Comparison of eluted monomer from different indirect and direct resin composites

Indirect resin composites used in indirect restorations have been used as alternative methods to avoid the negative effects of a direct application. The composition and structure of these are similar to a direct composite. Several authors have discussed the elution monomer from resin composites because it is a crucial factor in optimizing the physical properties and biocompatibility of resin composites. The aim of this study was to compare the elution of monomers from different resin composites using high-performance liquid chromatography (HPLC). Indirect composites including Signum, Gradia, and Solidex, and direct composite Filtek Ultimate were used. The samples (2 x 5 mm) were prepared and polymerized for 20 seconds with a light-emitting diode unit. A secondary curing was then applied to the indirect resin composites. After fabrication, each sample was immediately immersed in a 75 wt% ethanol/water solution and analyzed by HPLC. The obtained data were analyzed with one-way ANOVA and Tukey HSD (p < 0.05). Residual monomers were eluted from indirect and direct resin composites and the amount of eluted monomers increased over time. The highest mean concentrations of residual Bis-GMA, UDMA, TEGDMA, and HEMA were detected with the Filtek Ultimate (2,342 µM), Solidex (7,908 µM), Signum (2.8 µM), and Filtek Ultimate (9.7 µM), respectively. The highest amount of eluted monomer concentrations detected was viewed as critical for toxic reactions in human cells.     

Anticonvulsant Profiles of Certain New 6-Aryl-9-substituted-6,9-diazaspiro-[4.5]decane-8,10-diones and 1-Aryl-4-substituted-1,4-diazaspiro[5.5]undecane-3,5-diones

Synthesis and anticonvulsant potential of certain new 6-aryl-9-substituted-6,9-diazaspiro[4.5]decane-8,10-diones (6a–l) and 1-aryl-4-substituted-1,4-diazaspiro[5.5]undecane-3,5-diones (6m–x) are reported. The intermediates 1-[(aryl)(cyanomethyl)amino]cycloalkanecarboxamides (3a–f) were prepared via adopting Strecker synthesis on the proper cycloalkanone followed by partial hydrolysis of the obtained nitrile functionality and subsequent N-cyanomethylation. Compounds 3a–f were subjected to complete nitrile hydrolysis to give the respective carboxylic acid derivatives 4a–f which were cyclized under mild conditions to give the spiro compounds 5a–f. Ultimately, compounds 5a–f were alkylated or aralkylated to give the target compounds 6a–i and 6m–u. On the other hand, compounds 6j–l and 6v–x were synthesized from the intermediates 5a–f through alkylation, dehydration and finally tetrazole ring formation. Anticonvulsant screening of the target compounds 6a–x revealed that compound 6g showed an ED₅₀ of 0.0043 mmol/kg in the scPTZ screen, being about 14 and 214 fold more potent than the reference drugs, Phenobarbital (ED₅₀ = 0.06 mmol/kg) and Ethosuximide (ED₅₀ = 0.92 mmol/kg), respectively. Compound 6e exhibited an ED₅₀ of 0.019 mmol/kg, being about 1.8 fold more potent than that of the reference drug, Diphenylhydantoin (ED₅₀ = 0.034 mmol/kg) in the MES screen. Interestingly, all the test compounds 6a–x did not show any minimal motor impairment at the maximum administered dose in the neurotoxicity screen.     

Transparent Nanocrystalline Glass-Ceramic System for Organic Pollutants Degradation

Because of the superior photocatalytic activities of nanocrystalline TiO₂ and ZnO under UV irradiation, they were embedded into the glass system (SiO₂, TiO₂, ZnO, B₂O₃, Na₂O, K₂O, P₂O₅, Li₂O and BaO) to provide easy separation from the aqueous system. Different contents of TiO₂ and ZnO have been investigated. Conversion to glass-ceramic materials was carried out by heat treatment at 450 °C, which is the onset of the nucleation peak according to the differential thermal analysis (DTA) result, for different times. This heat treatment regime preserves the transparency of the prepared materials in the visible region and good absorption in the UV region. The high content of TiO₂ or ZnO caused an improvement of microhardness of the prepared materials, though the presence of the two oxides with the same ratio decreased the microhardness values. Photocatalytic activity of the prepared glass-ceramic materials was investigated according to their efficiency for the degradation of humic acid (HA), the major precursor of disinfection by-products (DBPs), from water. All samples were proved to be photoactive with different extents. Four hours heat treatment at 450 °C appears to be the best conditions for the development of TiO₂ and ZnO crystals leading to better photocatalytic activity.     

Laboratory and Field Study of the Attraction of Male Pea Midges, Contarinia pisi, to Synthetic Sex Pheromone Components

Behavioral activity of the recently identified sex pheromone components of the pea midge, Contarinia pisi, (2S,11S)-diacetoxytridecane, (2S,12S)-diacetoxytridecane, and 2-acetoxytridecane, was tested in wind tunnel and field-trapping experiments. In the wind tunnel, the attractancy of the three-component blend in a 7 : 10 : 0.1 ratio (following the above order, mimicking the ratios found in gland extract) did not differ significantly from female gland extract, whereas a mixture of the two major components (7 : 10) only attracted 2% of the males to the source. In the field, traps baited with the three-component blend caught by far the largest number of males. Traps baited with the two major components only caught slightly more than the blank traps, and catches in traps baited with 2-acetoxytridecane alone did not differ from catches in the blank traps. Traps baited with the racemate of all three components did not catch more than the blank traps, indicating that some of the enantiomers are inhibitory.     

Hilbert Transform and Statistical Analysis for Channel Selection and Epileptic Seizure Prediction

This paper is concerned with Electroencephalography (EEG) seizure prediction, which means the detection of the pre-ictal state prior to ictal activity occurrence. The basic idea of the proposed approach for EEG seizure prediction is to work on the signals in the Hilbert domain. The operation in the Hilbert domain guarantees working on the low-pass spectra of EEG signal segments to avoid artifacts. Signal attributes in the Hilbert domain including amplitude, derivative, local mean, local variance, and median are analyzed statistically to perform the channel selection and seizure prediction tasks. Pre-defined prediction and false-alarm probabilities are set to select the channels, the attributes, and bins of probability density functions (PDFs) that can be useful for seizure prediction. Due to the multi-channel nature of this process, there is a need for a majority voting strategy to take a decision for each signal segment. Simulation results reveal an average prediction rate of 96.46%, an average false-alarm rate of 0.028077/h and an average prediction time of 60.1595 min for a 90-min prediction horizon.

     

In vivo study of hybrid biomaterial scaffold bioactive glass–chitosan after incorporation of Ciprofloxacin

The present study aimed to evaluate the effect of bioactive glass as well as the presence of Ciprofloxacin drug (%Cip) into bioactive glass–chitosan composite on the in vivo behavior of these scaffolds. These scaffolds were implanted in the femoral condyl of an ovariectomized rat. The serum and organs (liver and kidney) of the under investigated rats were analyzed. Also the physicochemical properties of the prepared implants were assessed using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) before and after implantation (at different periods of implantation). Biochemical and histological analyses of the under investigated rats proved the biocompatibility of the prepared scaffolds. The hydroxyapatite like layer was significantly precipitated on the surface of BG–CH scaffold than BG–CH–20Cip. In this same period, FT-IR of BG–CH shows complete disappearance of Si–O–Si. Their characteristics bands were replaced by P–O group arisen form bone apatite bands. Physicochemical results show progressive degradation of BG–CH and BG–CH–20Cip that occurred at the same time as replacement of the implant by an apatite layer. However, the bioresorbability and bioactivity of BG–CH are faster than those of BG–CH–20Cip. Therefore, the incorporation of the Ciprofloxacin in the BG–CH induces a retarding effect on the formation of the hydroxyapatite, and consequently on the ossification, without any side effects on the liver–kidney.     

Online collaboration: Collaborative behavior patterns and factors affecting globally distributed team performance

Studying the collaborative behavior of online learning teams and how this behavior is related to communication mode and task type is a complex process. Research about small group learning suggests that a higher percentage of social interactions occur in synchronous rather than asynchronous mode, and that students spend more time in task-oriented interaction in asynchronous discussions than in synchronous mode. This study analyzed the collaborative interaction patterns of global software development learning teams composed of students from Turkey, US, and Panama. Data collected from students’ chat histories and forum discussions from three global software development projects were collected and compared. Both qualitative and quantitative analysis methods were used to determine the differences between a group’s communication patterns in asynchronous versus synchronous communication mode. K-means clustering with the Ward method was used to investigate the patterns of behaviors in distributed teams. The results show that communication patterns are related to communication mode, the nature of the task, and the experience level of the leader. The paper also includes recommendations for building effective online collaborative teams and describes future research possibilities.     

Synthetic Modular Antibody Construction by Using the SpyTag/SpyCatcher Protein-Ligase System

Efforts to engineer recombinant antibodies for specific diagnostic and therapy applications are time consuming and expensive, as each new recombinant antibody needs to be optimized for expression, stability, bio-distribution, and pharmacokinetics. We have developed a new way to construct recombinant antibody-like “devices” by using a bottom-up approach to build them from well-behaved discrete recombinant antibody domains or “parts”. Studies on antibody structure and function have identified antibody constant and variable domains with specific functions that can be expressed in isolation. We used the SpyTag/SpyCatcher protein ligase to join these parts together, thereby creating devices with desired properties based on summed properties of parts and in configurations that cannot be obtained by using genetic engineering. This strategy will create optimized recombinant antibody devices at reduced costs and with shortened development times.     

An efficient IoT based smart farming system using machine learning algorithms

Multimedia Tools and Applications - This paper suggests an IoT based smart farming system along with an efficient prediction method called WPART based on machine learning techniques to predict crop...     

Postintegration methods for numerical integration of non-linear dynamic equations of motion

The paper presents a family of methods with postintegration, for numerical integration of non-linear dynamic equations of motion of discrete systems. Both explicit and implicit algorithms of these methods are conditionally stable, but can give solutions of accuracy of a few orders higher than the known methods with preintegration, corresponding to them. A general analysis of stability and accuracy of single-step methods is carried out. The postintegration methods have been tested on a single-degree-of-freedom non-linear system.