Characterisation of optically driven microstructures for manipulating single DNA molecules under a fluorescence microscope

Optical tweezers are powerful tools for manipulating single DNA molecules using fluorescence microscopy, particularly in nanotechnology‐based DNA analysis. We previously proposed a manipulation technique using microstructures driven by optical tweezers that allows the handling of single giant DNA molecules of millimetre length that cannot be manipulated by conventional techniques. To further develop this technique, the authors characterised the microstructures quantitatively from the view point of fabrication and efficiency of DNA manipulation under a fluorescence microscope. The success rate and precision of the fabrications were evaluated. The results indicate that the microstructures are obtained in an aqueous solution with a precision ∼50 nm at concentrations in the order of 10⁶ particles/ml. The visibility of these microstructures under a fluorescence microscope was also characterised, along with the elucidation of the fabrication parameters needed to fine tune visibility. Manipulating yeast chromosomal DNA molecules with the microstructures illustrated the relationship between the efficiency of manipulation and the geometrical shape of the microstructure. This report provides the guidelines for designing microstructures used in single DNA molecule analysis based on on‐site DNA manipulation, and is expected to broaden the applications of this technique in the future.Inspec keywords: DNA, molecular biophysics, fluorescence, optical microscopy, radiation pressure, biological techniquesOther keywords: optically driven microstructures, single DNA molecule analysis, fluorescence microscopy, optical tweezers, nanotechnology‐based DNA analysis, manipulation technique, aqueous solution, fine tune visibility, yeast chromosomal DNA molecules, geometrical shape, on‐site DNA manipulation     

Investigation of Water Tree Degradation in Dry‐Cured and Extruded Three‐Layer (E‐E Type) 6.6‐kV Removed XLPE Cables

Dry‐cured and extruded three‐layer (E‐E type) 6.6‐kV cross‐linked polyethylene (XLPE) cables were introduced into electric power systems more than 30 years ago, but they do not experience failures because of water tree degradation. Also, the degradation index of water treeing for these cables has not been established. Therefore, investigating results of residual breakdown voltage and water tree degradation of these cables will help us plan for cable replacement and determine water tree degradation diagnosis scheduling, and will be fundamental data for cable lifetime evaluation. In this study, the authors measured the ac breakdown voltages of dry‐cured and E‐E type 6.6‐kV XLPE cables removed after 18 to 25 years of operation and observed the water trees in their XLPE insulation. As a result, it was observed that breakdown voltages were larger than the maximum operating voltage (6.9 kV) and the ac voltage for the dielectric withstanding test (10.3 kV). Water trees were mainly bow‐tie water trees and their maximum length was approximately 1 mm. Although the number of measured cables was limited, the lifetime of this type of cable was estimated to be approximately 40 years, even experiencing water immersion.     

Formation and microwave dielectric properties of Sr(Ga0.5Ta0.5)O3-based complex perovskites

The Sr(Ga0.5Ta0.5)O3-based perovskites with O2- and/or Sr2+ vacancies were formed by changing the A-site and/or B-site cation ratios. The Sr-deficient perovskites with a limited composition of Sr0.86(Ga0.36Ta0.64)O3 could be obtained, whereas oxygen vacancies were hardly created. The B′-site Ga3+ cation could be replaced with large Sc3+, In3+, Y3+, Nd3+ and La3+. The crystal symmetry of the complex perovskites changed from cubic (B′=Ga3+, Sc3+, In3+) to tetragonal (B′=La3+) through rhombohedral (B′=Y3+, Nd3+). The dielectric permittivities of these ceramics indicated no distinct dependence on the B′-site cation species. The temperature coefficient of permittivity might be associated with the symmetry change of the perovskite phases. Higher microwave Qf values, >Qf=38 000 GHz, were obtained for our complex perovskite ceramics, except with B′=La3+. This revised version was published online in July 2006 with corrections to the Cover Date.     

Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate

We joined aluminum alloy A5052 to cold-rolled steel SPCC (Steel Plate Cold Commercial) and austenitic stainless steel SUS304 using resistance spot welding with a cover plate. The interfacial microstructure was observed using transmission electron microscopy. A thick two-layered reaction layer contains Fe₂Al₅ and FeAl₃ and a thin serration reaction layer contains Fe₂Al₅ and FeAl₃ were observed at the A5052/SPCC and A5052/SUS304 interface, respectively. Mechanical property analysis suggested that the reaction layer has no effect on the tensile shear strength of the A5052/SUS304 joint and that the tensile shear strength of the A5052/SPCC joint is influenced by the reaction layer formed at its interface.     

Towards a local learning (innovation) model of solar photovoltaic deployment

It is by now familiar that in the deployment of solar photovoltaic (PV) systems, the cost dynamics of major system component like solar cell/module is subjected to experience curve effects driven by production learning and research and development at the supplier side. What is less clear, however, is the economics of system integration or system deployment that takes place locally close to the user, involving other market players, in the downstream solar PV value chain. Experts have agreed that suppliers of solar PV system must customize their flexible characteristics to address local unique users’ and applications requirements and compete on price/performance basis. A lack of understanding of the drivers of the economics of system customization therefore is a deficiency in our understanding of the overall economics of this renewable energy technology option.     

Advanced energy saving in the reaction section of the hydro-desulfurization process with self-heat recuperation technology

The reaction section of the naphtha hydro-desulfurization (HDS) process is a heating and cooling thermal process consisting of a feed/effluent heat exchanger and a fired heater. Energy savings are fundamentally made as a result of the maximized heat recovery in the heat exchanger and the reduced heat duty of the fired heater. To achieve further energy saving in the process, “self-heat recuperation technology” (SHRT) was adopted. In this technology, a compressor was introduced. The suction side of the compressor needed a lower pressure and the feed stream evaporated much easily. The discharged side of the compressor satisfied the operating conditions of both pressure and temperature at the inlet of the reactor. And the reactor effluent stream was able to be used completely to preheat and vaporize the feed stream. All the heat in the process stream was re-circulated without using a fired heater. SHRT was applied to the naphtha HDS process of 18,000 barrel per stream day (BPSD) in the refinery and the mass and energy balance of the process was calculated using commercially available simulation software, Invensys PROII version 8.1. This process-simulation case study confirmed that despite there being no more energy saving potential in the conventional process that makes use of a fired heater, the advanced process with SHRT can reduce the energy consumption significantly by using the recuperated heat of the feed stream.     

An innovative modularity of heat circulation for fractional distillation

A novel modularity of heat circulation for distillation process, which reduces the energy consumption, is proposed. By incorporating compressors and heat exchangers, the heat of the distillate is recuperated and exchanged with the heat of the feed streams. The proposed technology achieves the reduction in the required energy more than 75% as compared with a benchmark process which uses external heat source for heating. This shows the proposed modularity of heat circulation for distillation process is very promising technology to drastically reduce energy demand for distillation.     

Solidification behaviour of calcium carbonate via aragonite-calcite wet transformation with hydrothermal hot pressing

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

Bearing failure in plain woven C_C composites

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.