Cyclic stress response and fatigue behavior of Cu added ferritic steels

Steels in which Cu content was altered from 0 to 1.5 mass% were subjected to various heat treatments to change the state of Cu. Concerning these respective steels, fatigue ratio by a stress controlled fatigue test and fatigue resistance by a strain controlled fatigue test thereof were compared. Furthermore dislocation substructure and surface defect during and after cyclic straining were investigated to clarify the effect of Cu on fatigue properties. The fatigue ratios at 2.0 × 10⁶ loading cycles of the Cu added steels after aged at 450 and 750 degrees C are 0.7, remarkably high as compared with those of the Cu added steels after aged at 550 and 650 degrees C, the Cu free steels and any other conventional steels whose fatigue ratio are approximately between 0.5 and 0.6. The fatigue resistance of the as-rolled Cu added steel maintains steady cyclic hardening until fracture. To the contrary the Cu added steel after heat treatment at 550 degrees C shows cyclic hardening to the peak stress and then shows a cyclic softening until fracture. The surface roughness of the Cu added steels after cyclic straining are relatively shallow compared with those of the Cu free steel. The internal substructure of the Cu free steel shows typical cell structure but those of the Cu added steels exhibit vein structure.     

Viscosity of Gaseous Mixtures of HFC-125+HFC-32

This paper reports experimental results for the viscosity of gaseous mixtures of HFC-125 (pentafluoroethane)+HFC-32 (difluoromethane). The measurements were carried out with an oscillating-disk viscometer of the Maxwell type at temperatures from 298.15 to 423.15K. The viscosity was measured for three mixtures (mole fraction of HFC-125 is 0.7498, 0.4998, or 0.2475). The viscosity at normal pressure was analyzed with the extended law of corresponding states developed by Kestin et al. and the scaling parameters were obtained for unlike-pair interactions between HFC-125 and HFC-32. The modified Enskog theory developed by Vesovic and Wakeham was applied to predict the viscosity for the binary gaseous mixtures under pressure. For the calculation of the pseudo-radial distribution function in mixtures, a method based on the Carnahan–Starling equation for the radial distribution function of hard sphere mixtures is proposed.     

Properties of Starch Films and their Improvement

The tensile strengths and elongations of starch films prepared from various unmodified and modified starches were measured. These properties were improved by addition of urea and polyvinyl alcohol to the starch paste. The results obtained were as follows.

• 1 The heating temperature greatly affected the tensile strength and elongation of various unmodified starches. Potato starch gave the best film.
• 2 Introduction of hydroxyethyl groups into corn starch had unexpectedly little affect on the properties of the films.
• 3 A combination of hydroxyethylation and acid-modification slightly improved the properties of the films.
• 4 No film could be obtained after combinations of hydroxyethylation and hypochlorite-oxidation, pyrodextrinization or α-amylase-dextrinization. However, addition of urea to these modified starches resulted in good films.
• 5 On addition of urea the elongation of starch films increased and the pastes adhered uniformly to water repellent surfaces.
• 6 A film with the best properties was prepared from a mixture of 67% acid-modified hydroxyethyl starch, 13% urea and 20% polyvinyl alcohol.

     

Tunable Terahertz Device Using Refractive Index Control

We measured the thermal dependencies of the refractive index and the absorption coefficient of high-resistivity silicon. We found that the refractive index varied slightly with temperature, and the absorption coefficient was very low and remained approximately constant as the temperature was changed. As a result, the conditions for terahertz propagation in silicon could be controlled by changing the refractive index without any absorption loss. As one application of this effect, we developed a terahertz time delay generator that can generate a terahertz time delay by changing the temperature of the medium through which the terahertz beam passes, without the need for any mechanical delay. We demonstrated generation of a terahertz time delay of approximately 6.6 ps.     

Detection and Quantitation of Left-to-Right Shunts from Radionuclide Angiocardiography Using the Homomorphic Deconvolution Technique

The homomorphic filtering method is described for the detection and quantitation of left-to-right shunts from radionuclide angiocardiography. First, the method is investigated theoreticatly and numerically using a realistic model with systemic recirculation. It is demonstrated that even in a noisy situation the shunt flow fraction can be relatively well estimated, if only the characteristics of the fiters used are suitable. Second, the method is applied to real data, i.e., the pulmonary time-activity curves from radionucUde anglocardiography. The presence or absence of a left-to-right shunt is determined using the ratio AT/MTT. The pulmonary-to-systemic flow ratios calculated from the areas of the two decomposed curves are compared with those from oximetry at cardiac catheterization. Good agreement between the Qp/Qs ratios calculated by oximetry and radionucUide angiocardiography is obtained.     

Sulfated Hyaluronan Binds to Heparanase and Blocks Its Enzymatic and Cellular Actions in Carcinoma Cells

We examined whether sulfated hyaluronan exerts inhibitory effects on enzymatic and biological actions of heparanase, a sole endo-beta-glucuronidase implicated in cancer malignancy and inflammation. Degradation of heparan sulfate by human and mouse heparanase was inhibited by sulfated hyaluronan. In particular, high-sulfated hyaluronan modified with approximately 2.5 sulfate groups per disaccharide unit effectively inhibited the enzymatic activity at a lower concentration than heparin. Human and mouse heparanase bound to immobilized sulfated hyaluronan. Invasion of heparanase-positive colon-26 cells and 4T1 cells under 3D culture conditions was significantly suppressed in the presence of high-sulfated hyaluronan. Heparanase-induced release of CCL2 from colon-26 cells was suppressed in the presence of sulfated hyaluronan via blocking of cell surface binding and subsequent intracellular NF-κB-dependent signaling. The inhibitory effect of sulfated hyaluronan is likely due to competitive binding to the heparanase molecule, which antagonizes the heparanase-substrate interaction. Fragment molecular orbital calculation revealed a strong binding of sulfated hyaluronan tetrasaccharide to the heparanase molecule based on electrostatic interactions, particularly characterized by interactions of (−1)- and (−2)-positioned sulfated sugar residues with basic amino acid residues composing the heparin-binding domain-1 of heparanase. These results propose a relevance for sulfated hyaluronan in the blocking of heparanase-mediated enzymatic and cellular actions.     

Gamma-Ray Spectrometer based on a Transition Edge Sensor for Nuclear Materials Analysis

We designed and fabricated a hard X-ray and gamma-ray TES spectrometer for nuclear materials analysis. The superconducting tin absorber is coupled to an Ir/Au TES by using a gold post to improve the thermal contact between the absorber and the TES. The reported energy resolution is 156 eV FWHM at 59.5 keV and 166 eV FWHM at 122 keV gamma-rays. We performed measurement of a Pu sample and clearly separated the \(^{239}\) Pu (56.828 keV) and the \(^{241}\) Am (59.5 keV) peaks by this TES microcalorimeter which cannot be resolved by the HPGe detector.     

High-pressure studies on Tc and crystal structure of iron chalcogenide superconductors

The superconducting transition temperature, T_c, in iron-based solids can be enhanced by applied pressure: T_c increases from 8 to 37 K for the 11-type FeSe when the pressure is raised from 0 to 4 GPa. High-pressure studies can elucidate the mechanism of superconductivity in such novel materials. In this paper, we present a high-pressure study of Fe(Se_1−xTe_x) and Fe(Se_1−xS_x). In the case of Fe(Se_1−xTe_x), the maximum T_c under high pressure did not exceed the T_c of FeSe, which can be attributed to the structural transition to the monoclinic phase. For Fe(Se_1−xS_x) (0 < x < 0.3), T_c exhibited a significant increase with pressure; however, the maximum T_c under high pressure did not exceed the T_c of FeSe. This may be due to the disorder induced by substituting S for Se, which is similar to the pressure effect on T_c for the 1111-type superconductor Ca(Fe_1−xCo_x)AsF. The T_c of Fe(Se_1−xS_x) showed a complex behavior below 1 GPa, first decreasing and then increasing with increasing pressure. From high-pressure x-ray diffraction measurements, the T_c (P) curve was correlated with the local structural parameter.     

Fabrication of heterostructures of halogen-bridged quasi-one-dimensional mixed-valence transition metal complexes

Single-heterostructure crystals of a series of halogen-bridged quasi-one- dimensional mixed-valence transition metal complexes (HMMCs) were fabricated by selective coordination epitaxial growth (SCE growth). The overgrowth crystals of the HMMC were grown on the columnar crystals of the substrate HMMC in solution. The single-heterostructure crystals were epitaxially grown only when the two HMMCs had similar crystal structures. If their crystal structures were different, no heterostructure crystal was grown. This result suggests that the degree of mismatch between the crystal structures of the substrate and the overgrowth is the predominant factor which determines the SCE growth of the HMMCs.     

Out‐of‐Plane Strain Induced in a Moiré Superstructure of Monolayer MoS2 and MoSe2 on Au(111)

Making contact of transition metal dichalcogenides (TMDCs) with a metal surface is essential for fabricating and designing electronic devices and catalytic systems. It also generates strain in the TMDCs that plays significant role in both electronic and phonon structures. Therefore, detailed understanding of mechanism of the strain generation is important to fully comprehend the modulation effect for the electronic and phonon properties. Here, MoS₂ and MoSe₂ monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out‐of‐plane strain in both MoS₂ and MoSe₂ layers, whereas no strain generation is observed on polycrystalline Au or SiO₂/Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the S? Mo? S (Se? Mo? Se) structure and Au atoms via unique moiré superstructure formation for MoS₂ and MoSe₂ layers on Au(111). This observation indicates that the specific adsorption sites give rise to out‐of‐plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS₂ or MoSe₂ layer.