心理资本前因变量研究

采用心理资本问卷对分别属于医药、建筑、水利工程、电信、通讯运营和服务行业的6家企业的员工进行了调查.根据对回收的283份有效问卷的统计分析,认为员工的性别、受教育程度和所在企业的性质对员工心理资本不会产生显著性影响,而员工年龄的影响显著,50岁以上员工的总体心理资本水平高于其他年龄段员工.     

基于改进的BASS模型的服装产品生命周期研究

为提高服装的销售预测准确度,通过产品的生命周期曲线模型,使得服装销售预测的定性分析与定量预测有机地结合在一起。针对目前服装产品生命周期曲线模型的局限性,引入改进的BASS模型,对服装产品生命周期进行研究。通过销售实例探讨改进的BASS模型用于描述服装生命周期的可行性,建立了以改进的BASS模型为基础的服装产品生命周期模型,并利用该模型对服装销售量做预测,取得了比其他模型更高的精度。     

新型醋酸乙烯聚合引发剂的研究

采用新型引发剂过氧化二月桂酰对醋酸乙烯聚合进行研究,通过研究它在聚合过程中的分解速率常数、半衰期等性能,得出过氧化二月桂酰的分解速率常数大,半衰期与偶氮二异丁腈相似,并且产物不含有毒物质,因此它的应用范围可以更加广泛。讨论了引发剂质量、甲醇质量、反应时间对醋酸乙烯转化率和聚合度的影响。建立正交试验得到醋酸乙烯聚合的最佳工艺条件。     

Fabrication and characterization of nano silver powder prepared by spray pyrolysis

Silver powder was fabricated by spray pyrolysis, using 2%–20% AgNO₃ solution, 336–500 mL/h flux of AgNO₃ solution, 0.28–0.32 MPa flux of carrier gas and in the 620–820 °C temperature range. The effects of furnace set temperature, concentration of AgNO₃ aqueous solution, flux of AgNO₃ aqueous solution as well as carrier gas on the morphology and particle size distribution of silver powder, were investigated. The experimental results showed that with the high concentration of AgNO₃ aqueous solution, the average grain size of silver decreased with the increasing of furnace set temperature. But the gain size distribution was not homogenous, the discontinuous grain growth occurred. With the low concentration of AgNO₃ aqueous solution, the higher furnace set temperature made the nano sliver grains sintered together to grow. Nano silver powder about 100 nm was fabricated by spray pyrolysis, using 2wt% AgNO₃ solutions, 336 mL/h flux of AgNO₃ aqueous solution, 0.32 MPa flux of carrier gas at 720 °C furnace set temperature.     

基于行为金融理论的非理性投机泡沫模型

为了从投资者非理性的角度揭示资产泡沫的生成机理,为股市泡沫监管提供更有效的工具,本文在基于行为金融理论的价值函数基础上,对噪音投资者模型进行改进,从利空和利多两个方面考查投资者行为因素的影响,从而构造出新的非理性投资泡沫模型,并利用我国股市数据对模型进行实证研究.结果证明,该模型更切合事实的非理性投机泡沫的发展过程.     

Corner forming of AZ61A magnesium alloy tube within warm hydroforming

The corners with small radii on cross sections are crucial for forming hydroformed components with polygonal sections.In this paper,warm hydroforming experiments of AZ61A magnesium alloy tubes were carried out to study the forming regularity of round corners by using a demonstration part with square sections.Effects of temperature on radius forming,thinning ratio distribution and microstructure were revealed and a component with relative outer corner radius of 3.0 was obtained by warm hydroforming at 240℃.The minimum thickness of the formed square section was located in the transition position between the corner and the straight wall.The thinning ratio of the round corner increased with the increase of forming temperature.Formability of the magnesium tube was improved by raising temperature under the effect of dynamic recrystallization at 240℃.     

Zn掺杂对GdMnO体系的晶体结构影响

系统研究了Gd（1-x）ZnxMnO3（x=0,0.2,0.4,0.6,0.8,1.0）体系的结构。结果表明,实验样品具有正交对称性结构。当Zn掺杂浓度x≤0.4时,随着Zn掺杂浓度的增加,晶格常数b、c减小,而晶格常数a增大,晶胞体积逐渐减小;当掺杂浓度x≥0.6时,Zn掺杂浓度的增加,晶格常数b、c增大,而晶格常数a减小,晶胞体积逐渐增大。计算表明Gd（1-x）ZnxMnO3系列化合物的容忍因子在0.76~0.92范围,可以形成稳定的钙钛矿结构。     

Zonal disintegration phenomenon in enclosing rock mass surrounding deep tunnels -- Elasto-plastic analysis of stress field of enclosing rock mass

The zonal disintegration phenomenon (ZDP) is a typical phenomenon in deep block rock masses. In order to investigate the mechanism of ZDP, an improved non-linear Hock-Brown strength criterion and a bi-linear constitutive model of rock mass were used to analyze the elasto-plastic stress field of the enclosing rock mass around a deep round tunnel. The radius of the plastic region and stress of the enclosing rock mass were obtained by introducing dimensionless parameters of radial distance. The results show that tunneling in deep rock mass causes a maximum stress zone to appear in the vicinity of the boundary of the elastic and the plas-tic zone in the surrounding rock mass. Under the compression of a large tangential force and a small radial force, the rock mass in the maximum stress zone was in an approximate uniaxial loading state, which could lead to a split failure in the rock mass.     

Relation between structural evolution of the Longmenshan orogenic zone and sedimentation of its foreland basin

In order to determine the area for oil and gas exploration in China's north Sichuan basin, we have divided the time during which the Longmenshan foreland basin was formed into five periods, based on the sedimentary response relationship of the fore-land basin to structural evolution: 1) a late Triassic Noric period; 2) an early-Middle Jurassic period; 3) a late Jurassic to early Cre-taceous period; 4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well, we analyzed the sedimen-tary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area, making it a major region for future oil and gas exploration in China's northern Sichuan basin.