Double-supply-frequency pressure pulsation in annular linear induction pump: Part I: Measurement and numerical analysis

This paper describes an experimental and analytical study of double-supply-frequency pressure pulsation arising in an annular linear induction pump. In a large-scale induction pump, it is known that the supply frequency should be relatively low in order to satisfy a magnetohydrodynamic stability criterion. Under such a low supply frequency, however, double-supply-frequency pressure and flow rate pulsation generated in an induction pump may be of concern. The experimental data obtained in the present work shows that the amplitude of the pressure pulsation increases with decreasing supply frequency, number of poles and/or slip. The numerical result reveals that the pressure pulsation comes from a disturbance of the electromagnetic force near the stator ends.     

Organic LED full-color passive-matrix display

Abstract— A full-color 5.2-inch 1/4-VGA passive-matrix organic LED display has been developed, adopting selective deposition for the different emitting materials. The display features 320 (×3) × 240 pixels with an equivalent pixel size of 0.33 × 0.33 mm, white peak luminance of over 150 cd/m², and power consumption of 6 W.     

An Automatic Guidance System of a Self-Controlled Vehicle

An automatically guided vehicle, traveling without fixed guide ways, has been developed. In this paper, the construction of the vehicle, the control algorithm, and its general performance are described.     

Chemical dehydrofluorination and electrical conductivity of poly(vinylidene fluoride) films

The dehydrofluorination of poly(vinylidene fluoride) (PVDF) powder and films was studied using several kinds of base solution. Especially the reactivity of 1,8-diazabicyclo[5.4.0]-7-undecene (DBU) in ethanol, KOH in 2-propanol and aqueous NaOH solution with tetrabutylammonium bromide was investigated by the change in infrared (IR) and ultraviolet-visible (UV-VI) absorptions of PVDF films. The elimination reactions by DBU or KOH were considered to be accompanied by substitution reaction. The electrical conductivity of dehydrofluorinated PVDF films increased markedly by doping with iodine, and the activation energies of conduction were found to be between 0.4 and 0.5 eV. When a drawn PVDF film was dehydrofluorinated and doped with iodine, anisotropy in conductivity was observed.     

Origin of the Red Color of Satsuma Copper-Ruby Glass as Determined by EXAFS and Optical Absorption Spectroscopy

The origin of the ruby color of Satsuma glass, a famous copper-ruby glass produced in Japan in the mid-19th century, has been examined by electron microprobe analysis (EPMA), X-ray absorption fine structure (XAFS), and optical absorption spectroscopy analyses. Cu K XAFS analysis reveals that the major component of copper in the ruby glass consists of Cu(I) ions in the glass structure. This species is distinct from Cu₂O (cuprite), which we conclude is not responsible for the ruby color. Optical absorption spectra measured at 300 and 77 K clearly distinguishes the absorptions due to the colloidal particles of metallic copper and Cu₂O. It is concluded that the trace amount of copper in the ruby glass, which is below the detection limit of the EPMA and XAFS techniques, exists as metallic copper particles of nanometer size and is responsible for the ruby-red appearance of the Satsuma glass.     

An undulator with a composite magnetic field

A new type of undulator greatly improved in tunability as compared with a usual undulator, is proposed. The undulator has a composite magnetic field which is a linear superposition of two sinusoidally varying fields with different spatial periods. The wavelength can be changed by varying the field strength of the longer-period component while keeping that of the shorter-period component at the highest possible value. Numerical calculations of the spectral brightness were carried out. The proper ratios between the two spatial periods were found to be 3:1, 5:1 and 7:1.     

Approximate method of estimating seismic performance of high‐rise buildings with oil‐dampers

When subjected to long‐period ground motions, many existing high‐rise buildings constructed on plains with soft, deep sediment layers experience severe lateral deflection, caused by the resonance between the long‐period natural frequency of the building and the long‐period ground motions, even if they are far from the epicenter. This was the case for a number of buildings in Tokyo, Nagoya, and Osaka affected by the ground motions produced by the 2011 off the Pacific coast of Tohoku earthquake in Japan. Oil‐dampers are commonly used to improve the seismic performance of existing high‐rise buildings subjected to long‐period ground motion. This paper proposes a simple but accurate analytical method of predicting the seismic performance of high‐rise buildings retrofitted with oil‐dampers installed inside and/or outside of the frames. The method extends the authors' previous one‐dimensional theory to a more general method that is applicable to buildings with internal and external oil‐dampers installed in an arbitrary story. The accuracy of the proposed method is demonstrated through numerical calculations using a model of a high‐rise building with and without internal and external oil‐dampers. The proposed method is effective in the preliminary stages of improving the seismic performance of high‐rise buildings.     

Highly Stable Au Nanoparticles with Tunable Spacing and Their Potential Application in Surface Plasmon Resonance Biosensors

Colloidal Au‐amplified surface plasmon resonance (SPR), like traditional SPR, is typically used to detect binding events on a thin noble metal film. The two major concerns in developing colloidal Au‐amplified SPR lie in 1) the instability, manifested as a change in morphology following immersion in organic solvents and aqueous solutions, and 2) the uncontrollable interparticle distance, determining probe spacing and inducing steric hindrance between neighboring probe molecules. This may introduce uncertainties into such detecting techniques, degrade the sensitivity, and become the barricade hampering colloidal Au‐based transducers from applications in sensing. In this paper, colloidal Au‐amplified SPR transducers are produced by using ultrathin Au/Al₂O₃ nanocomposite films via a radio frequency magnetron co‐sputtering method. Deposited Au/Al₂O₃ nanocomposite films exhibit superior stability, and average interparticle distances between Au nanoparticles with similar average sizes can be tuned by changing surface coverage. These characteristics are ascribed to the spacer function and rim confinement of dielectric Al₂O₃ and highlight their advantages for application in optimal nanoparticle‐amplified SPR, especially when the probe size is smaller than the target molecule size. This importance is demonstrated here for the binding of protein (streptavidin) targets to the probe (biotin) surface. In this case, the dielectric matrix Al₂O₃ is a main contributor, behaving as a spacer, tuning the concentration of Au nanoparticles, and manipulating the average interparticle distance, and thus guaranteeing an appropriate number of biotin molecules and expected near‐field coupling to obtain optimal sensing performance.     

Relative reactivity of phenylboronic acid to phenylboronate ion toward L-lactate and mandelate at physiological pH

Kinetic studies were performed on the reactions of phenylboronic acid with L-lactic acid and mandelic acid in acidic aqueous and alkaline solutions in order to specify reactive species in these reactions. It was confirmed that the diprotonated ligand (H₂L: L-lactic acid or mandelic acid) is less reactive than the monoprotonated ligand (HL^?: L-lactate ion or mandelate ion), which made possible direct determination of the rate constants of phenylboronic acid (PhB(OH)₂) and its conjugate base, phenylboronate ion (PhB(OH)₃^?). It was found that PhB(OH)₂ is more reactive than PhB(OH)₃^?. On the basis of kinetic results, it was concluded that the most reactive species are PhB(OH)₂ and HL^? at physiological pH 7.4, so the reaction in the boronic acid-based sensor for L-lactate mainly would occur between these species.