Optoelectronic integration of a GaAs/AlGaAs bistable field effecttransistor (BISFET) and LED

The bistable field effect transistor (BISFET) is a novel inversion-channel switching device exhibiting abrupt current transitions and hysteresis in its output characteristics. The semiconductor structure of the BISFET is compatible with a range of electronic and optoelectronic devices. In this work, integration of a BISFET with an LED is reported. Both devices have been implemented on a single semiconductor substrate using a single fabrication sequence. The BISFET is used to current drive the LED. Abrupt transitions and hysteresis are seen in the optical output from the circuit in the range of gate voltage from 1.75 V to 1.9 V     

Modeling the I-V characteristics of fully depleted submicrometerSOI MOSFET's

In this paper, an analytic current-voltage model for submicrometer fully-depleted (FD) silicon-on-insulator (SOI) MOSFET's is presented. This model takes into account the source/drain series resistances which can be especially high in thin film SOI devices. The effect of drain induced conductivity enhancement is also included, which is important for submicrometer channels. The model is verified by comparison to measured SOI I-V characteristics. Good agreement is obtained for SOI film thicknesses ranging from 40 to 220 nm and effective channel lengths down to 0.25 μm     

Analysis of clinical trial data: The problem of outcome overlap.

The immediate goal of any clinical trial is to determine to which of a specified set of treatments future patients are to be assigned, particularly when analyzing data from clinical trials. When the outcome distributions of Experimental (E) and Control (C) treatments overlap, differences between treatment group means are not conclusive and may not be very informative, so a display of the overlapped frequency distributions and a summary measure of the probability of a random patient in E doing better than a random patient in C are needed. When outcome distributions overlap, the question of statistical model becomes crucial even when there are very significant differences between group means and very large effect sizes. Determining what patient variables interact with treatments is the route to optimal assignment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Resonant converter topologies with three and four energy storageelements

Generalized half-bridge and full-bridge resonant converter topologies with two, three and four energy storage elements are presented. All possible circuit topologies for such converters under voltage/current driven and voltage/current sinks are discussed. Many of these topologies have not been investigated in open literature. Based on their circuit element connections and source and load excitation types, these topologies are classified into resonant and nonresonant topologies and on their physical realizability. Comparison based on exact steady state analysis are given for typical second- and third-order series resonant converters whereas the fourth-order topology is based on the approximate analysis     

A method for reducing harmonics in output voltages of adouble-connected inverter

A new method for reducing the harmonics involved in the output voltages of a double-connected inverter is proposed. By adding four auxiliary switching devices and an interphase transformer with a secondary winding to the conventional 12-step inverter, output voltages of the proposed circuit can produce almost the same waveforms as a conventional 36-step inverter. In this paper, circuit performances and output voltage waveforms are discussed, and optimum parameters are derived. The effects on harmonic reductions are then clarified by theoretical and experimental results, and the ratings of system components are investigated     

ATM switching and CPE adaptation in the North Carolina InformationHighway

This article describes the approach which has been used to implement a sector of the information highway throughout the state of North Carolina, with specific attention focused on the functionality of the equipment that comprises the North Carolina Information Highway (NCIH). This implementation of this information highway is based on ATM technology, used in both the switching systems of the network and the customer premises equipment (CPE). The large ATM switching systems provide the extensive number of connections that are predicted for the information highway. Multiple services can also be supported on the ATM switches. The information streams for these different services can all be converted into ATM format using the appropriate ATM adaptation layer for transport through the ATM network. By being able to support multiple services, and transport them across common ATM facilities, the ATM switches offer the NCIH great flexibility in the applications that can be provided to the customers. Use of the ATM technology allows the NCIH to provide the backbone for various services. To provide the distance learning service application and other applications on the NCIH, ATM capabilities are also being provided in CPE on a service multiplexer     

Spread-spectrum communication techniques

Spread-spectrum modulation can be used in a radio system to reduce the likelihood of intercept, as well as providing some protection against jamming and interference. These antijam, anti-interference and low-probability-of-intercept properties are highly desirable in secured communication systems. In addition, spread-spectrum techniques have been proposed to combat spectral congestion by improving the efficiency of spectrum utilisation. Spread-spectrum techniques are also widely used in ranging systems and in local-area networks (LANs) or other multiple-access systems. In the present article, the three main spread-spectrum techniques are outlined and then applications of frequency-hopping systems and some of the techniques used are described     

Measurement techniques for monolithic microwave integrated circuits

Introduces the basic technologies that are associated with measurements of monolithic microwave integrated circuits. The use of test fixtures and wafer probe stations at ambient room temperature is reviewed and their role at thermal and cryogenic temperatures is discussed. With the increasing need for performing non-invasive measurements, advances in experimental field probing techniques are explored     

Uniplanar techniques for monolithic microwave integrated circuits

`Uniplanar' techniques have recently been introduced for the design of monolithic microwave integrated circuits (MMICs). The aim of these techniques is to achieve a higher level of integration of circuitry and to overcome the need for through-substrate via holes and the related back-face processing steps. This is achieved by using coplanar waveguide (CPW), slotline, and miniature `thin-film microstrip' transmission-line media as opposed to conventional microstrip. The design and performance of a number of uniplanar MMIC couplers, amplifiers, and other test circuits fabricated using the GEC-Marconi (Caswell) foundry are described     

Calculation and design of inlet devices and evaluation of their effect on turbocompressor operation

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 8, pp. 14–16, August, 1993.