Hydrothermal crystal growth of perovskite-type fluorides

Single crystals of perovskite-type fluorides were grown from potassium fluoride and di-valent metal chloride solutions by a hydrothermal method under a temperature gradient, at maximum temperature 600° C and pressure 98 MPa. Single-crystal cubes of KMnF₃, KFeF₃, KCoF₃ and KZnF₃, of cube edge sizes ranging from 0.2 to 2.0 mm, were grown. Crystals of KNiF₃ grew in rectangular prisms and those of KCdF₃ in anhedral form. Single crystals of KCuF₃ were grown in pure water from co-precipitated KCuF₃ powder. KMgF₃ crystals were not grown by this method.     

Solid-state microwave relay systems in Japan

In response to the rapidly increasing demand for communication facilities, microwave relay systems have played an important role in Japan's telecommunications network because of their economy and capability for broadband transmission. Their progress has been marked during the past 20 years and this development has been supported by advances in such diverse fields as radio propagation, antennas, microwave and electronic circuitry, electron devices, and, particularly, in solid-state techniques. This article reviews the history of microwave relay systems and describes the past and expected future contributions of the solid-state technology to these systems.     

Characteristics of chlorophyll formation of the aerial microalga Coelastrella striolata var. multistriata and its application for environmental biomonitoring

The growth and ammonium uptake of the aerial microalga Coelastrella striolata var. multistriata, which was isolated from the surface of rocks, were characterized in this study. The specific growth rate of the alga was mu=0.3 d(-1), as calculated in the growth logarithmic phase. The algal cells were able to remove almost 100% of the ammonium ions from medium in 5 d, with the removal rate of ammonium-N being 0.4 mg/l/h. It was shown that the alga has a unique ability to be a reddish orange to green color depending on the nitrogen source concentration in the medium. Astaxanthin, adonixanthin, canthaxanthin, and beta-carotene were found in the reddish orange cells of the alga. The assessment of water pollution was attempted using this aerial microalga. When the reddish orange alga was incubated in the experimental medium with added ammonium-, nitrate-, or urea-N as a nitrogen source, an approximately linear relationship existed between the nitrogen concentration and chlorophyll formation. Using the chlorophyll formation of the alga, for example, it was possible to estimate spectrophotometrically the total nitrogen content in water collected from aquatic systems. Biofunctional materials for environmental biomonitoring using photosynthetic microorganisms are called green devices in this study.     

Relation between scuffing resistance and the increase in surface hardness during tests under conditions of rolling/sliding

The effect on scuffing resistance of a change in the condition of the rubbing surfaces, especially surface hardness, was investigated using a two-disc machine. Scuffing resistance increased with increasing surface hardness during testing. The increase of surface hardness by work hardening is more beneficial in preventing scuffing than is a change in carbon content or heat treatment. Work-hardened disc surfaces allow surface film formation as a result of plastic deformation. Materials with large Meyer indices and high surface hardness are less prone to scuffing.     

A spherical aberration-corrected 200 kV TEM

A spherical aberration (Cs)-corrected 200 kV TEM was newly developed. The column of the microscope was extended by 25 cm and the inner yoke of the objective lens was modified to insert some parts of the corrector elements. The corrector has two hexapole elements that play a main role in Cs correction and they are placed at a position equivalent to the coma-free point of the objective lens by using two transfer doublet lenses. The Cs correction was successfully carried out by means of the third-order aberration that was generated in the two extended hexapoles. The Cs can be corrected to the desired value and also can be overcompensated in order to produce a negative Cs, as with the corrected Cs of -23 microm shown in this work. The optical system of the corrector does not produce second- and fourth-order aberrations, and can correct residual aberrations up to the third order. All of the corrector elements are computer-controlled and the third-order aberrations are quite stable after they are properly corrected. The resolution of 0.135 nm was experimentally confirmed by the Young's fringe method. Image simulations of a silicon [110] single crystal were made with various Cs and defocus values to demonstrate the effectiveness of arbitral control of Cs.     

Proportion of aflatoxin B1 contaminated kernels and its concentration in imported peanut samples

Moldy and split peanut kernels were separated from peanuts exported from Brazil, Sudan, India and Taiwan by visual inspection. The remaining peanuts from Brazil, Sudan and India were roasted lightly and the skins were removed. Stained peanuts were separated from the others. Aflatoxin was detected in moldy and stained peanuts. There was a positive correlation between % of aflatoxin-contaminated peanut kernels and aflatoxin B1 concentration in whole samples. Aflatoxin concentration of moldy peanuts was higher than that of stained peanut kernels.     

Fast template matching algorithm for contour images based on its chain coded description applied for human face identification

A new matching algorithm for contour images described by chain coded expression is presented. In our face authentication system, the isodensity contours has been introduced to differentiate between the facial features. These isodensity contours can be transformed into chain codes. By using these coded isodensity contours, remarkable improvement in the processing performance can be expected in terms of the processing time and memory requirements.From the computer simulation performed using images of 50 people, it turned out clear that the processing time was decreased to approximately one-seventh compared to the conventional method. With respect to memory requirement, it was reduced to a quarter.