Thermal stability of polymers based on acrylamide and 2-acrylamido-2-methylpropane sulfonic acid in different temperature and salinity conditions

Partially hydrolyzed polyacrylamide (PHPA) is the most widely used polymer in enhanced oil recovery (EOR) applications. However, under conditions of high temperature and salinity, the PHPA molecules become hydrolyzed, causing a drastic reduction of the viscosity of the polymer solution due to the presence of negative charges, making the molecules more susceptible to interactions with cations. In this sense, in order to increase the stability of these polymers, an anionic monomer more resistant to cations such as 2-acrylamido-2-methylpropane sulfonic acid (AMPS) has been incorporated into the HPAM molecules. This work evaluated the thermal stability of a copolymer (acrylamide and AMPS - AN125) and a terpolymer (acrylamide, acrylate, and AMPS-FP5115) in the time course of 360 days. The tests were carried out in typical conditions of Brazilian offshore reservoirs, such as absence of oxygen, high temperature, and high salt concentration. The test method involved measurements of intrinsic viscosity in function of time and determination of the hydrolysis degree of the polymers by elemental analysis. The copolymer AN125 was more stable under the test conditions than the terpolymer FP 5115 due to the presence of a higher concentration of AMPS in the copolymer. The AMPS group was hydrolyzed to AA at a temperature of 100 °C, however, the increase in salt concentration delayed the onset of this degradation. The tests indicated that the presence of a higher AMPS content in the copolymer does not prevent the polymer from undergoing hydrolysis, but delays the polymer precipitation step in the solution.     

Microwave-Assisted Synthesis of Phenothiazine and Quinoline Derivatives

Application of a dynamic microwave power system in the chemical synthesis of some phenothiazine and quinoline derivatives is described. Heterocyclic ring formation, aromatic nucleophilic substitution and heterocyclic aldehydes/ketones condensation reactions were performed on solid support, or under solvent free reaction conditions. The microwave-assisted Duff formylation of phenothiazine was achieved. Comparison of microwave-assisted synthesis with the conventional synthetic methods demonstrates advantages related to shorter reaction times and in some cases better reaction yields.     

Peptide Bioconjugates of Electron‐Poor Metallocenes: Synthesis,Characterization, and Anti‐Proliferative Activity

We report the synthesis of metallocene compounds Cp₂M with two different electron‐withdrawing substituents on both cyclopentadienyl rings (hexafluoroacetone (HFA) and chlorobenzoyl ( 1 – 5 ); HFA and COOH ( 6 and 7 ), M=Fe or Ru). The COOH‐containing derivatives were used to synthesize peptide bioconjugates with enkephalin ( 8 and 9 ) and neurotensin ( 10 and 11 ) as well as fluorescein‐labeled neurotensin ( 12 ). All the molecules were fully characterized, including X‐ray structures for 6 and 7 . The physicochemical properties (lipophilicity and electrochemistry) and cytotoxicity on MCF‐7, HT‐29, and PT‐45 cancer cells were evaluated for selected compounds. Electrochemical investigation by cyclic voltammetry revealed that all bis‐substituted metallocenes are up to 300 mV harder to oxidize compared to the monosubstituted 2‐ferrocenylhexafluoropropan‐2‐ol (FcHFA: Δ${E{{{\rm f}\hfill \atop 0\hfill}}}$ =214 mV; disubstituted derivatives: up to Δ${E{{{\rm f}\hfill \atop 0\hfill}}}$ =512 mV; both vs. FcH^0/+). For the bis‐substituted compounds, log P determinations by RP‐HPLC showed increased lipophilicity in comparison to the monosubstituted FcHFA and RcHFA. Cellular uptake was investigated by fluorescence microcopy, and this revealed endosomal entrapment for 12 .     

Binding Mode and Structure–Activity Relationships around Direct Inhibitors of the Nrf2–Keap1 Complex

An X‐ray crystal structure of Kelch‐like ECH‐associated protein (Keap1) co‐crystallised with (1S,2R)‐2‐[(1S)‐1‐[(1,3‐dioxo‐2,3‐dihydro‐1H‐isoindol‐2‐yl)methyl]‐1,2,3,4‐tetrahydroisoquinolin‐2‐carbonyl]cyclohexane‐1‐carboxylic acid (compound (S,R,S)‐ 1 a ) was obtained. This X‐ray crystal structure provides breakthrough experimental evidence for the true binding mode of the hit compound (S,R,S)‐ 1 a , as the ligand orientation was found to differ from that of the initial docking model, which was available at the start of the project. Crystallographic elucidation of this binding mode helped to focus and drive the drug design process more effectively and efficiently.     

Three-dimensional segmentation and growth-rate estimation of small pulmonary nodules in helical CT images

Small pulmonary nodules are a common radiographic finding that presents an important diagnostic challenge in contemporary medicine. While pulmonary nodules are the major radiographic indicator of lung cancer, they may also be signs of a variety of benign conditions. Measurement of nodule growth rate over time has been shown to be the most promising tool in distinguishing malignant from nonmalignant pulmonary nodules. In this paper, we describe three-dimensional (3-D) methods for the segmentation, analysis, and characterization of small pulmonary nodules imaged using computed tomography (CT). Methods for the isotropic resampling of anisotropic CT data are discussed. 3-D intensity and morphology-based segmentation algorithms are discussed for several classes of nodules. New models and methods for volumetric growth characterization based on longitudinal CT studies are developed. The results of segmentation and growth characterization methods based on in vivo studies are described. The methods presented are promising in their ability to distinguish malignant from nonmalignant pulmonary nodules and represent the first such system in clinical use.     

Habitat fragmentation has interactive effects on the population genetic diversity and individual behaviour of a freshwater salmonid fish

Sufficient genetic diversity can aid populations to persist in dynamic and fragmented environments. Understanding which mechanisms regulate genetic diversity of riverine fish can therefore advance current conservation strategies. The aim of this study was to investigate how habitat fragmentation interacted with population genetic diversity and individual behaviour of freshwater fish in large river systems. We studied a population of the long‐distance migratory, iteroparous freshwater salmonid European grayling (Thymallus thymallus) in south‐eastern Norway. Genotyping (n = 527) and radio‐tracking (n = 54) of adult fish throughout a 169‐km river section revealed three major migration barriers limiting gene flow and depleting genetic diversity upstream. Individuals from upstream areas that had dispersed downstream of barriers showed different movement behaviour than local genotypes. No natal philopatry was found in a large unfragmented river section, in contrast to strong fidelity to spawning tributaries known for individuals overwintering in lakes. We conclude that (a) upstream sub‐populations in fragmented rivers show less genetic variation, making it less likely for them to adapt to environmental changes; (b) fish with distinct genotypes in the same habitat can differ in their behaviour; (c) spawning site selection (natal philopatry) can differ between fish of the same species living in different habitats. Together this implies that habitat loss and fragmentation may differently affect individual fish of the same species if they live in different types or sections of habitat. Studying behaviour and genetic diversity of fish can unravel their complex ecology and help minimize human impact.     

Root Exposure to 5-Aminolevulinic Acid (ALA) Affects Leaf Element Accumulation,Isoprene Emission,Phytohormonal Balance,and Photosynthesis of Salt-Stressed Arundo donax

Arundo donax has been recognized as a promising crop for biomass production on marginal lands due to its superior productivity and stress tolerance. However, salt stress negatively impacts A. donax growth and photosynthesis. In this study, we tested whether the tolerance of A. donax to salinity stress can be enhanced by the addition of 5-aminolevulinic acid (ALA), a known promoter of plant growth and abiotic stress tolerance. Our results indicated that root exposure to ALA increased the ALA levels in leaves along the A. donax plant profile. ALA enhanced Na⁺ accumulation in the roots of salt-stressed plants and, at the same time, lowered Na⁺ concentration in leaves, while a reduced callose amount was found in the root tissue. ALA also improved the photosynthetic performance of salt-stressed apical leaves by stimulating stomatal opening and preventing an increase in the ratio between abscisic acid (ABA) and indol-3-acetic acid (IAA), without affecting leaf methanol emission and plant growth. Supply of ALA to the roots reduced isoprene fluxes from leaves of non-stressed plants, while it sustained isoprene fluxes along the profile of salt-stressed A. donax. Thus, ALA likely interacted with the methylerythritol 4-phosphate (MEP) pathway and modulate the synthesis of either ABA or isoprene under stressful conditions. Overall, our study highlights the effectiveness of ALA supply through soil fertirrigation in preserving the young apical developing leaves from the detrimental effects of salt stress, thus helping of A. donax to cope with salinity and favoring the recovery of the whole plant once the stress is removed.     

Efficiency of 4,4′‐bis(N,N‐diethylamino) benzophenone for the polymerization of dimethacrylate resins in thick sections

The efficiency of 4,4′‐bis(N,N‐diethylamino)benzophenone (DEABP) for the polymerization of dimethacrylate monomers in thick sections ( 1 – 2 mm) was studied. DEABP (λ_max = 365 nm) represents a complete initiating system as it contains both ketone and amine functional groups. During irradiation, DEABP photobleaches at a fast rate causing deeper penetration of light through the underlying layers, but the photoinitiation efficiency (rate of polymerization per photon absorption rate) is relatively poor. As a result, irradiation of methacrylate monomers at 365 nm results in a slow average polymerization rate and a reduced monomer conversion for thick sections due to the light attenuation caused by the high absorptivity of DEABP and photolysis products. These results highlight the inherent interlinking of light attenuation and photobleaching rate in polymerization of thick sections. Copyright © 2011 Society of Chemical Industry     

Microstructure models for cellular materials

Laguerre tessellations generated by random sphere packings are promising models for the microstructure of cellular or polycrystalline materials. In this paper, the case of hard sphere packings with lognormal or gamma distributed volumes is investigated. The dependence of the geometric characteristics of the Laguerre cells on the volume fraction of the sphere packing and the coefficient of variation of the volume distribution is studied in detail. The moments of certain cell characteristics are described by polynomials, which allows to fit tessellation models to real materials without further simulations. The procedure is demonstrated by the examples of open polymer and aluminium foams.     

Injection molding of products with functional surfaces by micro-structured, PVD coated injection molds

Molding of micro structures by injection molding leads to special requirements for the molds e.g. regarding wear resistance and low release forces of the molded components. At the same time it is not allowed to affect the replication precision. Physical vapor deposition (PVD) is one of the promising technologies for applying coatings with adapted properties like high hardness, low roughness, low Young’s modulus and less adhesion to the melt of polymers. Physical vapor deposition technology allows the deposition of thin films on micro structures. Therefore, the influence of these PVD layers on the contour accuracy of the replicated micro structures has to be investigated. For this purpose injection mold inserts were laser structured with micro structures of different sizes and afterwards coated with two different coatings, which were deposited by a magnetron sputter ion plating PVD technology. After deposition, the coatings were analyzed by techniques regarding hardness, Young’s modulus and morphology. The geometries of the micro structures were analyzed by scanning electron microscopy before and after coating. Afterwards, the coated mold inserts were used for injection molding experiments. During the injection molding process, a conventional and a variothermal temperature control of the molds were used. The molded parts were analyzed regarding roughness, structure height and structure width by means of laser microscopy.