The role of adsorbate overlayers in thiophene hydrodesulfurization over molybdenum and rhenium single crystals

Thiophene hydrodesulfurization (HDS) has been investigated over model single crystal catalysts of molybdenum and rhenium. Thiophene HDS is a structure sensitive reaction over rhenium and a structure insensitive reaction over molybdenum. Adsorbed sulfur decreases the activity of both Re(0001) and Mo(100) surfaces while adsorbed carbon has distinctly different effects on the catalytic properties of the two metals. Carbon overlayers deactivate the Re(0001) surface but have no effect on the HDS activity of the Mo(100) surface. Radiotracer³⁵S and¹⁴C studies indicate that HDS occurs on an adsorbate overlayer on molybdenum comprised primarily of carbon. HDS over rhenium, on the other hand, occurs on the bare metal surface. This appears to be responsible for the observed differences in the influence of surface structure on HDS activity.     

Upgrading of gas oils: the HDS kinetics of dibenzothiophene and its derivatives in real gas oil

The hydrodesulphurization (HDS) of dibenzothiophene (DBT), 4-methyl dibenzothiophene (4 M-DBT), 4,6-dimethyl dibenzothiophene (4,6 DM-DBT) and 4,6-diethyl dibenzothiophene (4,6 DE-DBT) as real gas oil components on NiMo/Al₂O₃ catalyst was investigated. On the basis of the first order rate constants of HDS of the individual sulphur compounds reactivities of the investigated compounds decreased in the order DBT ≫ 4 M-DBT > 4,6 DE-DBT ≈ 4,6 DM-DBT. Apparent activation energies of HDS of above sulphur compounds increased from 80.0 to 120.5 kJ/mol.     

Relationship between Creativity, Imitation, and Cultural Diversity

There are both benefits and drawbacks to cultural diversity. It can lead to friction and exacerbate differences. However, as with biological diversity, cultural diversity is valuable in times of upheaval; if a previously effective solution no longer works, it is good to have alternatives available. What factors give rise to cultural diversity? This paper describes a preliminary investigation of this question using a computational model of cultural evolution. The model is composed of neural network based agents that evolve fitter ideas for actions by (1) inventing new ideas through modification of existing ones, and (2) imitating neighbors'' ideas. Numerical simulations indicate that the diversity of ideas in a population is positively correlated with both the proportion of creators to imitators in the population, and the rate at which creators create. This is the case for both minimum and peak diversity of actions over the duration of a run.     

Development of a Phytochemical-Based Lure for the Dried Bean Beetle Acanthoscelides obtectus Say (Coleoptera: Chrysomelidae)

The dried bean beetle, Acanthoscelides obtectus, is an economically important, worldwide pest of legume crops including dry beans, Phaseolus vulgaris. Assessment of A. obtectus infestation levels in pre-harvest field crops and post-harvest granaries is difficult to achieve because there is no effective monitoring tool for early detection so that interventions can be deployed as needed. Because A. obtectus is a generic pollen and nectar feeder, we adopted an electrophysiological (EAG) screening approach, using the antennae of female A. obtectus to identify physiologically active, volatile phytochemicals, which could then be investigated for their attractiveness to A. obtectus in laboratory behavioral assays and preliminary field tests. Of the 27 compounds tested in EAG screening, 5 compounds, i.e., methyl anthranilate, methyl eugenol, benzyl alcohol, (RS)-lavandulol, and 2-phenylethanol, elicited stronger EAG responses than the standard (1-phenylethanol). In 4-arm olfactometer bioassays, female A. obtectus preferred the olfactometer arm containing the odor of either methyl anthranilate or benzyl alcohol compared to the solvent control. In preliminary field tests using these 2 compounds as a binary mixture, at least 5 times as many beetles were caught on baited traps compared to non-baited traps. The field data also suggested that benzyl alcohol was primarily responsible for the field activity of the blend. We hypothesize that the attraction of A. obtectus to the combined benzyl alcohol/methyl anthranilate and the single benzyl alcohol baits is connected to the species` nectar- and pollen-feeding behaviour and not to its intraspecific communication. To our knowledge, this is the first evidence that A. obtectus behavior in the field can be modified by the deployment of plant-derived semiochemicals.

     

Weep hole inspection by circumferential creeping waves

This paper reports the development of a novel ultrasonic inspection technique that detects radial fatigue cracks on the far side of thin airframe stiffener ‘weep’ holes. These cracks are located on the upper part of the weep hole (12 o'clock position), away from the lower skin of the wing. Cracks in this position are not readily detectable by conventional ultrasonic inspection techniques, particularly for short cracks. A special technique using circumferential creeping waves was adapted to inspect for these cracks. The conventional creeping wave technique experiences a strong specular reflection from the near surface of the hole that masks the creeping wave signal that arrives later in time. In order to overcome this difficulty, a split-aperture (two-element) transducer was used that resulted in the specular and creeping wave echoes being approximately equal in magnitude. The two separate transducers allowed us to alternate between pulse-echo and pitch-catch modes of operation with a resulting improvement in detection sensitivity. In the case of 0.25-inch-diameter weep holes, optimum sensitivity was calculated to be around 5 MHz. The detection threshold was found to be approximately 0.003 inches and the signal saturated at crack lengths in excess of 0.020 inches. The original paint and surface finish had no substantial adverse effects on the technique's sensitivity. Similarly, changing the weep hole diameter or chamfer conditions did not significantly affect the technique's performance. These results were obtained using specimens with both machined notches and real fatigue cracks.     

3-D route-planning support for navigation in a complex indoor environment

Three-dimensional (3-D) route-planning support offers a promising solution to overcome problems with wayfinding in complex indoor environments. An experiment was conducted to test the effect of 3-D route-planning support in a realistic setting, a large hospital building, during normal operation. Forty participants performed navigation tasks either with (n?=?20) or without (n?=?20) 3-D route-planning support. Support resulted in faster navigation, more use of artwork specifically installed to aid wayfinding, fewer navigation errors, less disorientation and less anxiety. In addition, participants used different strategies for wayfinding: without navigation support they used signs and route colour, but with navigation support they used not only the artwork, but also the existing furniture and other landmarks. The acceptance of 3-D route-planning support was high. Overall, the results support the value of 3-D route-planning support.     

The vehicle routing problem with restricted mixing of deliveries and pickups

The vehicle routing problem with deliveries and pickups is one of the main problems within reverse logistics. This paper focuses on an important assumption that divides the literature on the topic, namely the restriction that all deliveries must be completed before pickups can be made. A generalised model is presented, together with a mathematical formulation and its resolution. The latter is carried out by adopting a suitable implementation of the reactive tabu search metaheuristic. Results show that significant savings can be achieved by allowing a mixture of delivery and pickup loads on-board and yet not incurring delays and driver inconvenience.     

Comparative effects of gamma and microwave irradiation on the quality of black pepper

Powdered black pepper from Egyptian markets, was irradiated with different recommended doses of gamma rays (5.0 and 10.0 kGy) and with microwaves for different periods (20, 40 and 75 s) to improve its hygienic quality. The most common bacterial isolates were of three generaBacillus, Clostridium andMicrococcus (7.5 × 10⁶), whereas the predominant fungi (7.8 × 10⁴) wereAspergillus species,A. glaucus, A. flavus, A. niger andA. ochraceus. Doses of gamma irradiation used (5.0 and 10 kGy) were sufficient to decrease spore-forming bacteria (SFB) and to inhibit the fungal flora and coliforms which contaminated the black pepper powder. Microwave treatments for 40 s and 75 s were of the same effectiveness whereas treatment for 20 s was less so. GLC analysis proved the presence of 31 peaks, only 19 compounds were identified as monoterpene hydrocarbons (56.21%), the major one being -phellandrene and limonene. Sesquiterpenes were also present, mainly -caryollphyllene (3.69%) as well as oxygenated compounds such as terpenol, geraniol, Me-chavicol, eugenol and anisol. Gamma irradiation at 5 kGy and 10 kGy respectively decreased the numbers of identified compounds from 21 (86.58% concentration) in untreated pepper to 16 (59.22% concentration), 15 (54.06% concentration). In comparison, microwave treatments, particularly for 40 s and 75 s, increased the concentration of the same compounds. The results obtained indicate that microwave treatment, under these conditions, is a safe and suitable technique for decontamination of black pepper which does not result in a great loss of flavour compounds, as compared with recommended doses of gamma irradiation.