Static and Dynamic Spins in Superconducting La2−x Sr x CuO4: The Risø Years

One important area of modern condensed matter research is the investigation of the nature of the superconducting cuprates. Much progress in this field has been obtained with the technique of neutron scattering. We here present a review of neutron scattering studies of the high-temperature superconductor La_2?xSr_xCuO₄, performed at Risø National Laboratory. We review the work on the mapping of the incommensurate spin fluctuations, the investigation of the gap in the fluctuation spectrum, the magnetic properties of the vortices appearing in an applied field, and the quantum critical behaviour of the system. We discuss our findings in the light of results of neutron scattering from other groups, on other cuprate systems, and results from other experimental methods, e.g. NMR, μSR, STM, X-ray diffraction, and ARPES. We end with a discussion on the implications of the experimental results for the progress in the general understanding of high-temperature superconductivity. PACS numbers: 61.12.Ex, 74.20.Mn, 74.72.Dn, 75.25.+z, 78.70.Nx.     

Economic Model to Optimize Underground Utility Protection

The need for better protecting our vital infrastructure from being damaged or destroyed has received increased attention since the terrorist attacks on September 11, 2001. The tragedy of having thousands of innocent people die before the eyes of an entire nation awakened people to the reality of “managed” attacks of unthinkable magnitudes. However, tragedies of a smaller scale are a daily occurrence but accepted as “collateral damage” of work in an unsafe environment. This paper presents a cost-benefit analysis to address the question of how much money should be spent in protecting underground utilities from damage. During the study of an actual incident it was found that the total costs of such accidents are vastly underreported because only costs for emergency responses and repair are tallied up. This paper makes the case that a comprehensive approach for assessing the total economic impact of such incidents on the public, business, and government is the critical stepping stone to a mathematical optimization of expenditure for damage prevention. In addition, the reader will quickly realize that the use of the presented optimization model provides theoretical underpinning for the engineering profession in its effort to better protect our critical infrastructure from terrorist attacks.     

Theory of Switched RF Resonators

Transient characteristics of switched resonators have been studied. The resonators exhibit controllable impedance and energy storage behaviors during an alternating charging and discharging process. It is discovered that these unique characteristics of switched resonators can lead to novel RF envelope signal processing functions. The paper discusses the basic theory of switched resonators and the designing methodology of relevant RF signal processing applications. Two applications are presented as examples. The first example is a variable, reflective attenuator which uses the controllable impedance of the switched resonators to achieve different attenuation/reflection levels. In the second example, a simple, compact and efficient RF pulse compression technique based on the switched resonator concept is introduced. It utilizes the charging/discharging characteristics of the circuit resonator by varying the resonator's Q-factor. The approach compresses the duration of the modulated pulse without changing the phase characteristics of the RF carrier. The pulse compression technique can also be implemented with other type of resonators including distributed resonators, as demonstrated through the experiments     

Functional grading of rubber tubes within the context of a molecularly inspired finite thermoelastic model

Summary. The concept of functional grading is applied to rubber-like materials within the framework of finite thermoelasticity. A phenomenological stress-strain relation is proposed to account for the finite chain extensibility, the entropic origin for the stress, as well as the graded nature of rubbers. As an application, the azimuthal shearing of a hollow rubber tube subjected to thermal loading is considered with a view toward minimizing the strain inhomogeneity, and an optimum grading for each temperature gradient is presented.     

Effect of organic dopants on electrodeposition and characteristics of polyaniline under the varying influence of H2SO4 and HClO4 electrolyte media

Electrodeposition of conducting polyaniline (Pani) was made under potentiostatic condition at pH 1.0 in different electrolyte media (H₂SO₄ and HClO₄) in the absence and presence of two organic dopants, disodium salts of naphthalene-1,5-disulphonic acid (NSA) and of catechol-3,5-disulphonic acid (CSA). The rate and yield of Pani deposition were dependent on the acid medium and the dopant employed. NSA in H₂SO₄ caused an increase in rate and yield but CSA decrease when compared to the rate and yield of H₂SO₄ alone. In HClO₄ medium, both the dopants showed a decrease. With regard to DC electrical conductivity, both the dopants exhibited an enhancement in H₂SO₄ medium but NSA a decline in HClO₄. Characterisation of the electrosynthesised polymer samples by various instrumental techniques (cyclic voltammetric: CV, FTIR, UV-Visible: UV-Vis, EPR, XRD, TGA and DTG methods) revealed that between the two acid media, H₂SO₄ was the better one. Further, it enlightened the role of two organic dopants in relation to the acid media. The advantageous role of NSA in H₂SO₄ had origin on its molecular characteristics such as non-polarity, larger π-electron cloud etc., while CSA could not perform such a role because of its easily oxidisable hydroxyl groups. In HClO₄, however, both the dopants could play only an unfavourable role owing to its greater polarity and oxidizing power than H₂SO₄.     

Determination of the Coordinates of the Center of a Gaussian Beam by Means of a Matrix Photodetector Using a Weighting Method

A weighting algorithm to determine the coordinates of the center of a Gaussian laser beam projected onto a matrix photodetector is considered. The influence of the internal noise of the photodetector, the maximum brightness of the signal at the beam maximum, and the beam radius on the precision of the algorithm is investigated. Recommendations on image processing are presented.     

Layout-Specific Circuit Evaluation in 3-D Integrated Circuits

In this paper, we describe a comprehensive layout methodology for bonded three-dimensional integrated circuits (3D ICs). In bonded 3D integration technology, parts of a circuit are fabricated on different wafers, and then, the wafers are bonded with a glue layer of Cu or polymer based adhesive. Using our layout methodology, designers can layout such 3D circuits with necessary information on inter-wafer via/contact and orientation of each wafer embedded in the layout. We have implemented the layout methodology in 3DMagic. Availability of 3DMagic has led to interesting research with a wide range of layout-specific circuit evaluation, from performance comparison of 2D and 3D circuits to layout-specific reliability analyses in 3D circuits. Using 3DMagic, researchers have designed and simulated an 8-bit encryption processor mapped into 2D and 3D FPGA layouts. Moreover, the layout methodology is an essential element of our ongoing research for the framework of a novel Reliability Computer Aided Design tool, ERNI-3D.     

Using magnetic coupling to eliminate right half-plane zeros in boost converters

A dynamic analysis of the boost converter with an output filter reveals that magnetic coupling between inductors allows transfer of the zeros to the left half-plane of the control-to-output transfer function. Similar results requiring smaller magnetic components are obtained by combining magnetic coupling with damping of the output filter. The analysis is based on the application of the Routh-Hurtwitz's criterion to the numerator of the transfer function in order to derive the design conditions for the converter parameters. A design example illustrates the procedure, and experimental results verify the theoretical predictions. The application of these techniques will allow the design of high efficiency voltage boost-based regulators with dynamic behavior similar to buck-derived structures.     

Extending the color gamut and dynamic range of an sRGB image using a residual image

Image sources, such as digital camera captures and photographic negatives, typically have more information than can be reproduced on a photographic print or a video display. The information that is lost during the tone/color rendering process relates to both the extended dynamic range and color gamut of the original scene. In conventional photographic systems, most of this additional information is archived on the photographic negative and can be accessed by adjusting the way the negative is printed. However, most digital imaging systems have traditionally archived only a rendered video RGB image. As a result, it is not possible to make the same sorts of image manipulations that historically have been possible with conventional photographic systems. This suggests that there would be an advantage to storing images using an extended dynamic range/color gamut color encoding. However, because of file compatibility issues, digital imaging systems that store images using color encoding other than a standard video RGB representation (e.g., sRGB) would be significantly disadvantaged in the marketplace. In this article, we describe a solution that has been developed to maintain compatibility with existing file formats and software applications, while simultaneously retaining the extended dynamic range and color gamut information associated with the original scenes. With this approach, the input raw digital camera image or film scan is first transformed to the scene‐referred ERIMM RGB color encoding. Next, a rendered sRGB image is formed in the usual way and stored in a conventional image file (e.g., a standard JPEG file). A residual image representing the difference between the original extended dynamic range image and the final rendered image is formed and stored in the image file using proprietary metadata tags. This provides a mechanism for archiving the extended dynamic range/color gamut information, which is normally discarded during the rendering process, without sacrificing interoperability. Appropriately enabled applications can decode the residual image metadata and use it to reconstruct the ERIMM RGB image, whereas applications that are not aware of the metadata will ignore it and only have access to the sRGB image. The residual image is formed such that it will have negligible pixel values for those portions of the image that lie within the sRGB gamut, and will therefore be highly compressible. Tests on a population of 950 real customer images have demonstrated that the extended dynamic range scene information can be stored with an average file size overhead of about 8% compared to the sRGB images alone. © 2003 Wiley Periodicals, Inc. Col Res Appl, 28, 251–266, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10160     

Ideally selective diisocyanate building blocks: New perspectives for dendrimers and coating binders

Using zirconium (IV) salts as catalyst, the reaction of a diisocyanate carrying one tertiary and one primary isocyanate group (IMCI, DIMP) with alcohols can be conducted with complete regioselectivity. This unique selectivity enables the use of a diisocyanate building block in unprecedented ways. Incomplete regioselectivity of diisocyanates, as commonly encountered in currently commercial ones like IPDI and TDI, inevitably leads to polydisperse products in reaction with polyols. The ultimate monodisperse polymer architecture, dendrimers, can now be made in a facile, straightforward manner using IMCI as the ideal diisocyanate building block. Coating applications of this unique building block are not restricted to these perfect branching polymers, but also include isocyanate-functional coating resins. Without any increase in polydispersity, a hydroxyl-functional polyester can be end-capped with the IMCI diisocyanate and subsequently serve as a crosslinker in powder coatings.