Synthesis,conductivity and dielectric characterization of salicylic acid–Fe3O4 nanocomposite

We report on the synthesis of water dispersible salicylic acid –Fe₃O₄ nanocomposites via a co-precipitation route by using Fe(III) and Fe(II) chloride salts, and salicylic acid. Crystalline phase was identified as Fe₃O₄ and the crystallite size was obtained as 13 ± 6 nm from X-ray line profile fitting. As compared to the particle size of 20 nm obtained from TEM analysis these particles show polycrystalline nature. The capping of salicylic acid around Fe₃O₄ nanoparticles was confirmed by FTIR spectroscopy, the interaction being via bridging oxygens of the carboxylate and the nanoparticle surface. ac and dc conductivity measurements performed on the nanocomposite revealed semiconductor characteristics and varying trends with temperature due to reorganization of the nanocomposite. Permittivity measurements showed increasing dielectric constant with increasing temperature as expected from semiconductors. Analysis of electrical modulus and dielectric permittivity functions suggest that ionic and polymer segmental motions are strongly coupled in the nanocomposite.     

Microfabricated Biomaterials for Engineering 3D Tissues

Mimicking natural tissue structure is crucial for engineered tissues with intended applications ranging from regenerative medicine to biorobotics. Native tissues are highly organized at the microscale, thus making these natural characteristics an integral part of creating effective biomimetic tissue structures. There exists a growing appreciation that the incorporation of similar highly organized microscale structures in tissue engineering may yield a remedy for problems ranging from vascularization to cell function control/determination. In this review, we highlight the recent progress in the field of microscale tissue engineering and discuss the use of various biomaterials for generating engineered tissue structures with microscale features. In particular, we will discuss the use of microscale approaches to engineer the architecture of scaffolds, generate artificial vasculature, and control cellular orientation and differentiation. In addition, the emergence of microfabricated tissue units and the modular assembly to emulate hierarchical tissues will be discussed.     

Fast and Highly Sensitive Ionic‐Polymer‐Gated WS2–Graphene Photodetectors

The combination of graphene with semiconductor materials in heterostructure photodetectors enables amplified detection of femtowatt light signals using micrometer‐scale electronic devices. Presently, long‐lived charge traps limit the speed of such detectors, and impractical strategies, e.g., the use of large gate‐voltage pulses, have been employed to achieve bandwidths suitable for applications such as video‐frame‐rate imaging. Here, atomically thin graphene–WS₂ heterostructure photodetectors encapsulated in an ionic polymer are reported, which are uniquely able to operate at bandwidths up to 1.5 kHz whilst maintaining internal gain as large as 10⁶. Highly mobile ions and the nanometer‐scale Debye length of the ionic polymer are used to screen charge traps and tune the Fermi level of the graphene over an unprecedented range at the interface with WS₂. Responsivity R = 10⁶ A W^?1 and detectivity D* = 3.8 × 10¹¹ Jones are observed, approaching that of single‐photon counters. The combination of both high responsivity and fast response times makes these photodetectors suitable for video‐frame‐rate imaging applications.     

Calibration of Expert Judgments Applied to Uncertainty Assessment

Abstract:

This article contributes a methodology for eliciting expert judgment in support of decision analysis associated with the conceptual design of advanced engineering systems. To provide a basis for decision making in the presence of model and input parameter uncertainties, experts in several disciplines can be utilized to provide model parameter estimates to facilitate analyses. The judgment elicitation methodology was developed to cover a multitude of system disciplines using multiple experts. To address consistency in expert assessments, the methodology includes expert assessment calibration means. A sample application of the resultant expert judgment methodology is discussed. An engineering manager can use the methodology described in this article to assess viability of potential courses of action in high-risk or advanced state-of-the-art technology systems development ventures.     

Abrasive Wear Volume Maps for PA6 and PA6 Composites Under Dry Working Condition

In this study the wear volume map is obtained and considered for evaluation of the abrasive wear performance for polyamide (PA6) and PA6 composites. Polyamide composites were tailored using 25 wt.% glass bead, 20 wt.% talc and 30 wt.% wollastonite fillers. In this work, the influence of filler materials, abrasion surface roughness and applied loading values on abrasive wear performance of PA6 and PA6 composites were evaluated. Experimental abrasive wear tests were carried out at atmospheric condition using pin-on-disc rig arrangement. Tests were performed under 4, 6, 8 and 10 N load values, traveling speed of 1 m/s and abrasion surface roughness values of 5, 20 and 45 μm. Wear volume maps were obtained and the results showed that the lowest wear volume rate for PA is reached using glass bead filler. Furthermore, the results also showed that the higher is the applied load and the roughness of the abrasion surface, the higher is the wear rate. Finally it is also concluded that abrasive wear process mechanism include ploughing mechanism and delimitation of filler tips.     

Electrorheological properties and creep behavior of polyindole/poly(vinyl acetate) composite suspensions

In this study, electrorheological (ER) properties of polyindole (PIN) and polyindole/poly (vinyl acetate), (PIN/PVAc) conducting composites having different compositions were investigated. Conductivities and dielectric properties of these composites were determined. The particle sizes of the composites were determined by dynamic light scattering method. Suspensions of PIN and PIN/PVAc composites were prepared in silicone oil, at several concentrations (c = 5–25%, m/m) and their sedimentation stabilities were determined. Then the effects of dispersed particle concentration, shear rate, electric field strength, frequency, and temperature onto ER activities of suspensions were investigated. The flow times of these suspensions at various dc electric field strengths were measured. Further, creep tests were applied to the composite suspensions and a reversible viscoelastic deformation was observed.     

Evaluation of sponging and antipyretic medication to reduce body temperature in febrile children

A case of large fronto-temporo-parietal epidural hematoma associated with ipsilateral retrobulbar hematoma is reported. A 24-year-old man soon after a head injury due to a traffic accident became comatose with anisocoria and hemiplegia and developed exophthalmos, conjuctival chemosis, downward and lateral displacement of the eyeball. CT scan of the brain and the orbit showed the large epidural clot communicating with an ipsilateral retrobulbar hematoma through a sphenoid bone fracture. The patient underwent emergency surgery. Postoperatively, he improved and was discharged in good conditions. On follow-up one month later he was symptoms free. The available literature is reviewed: our case seems to be the fifth reported.     

Dielectric and microstructural properties of YAG:Dy3+ ceramics

Yttrium aluminium garnet(Y_3 Al_5 O_(12):YAG) singly doped with Dy3+ at different concentrations was prepared by solid state reactions using repeated heating cycles over the temperature range of 1300-1600 ℃. X-ray powder diffraction analysis confirms the presence of a well-crystallized YAG perovskite phase with cubic structure(by Rietveld refinement). The rare earth dopant is successfully integrated into the YAG host lattice without any major changes in the original structure. The temperature dependence,up to 250 ℃, of the conductivity, dielectric constant, dielectric loss, and loss tangent, at various frequencies of up to 5.0 MHz for undoped and doped crystals is compared to understand the electrical and structural characteristics. The experimental results reveal that Dy3+ dopants in YAG crystal significantly influence the conductivity, dielectric constant, and lossy mechanisms, which is probably due to the 3 d-AI ions and 4 f-Dy ions incorporated at different positions of both tetrahedral and octahedral symmetries in YAG:xDy3+ ceramics.     

Equilibrium studies for the sorption of zinc and copper from aqueous solutions using sugar beet pulp and fly ash

In the present work, the abilities of native sugar beet pulp (SBP) and fly ash (FA) to remove copper (Cu(2+)) and zinc (Zn(2+)) ions from aqueous solutions were compared. The SBP and FA, an industrial by-product and solid waste of sugar industry, were used for the removal of copper and zinc from aqueous water. Batch adsorption experiments were performed in order to evaluate the removal efficiency of SBP and lignite-based FA. The effect of various operating variables, i.e. initial pH, adsorbent dose, initial metal ion concentration, and time on adsorption of copper and zinc onto the SBP and FA, has been studied. The sorption process was relatively fast and equilibrium was reached after about 60 min of contact. As much as 60-97% removal of copper and zinc for SBP and FA are possible in about 60 min, respectively, under the batch test conditions. Uptake showed a pH-dependent profile. The overall uptake for the SBP is at a maximum at pH 5.5 and gives up to 30.9 mg g(-1) for copper and at pH 6.0 and gives 35.6 mg g(-1) for zinc for SBP, which seems to be removed exclusively by ion exchange and physical sorption. Maximum adsorption of copper and zinc occurred 7.0 and 7.84 mg g(-1) at a pH value of 5.0 and 4.0 for FA, respectively. A dose of 8 g l(-1) of SBP and 8 g l(-1) FA were sufficient for the optimum removal of both the metal ions. The sorption data were represented by the Freundlich for SBP and the Langmuir and Freundlich for FA. The sorption data were better represented by the Langmuir isotherm than by the Freundlich one for FA in the adsorption of zinc ion, suggesting that the monolayer sorption, mainly due to ion exchange. The presence of low ionic strength or low concentration of Na and Cl ions does not have a significant effect on the adsorption of these metals by SBP and FA. The SBP and FA are shown to be effective metal adsorbents for these two metals.