Polygon approximation of the fringes of diffractive elements

In the electron-beam fabrication of interferogram-type diffractive elements, such as diffractive lenses, continuous fringes are often approximated by polygons to reduce the data volume. Local wave-front errors are then generated that scatter light and give rise to background noise. A roughness parameter beta is introduced to quantify local phase errors in polygon-encoded diffractive structures. An efficient numerical method is developed to compute the Fresnel diffraction pattern of a polygon aperture. Polygon-approximated diffractive axicons and lenses are then investigated to determine the dependence of the signal fidelity on beta. It is found, e.g., that the maximum local phase error must be as large as pi/6 rad before the Strehl ratio S of a paraxial diffractive lens reduces below S = 0.9. However, much smaller errors can noticeably break the circular symmetry of the diffraction pattern.     

A high capacity tunable retransmission type frequency coded chipless radio frequency identification system

This article presents a 12‐bit frequency coded chipless RFID system in the frequency range of 3 to 6 GHz. The system consists of a fully printable chipless tag and a pair of high‐gain reader antennas. The tag also incorporates its own antennas to improve the read range. Information is encoded into frequency spectrum using a multi‐resonant circuit. The circuit consists of multiple microstrip U and L‐shaped open stub resonators patterned in a unique configuration. The proposed configuration aids in capturing more data in a reduced space as well as tunable frequency operation. Tag and reader antennas utilize techniques such as stepped impedance feeding line, defective partial ground plane, and stair‐step patch structure to achieve wide‐band impedance bandwidth in miniature size. The results of the wireless measurements in the non‐anechoic environment show that the proposed system has a reading range of more than 20 cm. The presented system possesses great potential for low‐cost short‐range inventory tracking.     

Use of plant stanol ester margarine among persons with and without cardiovascular disease: Early phases of the adoption of a functional food in Finland

Background

The plant stanol ester margarine Benecol^® is a functional food that has been shown to lower effectively serum total and LDL-cholesterol. The purpose of this post-marketing study is to characterize users of plant stanol ester margarine with and without cardiovascular disease.

Methods

A cohort of plant stanol ester margarine users was established based on a compilation of 15 surveys conducted by the National Public Health Institute in Finland between 1996–2000. There were 29 772 subjects aged 35–84 years in the cohort. The users of plant stanol ester margarine were identified by the type of bread spread used.

Results

The plant stanol ester margarine was used as bread spread by 1332 (4.5%) subjects. Almost half (46%) of the users reported a history of cardiovascular disease. Persons with cardiovascular disease were more likely to use plant stanol ester margarine (8%) than persons without cardiovascular disease (3%). Users with and without cardiovascular disease seemed to share similar characteristics.In particular, they were elderly people with otherwise healthy life-styles and diet. They were less likely smokers, more likely physically active and less likely obese than nonusers. The users reported being in good or average health in general and having used cholesterol-lowering drugs.

Conclusion

Plant stanol ester margarine seems to be used by persons for whom it was designed and in a way it was meant: as part of efforts for cardiovascular disease risk reduction.

     

IMPROVEMENTS IN THE SURFACE CHARACTERISTICS OF STAINLESS STEEL WORKPIECES BY BURNISHING WITH AN AMORPHOUS DIAMOND-COATED TIP

Burnishing is a cold working process that can be used to improve surface finish and surface hardness of workpieces. Conventionally, diamond or hard metal burnishing tools are used. In the present work, a novel burnishing tool was created by depositing amorphous diamond coating (AD) on a stainless steel tip. This tool was used to improve the surface finish and surface hardness of Nitronic-50 HS stainless steel workpieces. Nitronic-50 HS is used in a wide range of applications in industry. The burnishing process was carried out at different burnishing parameters (force, revolution speed, feed and number of tool passes). Burnishing parameters had a significant effect on the finishing process and they had to be optimized to achieve the best results. Remarkable improvements in surface finish (70% decrease in roughness) and hardness (25% increase) could be achieved with this tool and process in the surface finishing of Nitronic-50 stainless steel workpieces. From the tribological point of view, the AD-coated tip performed slightly better than a corresponding tip modified from a commercial polycrystalline diamond tip. AD coating seems to be very suitable for use in mechanical surface finishing tools such as a burnishing tip.     

Persistent luminescent particles containing bioactive glasses: Prospect toward tracking in-vivo implant mineralization using biophotonic ceramics

In this paper, we demonstrate that persistent luminescent bodies can be obtained by carefully choosing the sintering temperatures and duration. A borosilicate and a phosphate glasses were sintered into bodies with persistent luminescent (PeL) SrAl₂O₄:Eu²⁺,Dy³⁺ microparticles which have a green emission up to tens of hours after ceasing irradiation. When sintered at high temperature for a short time or at lower temperature for a longer time, a decrease in the PeL from the bodies was observed and was related to the glasses crystallization. A decrease in the PeL from the bodies was also observed after immersion in simulated body fluid and was related to the mineralization of the sintered bodies. Therefore, we clearly show that by tracking the changes in the PeL overtime, these PeL bodies have a real potential application as biophotonic sensors to track dissolution and mineralization of the implant in the body.     

Effect of biological wastewater treatment on the molecular weight distribution of soluble organic compounds and on the reduction of BOD, COD and P in pulp and paper mill effluent

Pulp and paper mill wastewater was characterizated, before (influent) and after (effluent) biological wastewater treatment based on an activated sludge process, by microfiltration (8, 3, 0.45 and 0.22mum) and ultrafiltration (100, 50, 30 and 3kDa) of the wastewater samples into different size fractions. Various parameters were measured on each fraction: molecular weight distribution (MWD) using high performance size exclusion chromatography (HPSEC), total organic carbon (TOC), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorus (Tot-P), phosphate phosphorus (PO(4)-P), electrical conductivity, pH, turbidity, charge quantity and zeta potential. The MWD, TOC and COD(Cr) results indicated that the majority of the material present in both the influent and effluent was in the medium molecular weight (MW) range (i.e. MW<10kDa) with three main MW sub-fractions. There were no significant differences in the range of the MWD between the influent and effluent samples. The magnitude of the MWD in the effluent was about one half that in the influent, the greatest reduction being in the 6kDa fraction. The 3kDa fractions of both the influent and effluent showed a considerable increase in BOD(7), probably due to the removal of compounds harmful to bacteria in 3kDa ultrafiltration. Influent turbidity decreased considerably in microfiltration (8-0.22mum). As the turbidity was removed by 0.22mum filtration, the anionic charge quantity started to decrease. Particles in the influent and effluent contained 19-29% and 14-20% of the total phosphorus, respectively. The major phosphorus fraction was in the form of soluble phosphate.     

Methods of Testing Discrete Semiconductors in the 1149.4 Environment

This paper describes measurement methods for testing discrete semiconductors in the environment defined by the IEEE 1149.4 standard for a mixed-signal bus. First, the paper introduces and illustrates measurement procedures for obtaining such essential electrical parameters of diodes and transistors as can be used for testing and identification. Then, the procedures are carried out and the achieved measurement results presented. To demonstrate the usability of the measurement procedures, the paper then presents test methods and measurement results for discrete component blocks. The results indicate that testing and measuring some of the electrical parameters of discrete semiconductors is possible in the 1149.4 environment. These parameters allow the determination of whether the component under test is working properly or not. Our tests only covered the semiconductors’ DC features, disregarding their AC features. Also discussed are limitations of the 1149.4 environment in discrete semiconductor testing.