The effect of pack-aluminisation on the microstructure of MCrAlY and the performance of thermal barrier coatings

Plasma spraying and pack-aluminising processes were combined and applied to the nickel-base superalloy Mar-M247 to improve its cyclic oxidation resistance. The performance tests of duplex ZrO₂-8 wt.%Y₂O₃/MCrAlY thermal barrier coatings (TBCs) were conducted at 1050 °C, 1075 °C, 1100 °C, 1150 °C and 1200 °C. The results of the experiments in this study showed that TBC specimens with the aluminised MCrAlY bond coat exhibited higher cyclic lives (except for the Ni-22Cr-10Al-1Y bond coat), at all the temperatures tested, than specimens on which the bond coat was not aluminised. The microstructures of the Co-29Cr-6Al-1Y, Co-32Ni-21Cr-8Al-0.5Y and Ni-22Cr-10Al-1Y bond coats with or without aluminising treatment were examined in detail using a scanning electron microscope equipped with an electron probe microanalyzer.     

职工持股计划在中国:理论上可行,实践上慎行

在对中美两国的职工持股计划进行分析后,本文认为职工持股计划在中国,理论上可行,但在实践中 需要谨慎行事。     

Effect of surface-modifying macromolecules and solvent evaporation time on the performance of polyethersulfone membranes for the separation of chloroform/water mixtures by pervaporation

Polyethersulfone (PES) membranes using different evaporation periods were fabricated by the phase-inversion method. Pervaporation experiments were conducted for chloroform/water mixtures to determine the selectivity of the PES membranes. It was found that chloroform could be concentrated in the permeate from chloroform/water binary feed mixtures by PES membranes prepared using longer evaporation periods, and that the selectivity of PES membranes in pervaporation could be reversed by shorter evaporation periods. This study also showed that by adding surface-modifying macromolecules (SMM) up to 1 wt % into the casting solution, chloroform enrichment in the permeate could be increased by 50%. Chloroform enrichment increased with increasing SMM concentration until an optimal value, after which the enrichment decreased. © 1994 John Wiley & Sons, Inc.     

Network model approach for calculating oscillating frequency of thermoacoustic prime mover

The network model is given and used to calculate the oscillating frequency of thermoacoustic prime mover. Theoretically calculated frequency by the model is plural, whose real part denotes actual frequency of the system, and imaginary part means attenuation coefficient of acoustic pressure. Numerical calculation is made under different conditions including different acoustic cavities, spacing between each parallel plate, gas pressures and system lengths. Theoretically calculated frequency and experimentally measured frequency are in quite good agreement.     

发电机同轴励磁机电刷火花过大的原因及处理方法

本文对发电机同轴励磁机电刷火花过大的原因进行了分析．并针对这些原因提出了相应的处理办法。对规范励磁机的运行维护有很大的帮助。     

An efficient approach for calculating the dispersions of photonic-crystal fibers: design of the nearly zero ultra-flattened dispersion

A novel and efficient approach is proposed to calculate the dispersions of the guided modes of the photonic-crystal fibers (PCFs). Based on the vector boundary-element method (VBEM), the surface integral equations for the first and second derivatives of the propagation constants with respect to the wavelength are explicitly derived. Compared with the three-point finite-difference approach, which needs to solve and search three effective indexes near the interested wavelength, this approach can determine the dispersions of the PCFs by only solving one effective index at this wavelength based on the derived formulations. This novel approach saves over 60% computing time without losing the accuracy. Based on this approach, a novel four-ring PCF is designed by optimizing only three geometrical parameters to achieve the nearly zero ultra-flattened dispersion property. Compared with previously presented dispersion-flattened PCFs, the design procedure for the four-ring structure could be more efficient and easier because relatively lesser parameters need to be optimized.     

60Co辐照预处理对苹果片脱水特性和品质的影响

进行了不同辐照剂量、热风温度、切片厚度对苹果脱水速率及品质的影响试验,结果表明该三因子影响苹果片的脱水速率和外观质量.辐照剂量增加,热风温度增高,脱水速率高,VC含量和复水比下降.辐照剂量、热风温度、切片厚度三因素对脱水速率和干制品的外观质量、VC含量、复水比等四指标大都呈显著影响.     

A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.     

PetaStar: a petabit photonic packet switch

This paper presents a new petabit photonic packet switch architecture, called PetaStar. Using a new multidimensional photonic multiplexing scheme that includes space, time, wavelength, and subcarrier domains, PetaStar is based on a three-stage Clos-network photonic switch fabric to provide scalable large-dimension switch interconnections with nanosecond reconfiguration speed. Packet buffering is implemented electronically at the input and output port controllers, allowing the central photonic switch fabric to transport high-speed optical signals without electrical-to-optical conversion. Optical time-division multiplexing technology further scales port speed beyond electronic speed up to 160 Gb/s to minimize the fiber connections. To solve output port contention and internal blocking in the three-stage Clos-network switch, we present a new matching scheme, called c-MAC, a concurrent matching algorithm for Clos-network switches. It is highly distributed such that the input-output matching and routing-path finding are concurrently performed by scheduling modules. One feasible architecture for the c-MAC scheme, where a crosspoint switch is used to provide the interconnections between the arbitration modules, is also proposed. With the c-MAC scheme, and an internal speedup of 1.5, PetaStar with a switch size of 6400 /spl times/ 6400 and total capacity of 1.024 petabit/s can be achieved at a throughput close to 100% under various traffic conditions.