Playing on a holo-stage: towards the interaction between real and virtual performers

This paper presents a number of ongoing projects that will be valuable to the development of technologies for digital theatre and performance. This paper describes an EU ACTS project called RESOLV which develops an integrated system to capture real 3D environments using laser and video. Current research on motion tracking, statistical behaviour modelling and simulation is presented, and possible applications, both for visual augmentation and audio generation, are discussed. The projects presented were not originally designed in the domain of theatre and performance, however their results and output seem to be well suited to be applied in this area.     

VFC-SMOTE: very fast continuous synthetic minority oversampling for evolving data streams

Data Mining and Knowledge Discovery - The world is constantly changing, and so are the massive amount of data produced. However, only a few studies deal with online class imbalance learning that...     

α-Alumina and spinel react into single-phase high-alumina spinel in <3 seconds during flash sintering

In situ X-ray diffraction measurements at the Advanced Photon Source show that α-Al₂O₃ and MgAl₂O₄ react nearly instantaneously and completely, and nearly completely to form single-phase high-alumina spinel during voltage-to-current type of flash sintering experiments. The initial sample was constituted from powders of α-Al₂O₃, MgAl₂O₄ spinel, and cubic 8 mol% Y₂O₃-stabilized ZrO₂ (8YSZ) mixed in equal volume fractions, the spinel to alumina molar ratio being 1:1.5. Specimen temperature was measured by thermal expansion of the platinum standard. These measurements correlated well with a black-body radiation model, using appropriate values for the emissivity of the constituents. Temperatures of 1600-1736°C were reached during the flash, which promoted the formation of alumina-rich spinel. In a second set of experiments, the flash was induced in a current-rate method where the current flowing through the specimen is controlled and increased at a constant rate. In these experiments, we observed the formation of two different compositions of spinel, MgO•3Al₂O₃ and MgO•1.5Al₂O₃, which evolved into a single composition of MgO•2.5Al₂O₃ as the current continued to increase. In summary, flash sintering is an expedient way to create single-phase, alumina-rich spinel.     

A methodological approach to fully automated highly accelerated life tests

Microsystem Technologies - Highly accelerated life test (HALT) is a test methodology to evaluate reliability of mechanical and electromechanical devices. HALT is often used on devices that must be...     

Nanoporous microtubes obtained from a Cu-Ni metallic wire

Nanoporous microtubes of a nickel-copper alloy were obtained from a Cu-44Ni-1Mn (wt%) commercial wire (200 μm diameter). A new synthesis method was established through three steps: 1) partial oxidation of the wire at 1173 K in air, 2) removal of the inner unoxidized core by chemical etching, 3) reduction in 10 bar hydrogen atmosphere. During oxidation, the segregation of Cu and Ni occurred because of their different diffusion coefficients in the corresponding oxides. As a consequence, pores were formed by Kirkendall effect and due to selective chemical etching of the different oxides. Additional porosity formed because of volume contraction during reduction with hydrogen. After reduction, the microtube shows a composition gradient from the inner wall (almost pure nickel) to the outer wall (almost pure copper). The process allowed to obtain microtubes with tuneable wall thickness and inner pores around 180 ± 80 nm. The morphological features developed suggest improved capillarity properties for applications in MEMS.     

A distributed command governor based on graph colorability theory

In this paper, a distributed command governor (CG) strategy is introduced that, by the use of graph colorability theory, improves the scalability property and the performance of recently introduced distributed noncooperative sequential CG strategies. The latter are characterized by the fact that only 1 agent at a decision time is allowed to update its command, whereas all the others keep applying their previously computed commands. The scalability of these early CG distributed schemes and their performance are limited because the structure of the constraints is not taken into account in their implementation. Here, by exploiting the idea that agents that are not directly coupled by the constraints can simultaneously update their control actions, the agents in the network are grouped into particular subsets (turns). At each time instant, on the basis of a round‐robin policy, all agents belonging to a turn are allowed to update simultaneously their commands, whereas agents in other turns keep applying their previous commands. Then, a turn‐based distributed CG strategy is proposed and its main properties are analyzed. Graph colorability theory is used to determine the minimal number of turns and to distribute each agent in at least a turn. A novel graph colorability problem that allows one to maximize the frequency at which agents can update their commands is proposed and discussed. A final example is presented to illustrate the effectiveness of the proposed strategy.     

Porcine Small Intestinal Submucosa (SIS) as a Suitable Scaffold for the Creation of a Tissue-Engineered Urinary Conduit: Decellularization,Biomechanical and Biocompatibility Characterization Using New Approaches

Bladder cancer (BC) is among the most common malignancies in the world and a relevant cause of cancer mortality. BC is one of the most frequent causes for bladder removal through radical cystectomy, the gold-standard treatment for localized muscle-invasive and some cases of high-risk, non-muscle-invasive bladder cancer. In order to restore urinary functionality, an autologous intestinal segment has to be used to create a urinary diversion. However, several complications are associated with bowel-tract removal, affecting patients’ quality of life. The present study project aims to develop a bio-engineered material to simplify this surgical procedure, avoiding related surgical complications and improving patients’ quality of life. The main novelty of such a therapeutic approach is the decellularization of a porcine small intestinal submucosa (SIS) conduit to replace the autologous intestinal segment currently used as urinary diversion after radical cystectomy, while avoiding an immune rejection. Here, we performed a preliminary evaluation of this acellular product by developing a novel decellularization process based on an environmentally friendly, mild detergent, i.e., Tergitol, to replace the recently declared toxic Triton X-100. Treatment efficacy was evaluated through histology, DNA, hydroxyproline and elastin quantification, mechanical and insufflation tests, two-photon microscopy, FTIR analysis, and cytocompatibility tests. The optimized decellularization protocol is effective in removing cells, including DNA content, from the porcine SIS, while preserving the integrity of the extracellular matrix despite an increase in stiffness. An effective sterilization protocol was found, and cytocompatibility of treated SIS was demonstrated from day 1 to day 7, during which human fibroblasts were able to increase in number and strongly organize along tissue fibres. Taken together, this in vitro study suggests that SIS is a suitable candidate for use in urinary diversions in place of autologous intestinal segments, considering the optimal results of decellularization and cell proliferation. Further efforts should be undertaken in order to improve SIS conduit patency and impermeability to realize a future viable substitute.     

Comparison of Automated Ribotyping,spa Typing,and MLST in 108 Clinical Isolates of Staphylococcus aureus from Orthopedic Infections

108 isolates of Staphylococcus aureus, belonging to six large ribogroups according to the automated Ribo-Printer^® system, were studied with two highly used molecular methods for epidemiological studies, namely multi-locus sequence typing (MLST) and spa typing, followed by BURP and eBURST v3 analysis for clustering spa types and sequence (ST) types. The aim was to evaluate whether automated ribotyping could be considered a useful screening tool for identifying S. aureus genetic lineages with respect to spa typing and MLST. Clarifying the relationship of riboprinting with these typing methods and establishing whether ribogroups fit single clonal complexes were two main objectives. Further information on the genetic profile of the isolates was obtained from agr typing and the search for the mecA, tst genes, and the IS256 insertion sequence. Automated ribotyping has been shown to predict spa clonal complexes and MLST clonal complexes. The high cost and lower discriminatory power of automated ribotyping compared to spa and MSLT typing could be an obstacle to fine genotyping analyzes, especially when high discriminatory power is required. On the other hand, numerous advantages such as automation, ease and speed of execution, stability, typeability and reproducibility make ribotyping a reliable method to be juxtaposed to gold standard methods.