Development of an Enzyme-Linked Immunosorbent Assay for Specific Detection of Mulberroside A in Mulberry (Morus alba L.) Using Anti-mulberroside A Polyclonal Antibody

An enzyme-linked immunosorbent assay (ELISA) was developed using polyclonal antibody (PAb) against mulberroside A (MuA), a major active component found in the root bark of mulberry (Morus alba L.). MuA was conjugated with the carrier protein bovine serum albumin for immunization to rabbits. The results showed that the antibodies were specific only for MuA and have very low specificity for its aglycone, oxyresveratrol. The ELISA assay was suitable for quantitating MuA in the range of 0.17–15.62 μg/mL with a relative standard deviation (RSD) of less than 5 % for both intra- and inter-assay precision levels. The recovery rates of MuA in the samples were in the range of 97.6–101.4 % with a RSD of less than 5 %. The developed ELISA exhibited a good correlation value (R ²?=?0.994) with the standard high-performance liquid chromatography method in the crude extracts of plant samples. These results suggest that the developed ELISA method using PAb against MuA can be applied to determine MuA content with high specificity, rapidity, and simplicity in mulberry samples. The developed ELISA method described could prove to be useful as an analytical tool for quality control of mulberry and their products.     

Determination of residual avoparcin in chicken muscle by HPLC with ultraviolet and amperometric detection

An analytical method was developed for determination of residual avoparcin in chicken muscle by measuring alpha- and beta-avoparcin, major components of the pharmaceutical preparation avoparcin, using HPLC with UV and amperometric detectors. The analytical HPLC was run on a Cosmosil 5C18-AR column (4.6 mm x 25 cm) with a gradient formed from A: 2.5% acetic acid, 0.01 mol/L sodium heptane sulfonic acid-acetonitrile (88.5:11.5) (pH 4.0) and B: 2.5% acetic acid-acetonitrile (10:90), using UV and amperometric detection (AMD) with glassy-carbon electrode (+900 mV). Avoparcin was extracted from chicken muscle by homogenization with methanol-0.2 mol/L sulfuric acid (6:4) followed by centrifugation after pH adjustment to 4 with 1 mol/L sodium hydroxide. The supernatant was evaporated to dryness, and the residue was dissolved in water. The aqueous layer was adjusted to pH 4 by adding 1 mol/L sodium hydroxide. Then it was purified on a Sep-Pak tC18 plus ENV cartridge. The cartridge was washed with water, and retained substances were eluted with 50% methanol. The eluate was evaporated to dryness under reduced pressure. The residue was dissolved in water and determined by HPLC. Recoveries of avoparcin spiked in chicken muscle were 73.1-88.1% at levels of 2-10 micrograms/g. The detection limits were 0.5 microgram/g (UV) and 0.2 microgram/g (AMD).     

Sar1 Affects the Localization of Perilipin 2 to Lipid Droplets

Lipid droplets (LDs) are intracellular organelles that are ubiquitous in many types of cells. The LD core consists of triacylglycerols (TGs) surrounded by a phospholipid monolayer and surface proteins such as perilipin 2 (PLIN2). Although TGs accumulate in the phospholipid bilayer of the endoplasmic reticulum (ER) and subsequently nascent LDs buds from ER, the mechanism by which LD proteins are transported to LD particles is not fully understood. Sar1 is a GTPase known as a regulator of coat protein complex Ⅱ (COPⅡ) vesicle budding, and its role in LD formation was investigated in this study. HuH7 human hepatoma cells were infected with adenoviral particles containing genes coding GFP fused with wild-type Sar1 (Sar1 WT) or a GTPase mutant form (Sar1 H79G). When HuH7 cells were treated with oleic acid, Sar1 WT formed a ring-like structure around the LDs. The transient expression of Sar1 did not significantly alter the levels of TG and PLIN2 in the cells. However, the localization of PLIN2 to the LDs decreased in the cells expressing Sar1 H79G. Furthermore, the effects of Sar1 on PLIN2 localization to the LDs were verified by the suppression of endogenous Sar1 using the short hairpin RNA technique. In conclusion, it was found that Sar1 has some roles in the intracellular distribution of PLIN2 to LDs in liver cells.     

Numerical simulation of deflecting flow in a symmetric enlarged channel

Numerical results of three-dimensional separated flow and heat transfer in a rectangular channel with a suddenexpansion are presented in this paper.Numerical simulations of Navier-Stokes and energy equations are carriedout using the finite difference method.The results of three-dimensional calculations are compared with thetwo-dimensional ones,and effects of the aspect ratio of channel upon the flow are shown.The transition fromsymmetric to asymmetric flow appears at lower Reynolds number as increasing the aspect ratio.The details oflocal heat transfer characteristics in two different separated flow regions on two downstream walls are clarified.Two-dimensionality of the flow and heat transfer almost disappears for the aspect ratio considered.     

Technical investigation on small water leakage incident occurrence in mercury target of J-PARC

Japan Proton Accelerator Research Complex experienced failures of two mercury targets, which were Target #5 and #7, in 2015 when the facility was operating with a proton beam power of 500 kW. The failures involved coolant water leak from the water shroud. In this paper, we investigate the root cause of the Target #5 failure. The results of the visual inspections, mockup tests, and analytical evaluations suggested that the water leak was caused by the possible combination of two incidents. One was the diffusion bonding failure due to the large thermal stress induced by welding of the bolt head during the fabrication process, and the other was the thermal fatigue failure of the seal weld due to the repetitive beam shutdown during beam operation. Though the investigation into the root cause of the Target #7 failure is still going on, these target failures point to the importance of eliminating initial defects and the need to secure the rigidity and stability of welded structures. The next mercury target, Target #8, was fabricated with an improved design and fabrication process to reduce the possibility of similar failures. The beam operation of this mercury target is planned to be started in October 2017.     

Visualized measurement of extremely high-speed droplets in Venturi scrubber

Venturi scrubbers for filtered venting have been installed in nuclear power plants worldwide. Venturi scrubbers can eliminate fission products from a polluted gas by interaction through gas–liquid interfaces. Therefore, droplet diameter is important from the viewpoint of decontamination. When Venturi scrubbers are used in severe accidents, the gas flow velocity might be extremely high. In these studies, the authors did not measure droplet diameter under extremely high gas velocity conditions. In the scenarios, experimental data pertaining to droplet diameter, under the extremely high gas flow velocity, are required. Therefore, this objective is to evaluate the diameter of extremely high-speed droplets. A visualization experiment was conducted using a Venturi scrubber. The droplet diameter distribution and the Sauter mean diameter (SMD) were determined. By comparing between the experimental value of SMDs and the one evaluated using Nukiyama–Tanasawa equation, it was confirmed that the Nukiyama–Tanasawa equation can be used to evaluate SMD with good accuracy in the gas velocity range of 82–250 m/s, except the highest gas velocity conditions. Furthermore, the droplet generation mechanism in the Venturi scrubber was considered to clarify the main reason why the Nukiyama–Tanasawa equation can be used to evaluate SMD droplet diameter.     

Quantifying MnS Inclusion Evolution Behaviors During 1473 K Heating in EH36 Shipbuilding Steel with Zr Addition

Metallurgical and Materials Transactions B - The evolution behaviors of MnS inclusions during 1473 K heating have been systematically investigated for EH36 shipbuilding steel with Zr addition. It...     

Asymmetric Multidimensional Scaling of Brand Switching Among Margarine Brands

Behaviormetrika - Brand switching data among 12 margarine brands were analyzed by the asymmetric multidimensional scaling based on the singular value decomposition. A two-dimensional result was...     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.