Electrochemically reduced Pt oxide thin film as a highly active electrocatalyst for direct ethanol alkaline fuel cell

The Pt oxide thin film and Pt thin film were prepared by reactive sputtering and the electrocatalytic activity of the ethanol oxidation reaction was investigated in a KOH solution for developing the alkaline direct ethanol fuel cells. After electrochemical reduction by passing a cathodic electric charge, the Pt oxide thin film showed 29 times larger ethanol oxidation current than the Pt thin film. This superior activity was caused by an increase in the electrochemical active surface area and the existence of residual oxygen, which was confirmed by cyclic voltammetry and XPS measurement. Due to the contribution of the residual oxygen, the rate-determining step of the ethanol oxidation reaction might change, because the Tafel slope of the Pt oxide thin film during the ethanol oxidation reaction was changed by electrochemical reduction. Despite the total Pt amount in the Pt oxide thin film being smaller than that in the Pt thin film, the Pt oxide thin film showed excellent ethanol oxidation activity. Therefore, the Pt oxide treated by electrochemical reduction may be a promising anode catalyst for the direct ethanol fuel cells.     

Low‐Energy Electron Beam Induced Charging and Secondary Electron Emission Properties of FEP Film Used on Satellite Surfaces

Many kinds of insulating materials are used outside a spacecraft. They include FEP films, polyimide films, and so on, and are used as thermal control materials. These materials are exposed to a charged‐particle environment around the spacecraft. Thus then become charged due to charged particles, especially electrons. It has been pointed out that charging of these materials is likely to cause discharges on the surfaces. From this viewpoint, we investigated the charging potential characteristics of 127‐μm‐thick FEP film, a typical thermal control material, by exposing it to electron irradiation at various energies below 20 keV. In the dependence of the charging potential on the electron energy, we found that the electron energy at which no charge‐up occurs is about 2.7 keV. This appears to be the energy at the which secondary electron emission yield becomes unity. This indicates that electron irradiation of FEP film with energies lower than 2.7 keV induces positive charging. From the charge decay characteristics after electron irradiation, the volume resistivity of the film was also obtained as a function of the electric fields in the bulk of the FEP film.     

Processing of nanolitre liquid plugs for microfluidic cell-based assays

Plugs, i.e. droplets formed in a microchannel, may revolutionize microfluidic cell-based assays. This study describes a microdevice that handles nanolitre-scale liquid plugs for the preparation of various culture setups and subsequent cellular assays. An important feature of this mode of liquid operation is that the recirculation flow generated inside the plug promotes the rapid mixing of different solutions after plugs are merged, and it keeps cell suspensions homogeneous. Thus, serial dilutions of reagents and cell suspensions with different cell densities and cell types were rapidly performed using nanolitres of solution. Cells seeded through the plug processing grew well in the microdevice, and subsequent plug processing was used to detect the glucose consumption of cells and cellular responses to anticancer agents. The plug-based microdevice may provide a useful platform for cell-based assay systems in various fields, including fundamental cell biology and drug screening applications.     

Four-Parameter Hybrid–Bishop–Hill Model Applied to OFE Copper for the Evaluation of Elastic/Yield Limit

This study employs a novel stress-based Hybrid–Bishop–Hill yield model approach to evaluate the yield surface of oxygen-free electronic copper samples. The local yield surface is determined from three parameters of crystal orientation and one parameter of geometrically necessary dislocation (GND). All four local state variables can be rapidly determined by analysis of measured electron backscatter diffraction patterns. Estimates for the polycrystalline yield surface are obtained by standard averaging procedures. The shape of the yield surface is most influenced by the texture of the material, while the volume of the envelope scales with the average GND density. However, correlations between crystal orientation and GND content modify the yield surface shape and size. While correlations between GND density and crystal orientation are not strong for most copper samples, there are sufficient dependencies to demonstrate the benefits of the detailed four-parameter model. The four-parameter approach has potential for improving estimates of elastic-yield limit in all polycrystalline materials.     

Antitermitic activity of extracts from Chamaecyparis obtusa branch heartwood

The antitermitic activity of extracts from the branch heartwood of Chamaecyparis obtusa (hinoki) against Japanese termites (Reticulitermes speratus) was compared with that of the trunk. Samples of branch and trunk heartwood were extracted with n-hexane, ethyl acetate, and methanol successively. n-Hexane extracts of branch and trunk heartwood were strongly antitermitic, and branch heartwood contained greater quantities of active n-hexane extracts than trunk heartwood. Germacra-1-(10), 5-dien-4β-ol, t-cadinol, α-cadinol, hinokiresinol, and hinokinin were separated from the branch extracts and the termiticidal and antifeedant activity of these compounds was tested by no-choice and dual-choice test methods. The sesquiterpenoids, germacra-1-(10), 5-dien-4β-ol, t-cadinol and α-cadinol were strongly termiticidal. The norlignan hinokiresinol and lignan hinokinin had weak termiticidal, and strong antifeedant and repellent activity. High concentrations of germacra-1-(10), 5-dien-4β-ol and hinokiresinol were present in branch heartwood. These compounds protect hinoki branches from termites and other harmful organisms. Hinoki branch heartwood, which is usually unused, is a potential source of active antitermitic compounds.     

Syntheses of Spinon Thermal Conductivity Materials in Sr–Cu–O System by Glass‐Ceramics Technique

We have synthesized spinon thermal conductivity materials in Sr–Cu–O system by glass‐ceramics technique. The materials are promising for active control of thermal energy in microelectronic devices because of high and anisotropic thermal conduction, its controllability, and electric insulation. Nevertheless, research on these materials has been limited to that concerning theoretical perspectives and investigation of physical properties using large single crystals. In this study, we adopt glass‐ceramics technique to synthesize these materials: We prepared melt‐quenched multicomponent oxides including SrO and CuO, and checked its glass‐forming ability and crystallization behaviors by heating. As a result, we have found that SrCuO₂ and Sr₁₄Cu₂₄O₄₁, known as the spinon thermal conductivity materials, are synthesized using SrO–CuO–?Li₂O–?Al₂O₃?–Ga₂O₃ system. This synthesis process for the system will provide practical application of the spinon thermal conductivity materials.