints in complex field. Although both denominator and numerator in the fractional problem are convex, this problem is not so simple since the quotient of convex functions is not convex in most cases. We first change the fractional problem into a non-fractional one. Second, we consider the semi-definite programming (SDP) method. For the problem with m (m≤2) constraints, we use the SDP relaxation and obtain the exact optimal solution. However, for the problem with m (m>2) constraints, we choose the randomization method to gain an approximation solution in the complex case. At last, we apply this method to practical communications over wireless channels with good results.     

纳米级无机粒子对聚乙烯的增强与增韧

对μｍ级ＣａＣＯ３、ＴｉＯ２和ｎｍ级ＳｉＣ／Ｓｉ３Ｎ４粒子填充ＬＤＰＥ的性能进行了研究。实验证明，μｍ级粒子对ＬＤＰＥ虽无明显的增强增韧作用，但也未使基体的机械性能大幅度下降。ｎｍ级ＳｉＣ／Ｓｉ３Ｎ４对ＬＤＰＥ有较大的增强增韧作用，在５％质量分数时冲击强度出现最大值，缺口冲击强度达５５．７ｋＪ／ｍ２为纯ＬＤＰＥ的２０３％；伸长率到６２５％时仍未断裂，为纯ＬＤＰＥ的５００％，但熔体流动速率急剧下降，仅为纯ＬＤＰＥ的２６％，当含量在３％和１５％质量分数时，熔体流动速率分别为纯ＬＤＰＥ的３３７％和１５１％。     

有机-无机(硅溶胶)复合涂料的制备

有机-无机(硅溶胶)复合涂料，既具有硅溶胶耐候性好、硬度高、附着力强、耐水、耐碱、耐沾污等特点，又具有有机聚合物成膜性好、韧性大、光泽高等特点。本法选用江阴国联化工有限公司生产的交联改性的苯乙烯-丙烯酸酯乳液与硅溶胶通过物理混拼法，并辅以适当的颜填料、助剂制备的涂料，可作为外墙封闭型底漆用于水泥砂浆、混凝土等硅酸盐基材及用于外墙装饰。文章还述及制备工艺及注意事项。