Single‐Step Deposition of Au‐ and Pt‐Nanoparticle‐Functionalized Tungsten Oxide Nanoneedles Synthesized Via Aerosol‐Assisted CVD,and Used for Fabrication of Selective Gas Microsensor Arrays

Tungsten oxide nanostructures functionalized with gold or platinum NPs are synthesized and integrated, using a single‐step method via aerosol‐assisted chemical vapour deposition, onto micro‐electromechanical system (MEMS)‐based gas‐sensor platforms. This co‐deposition method is demonstrated to be an effective route to incorporate metal nanoparticles (NP) or combinations of metal NPs into nanostructured materials, resulting in an attractive way of tuning functionality in metal oxides (MOX). The results show variations in electronic and sensing properties of tungsten oxide according to the metal NPs introduced, which are used to discriminate effectively analytes (C₂H₅OH, H₂, and CO) that are present in proton‐exchange fuel cells. Improved sensing characteristics, in particular to H₂, are observed at 250 °C with Pt‐functionalized tungsten oxide films, whereas non‐functionalized tungsten oxide films show responses to low concentrations of CO at low temperatures. Differences in the sensing characteristics of these films are attributed to the different reactivities of metal NPs (Au and Pt), and to the degree of electronic interaction at the MOX/metal NP interface. The method presented in this work has advantages over other methods of integrating nanomaterials and devices, of having fewer processing steps, relatively low processing temperature, and no requirement for substrate pre‐treatment.     

Modelling methodology for thermal analysis of hot solder dip process

The shift of electronics industry towards the use of lead-free solders in components manufacturing brought also the challenge of addressing the problem of tin whiskers. Manufacturers of high reliability and safety critical equipment in sectors such as defence and aerospace rely increasingly on the use of commercial-of-the-shelf (COTS) electronic components for their products and systems. The use of COTS components with lead-free solder plated terminations comes with the risks for their long term reliability associated with tin whisker growth related failures. In the case of leaded type electronic components such as Quad Flat Package (QFP) and Small Outline Package (SOP), one of the promising solutions to this problem is to “re-finish” the package terminations by replacing the lead-free solder coatings on the leads with conventional tin–lead solder. This involves subjecting the electronic components to a post-manufacturing process known as Hot Solder Dip (HSD). One of the main concerns for adopting HSD (refinishing) as a strategy to the tin whisker problem is the potential risk for thermally induced damage in the components when subjected to this process.     

Analysis of Heuristic Graph Partitioning Methods for the Assignment of Packet Control Units in GERAN

Over the last few years, graph partitioning has been recognized as a suitable technique for optimizing cellular network structure. For example, in a recent paper, the authors proposed a classical graph partitioning algorithm to optimize the assignment of cells to Packet Control Units (PCUs) in GSM-EDGE Radio Access Network. Based on this approach, the quality of packet data services in a live environment was increased by reducing the number of cell re-selections between different PCUs. To learn more about the potential of graph partitioning in cellular networks, in this paper, a more sophisticated, yet computationally efficient, partitioning algorithm is proposed for the same problem. The new method combines multi-level refinement and adaptive multi-start techniques with algorithms to ensure the connectivity between cells under the same PCU. Performance assessment is based on an extensive set of graphs constructed with data taken from a live network. During the tests, the new method is compared with classical graph partitioning approaches. Results show that the proposed method outperforms classical approaches in terms of solution quality at the expense of a slight increase in computing time, while providing solutions that are easier to check by the network operator.     

FPGA使XAUI和InfiniBand设计更容易

InfiniBand接口是旨在满足新兴的微处理器通信要求新协议中的一种。尽管目前最流行的互连结构仍是做为现业界标准的外围设备互连(PCI)总线标准,但PCI无法满足不断增长的设备I/O需要。根据目前标准,其66MHz的最大速度(对PCI—X则为133MHz)是相当慢的。而其共享总线架构也带来     

防浪涌芯片不只是控制电流

许多电子系统必须保证不间断的、连续的工作.因此技术员们必须在不关闭电源的情况下向这些"高可用性的"系统中添加新的板卡,或者更换其中报废的及受损的板卡.不过,将板卡从通电的底板抽出,或者插入底板,都会带来问题.底板从本质上来说,往往等效于在板卡边缘连接器和电源的大容量电容间的大电感.如果通电的板卡与周围断开时,底板中会出现环振和高压尖峰.例如,在一个-48V的分布式系统中,拔走一块带电板卡会产生足以损伤连接器接触点的电弧.更糟糕的是,当插入新板卡、电压线刚一接触时,对板卡的大容量电容进行充电的、极大的底板电流会在周围电路上产生有害的瞬态浪涌.     

Upconverting Nanoparticle Relays for Resonance Energy Transfer Networks

Networks of fluorophores arranged at the nanoscale can perform basic computation using resonance energy transfer (RET) to transport and manipulate information in the form of excitons. As excitons travel through RET circuits, they are red‐shifted due to vibrational energy loss at each transfer event. This loss prohibits RET circuits from being cascaded to form larger, more computationally complex systems. To address this issue, a nanoassembly capable of converting three or more low energy excitons into a single high energy exciton is designed and fabricated. Deemed the RET relay, this device uses upconverting nanoparticles to achieve anti‐Stokes energy transfer from near‐infrared excited fluorophores to visibly excited fluorophores. In this work, the relay is explored by first breaking it into its halves. Each fluorophore's ability to donate energy to or from the nanoparticle is characterized by a series of photoluminescence experiments. The adsorption of these fluorophores to the particle is modeled as a Langmuir process, revealing the fractional occupancy of each dye that optimizes energy transfer. A fully functional relay is then demonstrated by exciting the near‐infrared dye and extracting the visible dye's fluorescence. Lastly, the performance of the entire construct is optimized over a small sampling of assembly reaction coordinates.     

A High Throughput Configurable SDR Detector for Multi-user MIMO Wireless Systems

Spatial division multiplexing (SDM) in MIMO technology significantly increases the spectral efficiency, and hence capacity, of a wireless communication system: it is a core component of the next generation wireless systems, e.g. WiMAX, 3GPP LTE and other OFDM-based communication schemes. Moreover, spatial division multiple access (SDMA) is one of the widely used techniques for sharing the wireless medium between different mobile devices. Sphere detection is a prominent method of simplifying the detection complexity in both SDM and SDMA systems while maintaining BER performance comparable with the optimum maximum-likelihood (ML) detection. On the other hand, with different standards supporting different system parameters, it is crucial for both base station and handset devices to be configurable and seamlessly switch between different modes without the need for separate dedicated hardware units. This challenge emphasizes the need for SDR designs that target the handset devices. In this paper, we propose the architecture and FPGA realization of a configurable sort-free sphere detector, Flex-Sphere, that supports 4, 16, 64-QAM modulations as well as a combination of 2, 3 and 4 antenna/user configuration for handsets. The detector provides a data rate of up to 857.1 Mbps that fits well within the requirements of any of the next generation wireless standards. The algorithmic optimizations employed to produce an FPGA friendly realization are discussed.     

Voltage refinement by deficit HOLZ line geometry

A method of refining electron beam voltage from deficit line intersections, using a quasi-kinematic scattering approximation, is described and applied to a silicon standard. It is shown that dynamical corrections are necessary for higher-index zone axes, such as 310 and 411, where a single deficit line associated with one dominant Bloch state is visible. This leads to a substantial difference in the refined voltage compared with that obtained from a purely kinematic approximation. Neglect of this dynamical correction term effectively invokes a systematic error that may lead to high precision but poor accuracy in higher-order Laue zone measurements of beam voltage or lattice parameters. Although relatively small, differences in the dynamical correction necessary for these two zones are confirmed experimentally for 100-300 keV electrons.     

On the Development of Analogue Sampled-Data Signal Processing

This paper provides a historical perspective on thedevelopment of analogue sampled-data signal processing circuitsand systems. The evolution, role and current trends in the developmentof analogue sampled-data signal processing systems is surveyed.Firstly, the evolution of integrated circuit based techniques,culminating in the ubiquitous switched-capacitor technique istraced. Then the role that analogue sampled-data systems playwithin the context of a general information processing environmentis examined and the required characteristics are identified.Trends in silicon integrated circuit processing technology aresummarised and their impact on sampled analogue circuits areidentified. Finally, the application of analogue current-modetechniques, and in particular switched-currents, to overcomesome of the limitations of previous voltage based approaches,is discussed.     

iPhone出奇“智”胜系列——爱疯又爱聊

在这新新人类的社会里,人人都喜爱在网络中聊天,不管是与同学胡乱调侃、与另一半传达爱意,还是与同事召开网络会议。生活中,我们都离不开它。在家聊天可以靠电脑,但是出门在外,想聊个QQ或是MSN的话,该怎么办呢？这时候“爱疯”的“疯子”肯定会说“用iPhone嘛!”没错,iPhone作为以服务和程序为重点的手机产品,相关的聊天工具怎么可能会少呢？