Artificial neural networks for coordination and control: The portability of experiential representations

It is time to locate connectionist representation theory in the new wave of robotics research. The utility of representations developed in artificial neural networks (ANNs) during learning has been demonstrated in cognitive science research since the 1980s. The research reported here puts learned representations to work in a decentered control task, the disembodied arm problem, in which a mobile robot operates an arm fixed to a table to pick up objects. There is no physical linkage between the arm and the robot and so the robot's point of view must be decentered. This is done by developing a modular Artificial Neural Net system in three stages: (i) a classifier net is trained with laser scan data to output transformationally invariant position classes; (ii) an arm net is trained for picking up objects; (iii) an inter net is trained to communicate and coordinate the sensing and acting. The completed system is shown to create new nonsymbolic transformationally invariant representations in order to perform the effective generalization of decentered viewpoints.     

Effect of hygiene measures, water sanitation and oral rehydration therapy on diarrhea in children less than five years old in the south of Ivory Coast

BACKGROUND: Gastric sucrose permeability is a noninvasive marker that reliably increases in association with gastrointestinal injury due to use of nonsteroidal antiinflammatory drugs. Despite the effect of Helicobacter pylori infection on the gastric mucosa, in a previous study we were unable to demonstrate that H. pylori infection was associated with abnormal gastric sucrose permeability. Our goal in this study was to explore further whether H. pylori infection changed gastric permeability; therefore, we evaluated the effect of treatment of H. pylori infection on gastric permeability to sucrose and the relation of sucrose permeability to density of polymorphonuclear leukocytes. MATERIALS AND METHODS: Five hundred milliliters of a solution containing 100 gm of sucrose was ingested by the subject at bedtime. Overnight urine was collected and assayed for sucrose by high-performance liquid chromatography. Sucrose permeability was assessed both before and approximately 4 weeks after anti-H. pylori therapy. RESULTS: Seventeen asymptomatic H. pylori-infected volunteers participated; 8 were cured. Sucrose permeability was in the range commonly found in normal controls both before and after anti-H. pylori therapy (mean excretion, 76.3 mg; range, 13-171 mg). Gastric sucrose permeability correlated with the density of polymorphonulcear cell infiltration of the mucosa. Cure of the H. pylori infection was associated with a small but significant decrease in sucrose permeability (98.8 +/- 18 mg to 51.7 +/- 9.8 mg (p = .01). Sucrose permeability was greater in those with a high density of mucosal polymorphonuclear cells compared to those with lower scores (119.5 +/- 4 vs 71.4 +/- 13 for those with scores > or = 5 compared to scores < or = 4; p = .023). Failed therapy resulted in an increase in the mucosal density of polymorphonuclear infiltration and sucrose permeability (56.4 +/- 13 mg-99.7 +/- 19 mg pretreatment vs posttreatment, respectively; p = .031). CONCLUSION: H. pylori gastritis causes a small but measurable increase in gastric permeability to sucrose that may reflect epithelial transmigration of neutrophils.     

Magnet Safety Assessment for ITER

The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.     

Positive temperature dependence of the electron impact ionizationcoefficient in In0.53Ga0.47As/InP HBTs

Impact ionization is a major limiting factor to the maximum operating voltage of InGaAs-based, high-speed transistors. In this work, data on the positive temperature dependence of the electron impact ionization coefficient α_n in In_0.53Ga_0.47As at medium-low electric fields are reported for the first time. The increase of α_n with temperature is opposite to the behavior normally observed in most semiconductors. This anomalous behavior implies the onset of a positive feedback between power dissipation and avalanche generation which may adversely affect the power handling capability of In_0.53Ga _0.47As-based devices, and which should be taken into account in device thermal modeling. In the experimental procedure, based on the measurement of the multiplication factor M-1 in npn In_0.53Ga _0.47As/InP Heterojunction Bipolar Transistors (HBT), particular care has been taken in order to rule out possible spurious, temperature-dependent contributions to the measured multiplication current     

A fully soft-switched extended-period quasi-resonantpower-factor-correction circuit

This paper presents the design criteria, procedure, and implementation of a soft-switched power-factor-correction (PFC) circuit based on the extended-period quasi-resonant (EPQR) principles. All power electronic devices including switches and diodes in the circuit are fully soft switched. The design method is demonstrated in a prototype circuit. The operating principles are confirmed with computer simulation and experimental results. A comparison of the EP-QR operation and zero-voltage-transition (ZVT) pulse-width modulation (PWM) method     

Densification involved in the UV-based photosensitivity of silicaglasses and optical fibers

A comprehensive survey of photosensitivity in silica glasses and optical fiber is reviewed. Recent work on understanding the mechanisms contributing to germanium or aluminum doped fiber photosensitivity is discussed within the framework of photoelastic densification models     

Soft commutation in capacitive idling converters

The capacitive idling converters derived from the Cuk, SEPIC, Zeta, and flyback topologies allow soft commutation of power switches without the need for additional circuitry, making it possible to increase the switching frequency while maintaining high efficiency     

E-kernel: an embedding kernel on the IBM victor V256 multiprocessorfor program mapping and network reconfiguration

We present the design of E-kernel, an embedding kernel on the Victor V256 message-passing partitionable multiprocessor, developed for the support of program mapping and network reconfiguration. E-kernel supports the embedding of a new network topology onto Victor's 2D mesh and also the embedding of a task graph onto the 2D mesh network or the reconfigured network. In the current implementation, the reconfigured network can be a line or an even-size ring, and the task graphs meshes or tori of a variety of dimensions and shapes or graphs with similar topologies. For application programs having these task graph topologies and that are designed according to the communication model of E-kernel, they can be run without any change on partitions connected by the 2D mesh, line, or ring. Further, E-kernel attempts the communication optimization of these programs on the different networks automatically, thus making both the network topology and the communication optimization attempt completely transparent to the application programs. Many of the embeddings used in E-kernel are optimal or asymptotically optimal (with respect to minimum dilation cost). The implementation of E-kernel translated some of the many theoretical results in graph embeddings into practical tools for program mapping and network reconfiguration in a parallel system. E-kernel is functional on Victor V256. Measurements of E-kernel's performance on V256 are also included     

Algebra of algorithms and Kaluzhnin's graphschemas

This research was supported under project No. 6.02.02/128-93 as part of the state scientific-technical program on future information technologies and systems by the Ukrainian State Committee, of Science and Technology.