Synthesis route and three different core-shell impacts on magnetic characterization of gadolinium oxide-based nanoparticles as new contrast agents for molecular magnetic resonance imaging

Despite its good resolution, magnetic resonance imaging intrinsically has low sensitivity. Recently, contrast agent nanoparticles have been used as sensitivity and contrast enhancer. The aim of this study was to investigate a new controlled synthesis method for gadolinium oxide-based nanoparticle preparation. For this purpose, diethyleneglycol coating of gadolinium oxide (Gd₂O₃-DEG) was performed using new supervised polyol route, and small particulate gadolinium oxide (SPGO) PEGylation was obtained with methoxy-polyethylene-glycol-silane (550 and 2,000 Da) coatings as SPGO-mPEG-silane550 and 2,000, respectively. Physicochemical characterization and magnetic properties of these three contrast agents in comparison with conventional Gd-DTPA were verified by dynamic light scattering transmission electron microscopy, Fourier transform infrared spectroscopy, inductively coupled plasma, X-ray diffraction, vibrating sample magnetometer, and the signal intensity and relaxivity measurements were performed using 1.5-T MRI scanner.As a result, the nanoparticle sizes of Gd₂O₃-DEG, SPGO-mPEG-silane550, and SPGO-mPEG-silane2000 could be reached to 5.9, 51.3, 194.2 nm, respectively. The image signal intensity and longitudinal (r₁) and transverse relaxivity (r₂) measurements in different concentrations (0.3 to approximately 2.5 mM), revealed the r₂/r₁ ratios of 1.13, 0.89, 33.34, and 33.72 for Gd-DTPA, Gd₂O₃-DEG, SPGO-mPEG-silane550, and SPGO-mPEG-silane2000, respectively.The achievement of new synthesis route of Gd₂O₃-DEG resulted in lower r₂/r₁ ratio for Gd₂O₃-DEG than Gd-DTPA and other previous synthesized methods by this and other groups. The smaller r₂/r₁ ratios of two PEGylated-SPGO contrast agents in our study in comparison with r₂/r₁ ratio of previous PEGylation (r₂/r₁ = 81.9 for mPEG-silane 6,000 MW) showed that these new three introduced contrast agents could potentially be proper contrast enhancers for cellular and molecular MR imaging.     

Effect of single-walled carbon nanotubes on morphology and mechanical properties of NBR/PVC blends

Dynamically vulcanized thermoplastic elastomer based on Nitrile butadiene-rubber (NBR)/PVC with functionalized single-walled carbon nanotubes (f-SWNTs) and non-functionalized single-walled carbon nanotubes (SWNTs) were prepared using a brabender internal mixer. Effects of two types of SWNTs (functionalized and non-functionalized) on morphology and mechanical properties of NBR/PVC blends were studied. Results showed that the mechanical properties of NBR/PVC/SWNTs nanocomposites improved with the increasing of SWNTs content and in particular with the increase of f-SWNTs content. Moreover, the enhancement of mechanical properties of NBR/PVC blends reinforced with functionalized SWNT was higher than that of NBR/PVC blends with non-functionalized SWNT. Dispersion of SWNTs and morphology of NBR/PVC/SWNT nanocomposites were determined by scanning electron microscopy and transmission electron microscopy (TEM) techniques. TEM images illustrated that f-SWNTs were dispersed uniformly in NBR/PVC matrix while non-functionalized SWNTs showed much aggregation. Dynamic mechanical thermal analysis of NBR/PVC/SWNTs nanocomposites was also studied. The outcomes indicated that in the case of f-SWNTs, the intensity of tan ?? peak was lower than that in the case of non-functionalized SWNTs. Meanwhile, the intensity of tan ?? peak reduced when the content of f-SWNTs was increased.     

An analog/digital pre-distorter using particle swarm optimization for RF power amplifiers

In this paper, a novel pre-distorter is presented using the particle swarm optimization (PSO) for an RF power amplifier linearization has been presented. We used the PSO in order to design of an efficient pre-distorter for the linearization of the output of an RF power amplifier by using the output data of the proposed power amplifier. The PSO is implemented to estimate and optimize the coefficient parameters of the work function in the proposed pre-distorter block diagram. The proposed method using PSO is most efficient because this approach is independent of the output of the power amplifier. The proposed method has been simulated with two-tone input signal and output power spectrum has been compared, where the obtained adjacent channel leakage ration (ACLR) is better than 50 dBc for both channels. Therefore, a quite significant improvement in linearity is achieved.     

CHAMOMILE (Matricaria recutita) EXTRACT AS A CORROSION INHIBITOR FOR MILD STEEL IN HYDROCHLORIC ACID SOLUTION

The corrosion inhibition of mild steel in hydrochloric acid solution by chamomile (Matricaria recutita) extract (CE) was investigated through electrochemical (polarization, EIS) and surface analysis (optical microscopy/AFM/SEM) techniques. The effects of inhibitor concentration, temperature, and pH were evaluated. Thermodynamic parameters were calculated and adsorption studies were carried out. Finally, the surface morphology was investigated. The electrochemical studies showed that CE acts as a mixed-type corrosion inhibitor with predominantly anodic behavior. CE was adsorbed physically on the metal surface and obeyed the Langmuir adsorption isotherm. It impeded the corrosion processes by changing the activation energy. In the presence of CE, the metal surface was more uniform than the surface in the absence of inhibitor. Maximum inhibition efficiency (IE) was 93.28%, which was obtained at 22°C in 7.2 g/L of inhibitor in 1 M HCl solution.     

Effect of Magnetopriming on Photosynthetic Performance of Plants

Magnetopriming has emerged as a promising seed-priming method, improving seed vigor, plant performance and productivity under both normal and stressed conditions. Various recent reports have demonstrated that improved photosynthesis can lead to higher biomass accumulation and overall crop yield. The major focus of the present review is magnetopriming-based, improved growth parameters, which ultimately favor increased photosynthetic performance. The plants originating from magnetoprimed seeds showed increased plant height, leaf area, fresh weight, thick midrib and minor veins. Similarly, chlorophyll and carotenoid contents, efficiency of PSII, quantum yield of electron transport, stomatal conductance, and activities of carbonic anhydrase (CA), Rubisco and PEP-carboxylase enzymes are enhanced with magnetopriming of the seeds. In addition, a higher fluorescence yield at the J-I-P phase in polyphasic chlorophyll a fluorescence (OJIP) transient curves was observed in plants originating from magnetoprimed seeds. Here, we have presented an overview of available studies supporting the magnetopriming-based improvement of various parameters determining the photosynthetic performance of crop plants, which consequently increases crop yield. Additionally, we suggest the need for more in-depth molecular analysis in the future to shed light upon hidden regulatory mechanisms involved in magnetopriming-based, improved photosynthetic performance.     

Optimization of natural convection heat transfer of Newtonian nanofluids in a cylindrical enclosure

This study characterizes and optimizes natural convection heat transfer of two Newtonian Al2O3 and TiO2/water nanofluids in a cylindrical enclosure. Nusselt number (Nu) of nanofluids in relation to Rayleigh number (Ra) for different concentrations of nanofluids is investigated at different configurations and orientations of the enclosure. Results show that adding nanoparticles to water has a negligible or even adverse influence upon natural convec-tion heat transfer of water:only a slight increase in natural convection heat transfer of Al2O3/water is observed, while natural convection heat transfer for TiO2/water nanofluid is inferior to that for the base fluid. Results also reveal that at low Ra, the likelihood of enhancement in natural convection heat transfer is more than at high Ra:at low Ra, inclination angle, aspect ratio of the enclosure and nanoparticle concentration influence natural convec-tion heat transfer more pronouncedly than that in high Ra.     

Proposal of a probabilistic assessment of structural collapse concomitantly subject to earthquake and gas explosion

In recent decades, many public buildings, located in seismic-prone residential areas, had to grapple with abnormal loads against which the structures were unguarded. In this piece of research, an ordinary three dimensional reinforced concrete building is selected as case study. The building is located in an earthquake-prone region; however, it is designed according to seismic building codes. Yet, it is not shielded against abnormal loads, such as blasts. It is assumed that the building suffers a blast load, due to mechanical/thermal installation failure during or after intense seismic oscillations. These two critical incidents are regarded codependent and compatible. So the researchers developed scenarios and tried to assess different probabilities for each scenario and carried out an analysis to ensure if progressive collapse had set in or not. In the first step, two analysis models were used for each scenario; a non-linear dynamic time history analysis and a blast local dynamic analysis. In the second step, having the structural destructions of the first step in view, a pushdown analysis was carried out to determine the severity of progressive collapse and assess building robustness. Finally, the annual probability of structural collapse under simultaneous earthquake and blast loads was estimated and offered.     

Oxidative desulfurization of model and real oil samples using Mo supported on hierarchical alumina-silica: Process optimization by Box-Behnken experimental design

The catalytic performance of Mo supported on hierarchical alumina-silica (Si/Al=15) with Mo loadings of 3, 6 and 15 wt% was investigated for the oxidative desulfurization (ODS) of model and real oil samples. Hierarchical alumina-silica (hAl-Si) was synthesized by economical and ecofriendly silicate-1 seed-induced route using cetyltrimethylammonium bromide (CTAB) as mesoporogen. The effect of CTAB on the structure of catalyst was studied by characterization techniques. The results revealed that 6%Mo/hAl-Si had the highest sulfur removal compared to the other catalyst loadings. The effect of operating parameters was evaluated using Box-Behnken experimental design. The optimal desulfurization conditions with the 6%Mo/hAl-Si catalyst were determined at oxidation temperature of 67℃, oxidation time of 42 min, H₂O₂/S molar ratio of 8 and catalyst dosage of 0.008 g·ml^-1 for achieving a conversion of 95%. Under optimal conditions, different sulfur-containing compounds with initial concentration of 1000 ppm, Dibenzothiophene (DBT), Benzothiophene (BT) and Thiophen (Th), showed the catalytic oxidation reactivity in the order of DBT > BT > Th. According to the regeneration experiments, the 6%Mo/hAl-Si catalyst was reused 4 times with a little reduction in the performance. Also, the total sulfur content of gasoline and diesel after ODS process reached 156.6 and 4592.2 ppm, respectively.