Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

CO毒化AB5型合金分形特征研究

研究了三种贮氢合金 L a Ni5、L a Ni4 .7Al0 .3、Ml Ni4 .5Al0 .5被 10 0× 10 - 6 CO毒化后的分形特征 ,求出这三种合金在含 10 0× 10 - 6 CO的氢中循环 ,分维分别为 0 .2 5 4 7、0 .170 9、0 .0 72 5。可以较好的解释合金被毒化的宏观现象。     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。     

反应温度对聚苯胺薄膜生长的影响

在不同反应温度条件下采用原位聚合法在石英基片上制备了聚苯胺薄膜．对薄膜样品进行了紫外光谱、SEM、电性能表征。实验结果表明，过高的合成温度会加速聚合反应过程，抑制膜厚的增长，引起薄膜的热降解，进而对样品的导电性产生不良影响。根据生长速率与合成温度的依赖关系，估算了聚合反应的活化能Ea=34.4kJ/mol。     

有限元仿真分析中的结构周期差异探讨

针对有限元仿真分析中结构自振周期减小的问题，讨论了几种主要的影响因素，并借用商品化设计软件TBSA，ETABS 和有限元分析软件ANSYS，通过对一个简单结构的多次计算，比较了这些因素的影响大小。     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

基于SolidWorks的螺杆压缩机机体三维建模设计

应用SolidWorks软件,建立了螺杆压缩机机体三维实体模型.对螺杆压缩机机体的内、外螺旋面的建模进行了分析和研究,提出了建立分段螺旋面模型的基本思路和方法.     

Optical sequence generation based on collision avoidance usingchaotic mode transitions

An adaptive optical sequence generation scheme has been described in a nonlinear optical ring which exhibits chaotic dynamics. The adaptation is based on avoidance of collisions between the ring output and signals from another source. It is shown that collision-avoiding sequences can be autonomously selected via chaotic mode transitions induced by the feedback of collision signals. Experimental results demonstrate that the method can be successful for various collision signal patterns with different periods and pulsewidths. The mechanism of inducing chaos with collision signals is examined both experimentally and with numerical simulations and the results verify the effectiveness of the proposed adaptation method. A possible application of the proposed signal generation scheme in intelligent optical communication networks is mentioned     

基于金刚石薄膜的微间隙室制备

采用金刚石薄膜作为阴-阳极间绝缘介质层是一种新型的微间隙室(MGC)结构。该文详细介绍和讨论了采用常规的微细加工工艺制备基于金刚石薄膜介质层的MGC的制备技术,其典型结构为阳极微条宽20μm,微条间隔180μm,器件探测区面积为38 mm×34 mm。采用热丝CVD法制备的金刚石薄膜作为阴-阳极间绝缘介质层,厚7~8μm,具有(100)晶面结构。金刚石的刻蚀采用反应离子刻蚀,Cr作掩膜,O2和SF6为刻蚀气体,刻蚀速率为79 nm/min,与Cr的刻蚀比约为20:1。实验结果表明,采用的微加工结合自套准工艺可很好地解决金刚石薄膜的制备、图形化及金属阳极电极与金刚石薄膜的相互套准等金刚石薄膜的可加工性及兼容性问题,并制备出采用金刚石薄膜作为电极间绝缘介质层的新型MGC结构。