Shear-rate dependence of first normal stress difference of poly(isoprene-b-styrene) in solution near the order-disorder transition temperature

Viscoelastic properties of poly(isoprene-b-styrene) in dioctylphthalate under steady shear flow were measured near the order—disorder transition temperature. In ordered states, first normal stress difference N₁ is proportional to shear rate at low region, but becomes proportional to at the high region, similar to the N₁ behaviour of polymer blends undergoing shear-induced homogenization. Because the existence of microdomains was confirmed at the high region by the flow birefringence method, it is concluded that the above N₁ behaviour is not caused by shear-induced homogenization, but is probably caused by the shear-induced alignment of the microdomain structure.     

Phase evolution and <110>-orientation mechanism in RTGG-processed BaTiO3 ceramics with electrical properties

The <110>-oriented BaTiO₃ ceramics were fabricated using BaCO₃ matrix and H_1.08Ti_1.73O₄.nH₂O (HTO) template particles, and the mechanism of BaTiO₃ phase formation was investigated. The dielectric, ferroelectric, and piezoelectric properties were also investigated. The transformation of the HTO phase into the TiO₂ bronze or TiO₂ (B) phase was observed at 600°C, where the BaTiO₃ nucleation was accompanied by the formation of a Ba₂TiO₄ phase. The TiO₂ phase reacted with the Ba₂TiO₄ phase at 800°C to give a BaTiO₃ phase, whereas its reaction with the BaTiO₃ resulted in the formation of BaTi₂O₅ phase that got decomposed into BaTiO₃ and Ba₆Ti₁₇O₄₀ phase at sintering temperature ≥1300°C. Sintering with samples’ embedding in BaTiO₃ powders prevented the formation of the Ba₆Ti₁₇O₄₀ secondary phase. The crystallographic orientation along the <110> direction (F₁₁₀) was developed by the epitaxial grain growth mechanism. In addition to the contribution of the grain-size increment for enhancing the F₁₁₀, the preservation of the platelike structure was also found to have a significant impact. The ceramics prepared by the embedded sintering (grain size ≈12.4 µm and F₁₁₀ = 83%) exhibited the room-temperature dielectric constant of 1708 and piezoelectric strain constant of 445 pm/V, which are higher than those of the BaTiO₃ ceramics with randomly oriented grains.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Dynamic hybridization of MILES and RANS for predicting airfoil stall

Hybridization comprised of an algebraic turbulence model based on the Reynolds average Navier-Stokes (RANS) equations with a monotonically integrated large eddy simulation (MILES) is proposed to simulate transient fluid motion during separation and vortex shedding at high Reynolds numbers. The proposed hybridization utilizes the Baldwin-Lomax model with the Degani-Schiff modification as the RANS model in the near-wall region and a MILES far from the wall. Although the hybridization is assumed to be a MILES with wall modeling, the transition line between the RANS and the MILES modes is determined by the turbulent intensity that is dominated by the large eddies in the grid-scale. This hybrid model is applied to the flows past three different types of airfoils (NACA63₃-018, NACA63₁-012 and NACA64A-006) near stall, at a chord Reynolds number of Re = 5.8 × 10⁶. These airfoils are classified as trailing-edge-stall, leading-edge-stall and thin-airfoil-stall airfoils, respectively. The computed results are compared with wind tunnel experiments. The hybrid model successfully demonstrates accurate stall angle and surface pressure distribution predictions near the stall for each type of airfoil. The airfoil simulation results confirmed that the hybrid model provides a better prediction than the RANS model for unsteady turbulent flows with separation and vortex shedding simulations.     

Efficient Leave-<Emphasis Type="Italic">m</Emphasis>-out Cross-Validation of Support Vector Regression by Generalizing Decremental Algorithm

We propose a computationally efficient method for cross-validation of the Support Vector Regression (SVR) by generalizing the decremental algorithm of SVR. Incremental and decremental algorithm of Support Vector Machines (SVM) ^{2, 8, 9)} efficiently update the trained SVM model when a single data point is added to or removed from the training set. The computational cost of leave-one-out cross-validation can be reduced using the decremental algorithm. However, when we perform leave-m-out cross-validation (m > 1), we have to repeatedly apply the decremental algorithm for each data point. In this paper, we extend the decremental algorithm of SVR^{8, 9)} in such a way that several data points can be removed more efficiently. Experimental results indicate that the proposed approach can reduce the computational cost. In particular, we observed that the number of breakpoints, which is the main computational cost of the involved path-following, were reduced from \({\mathcal O}(m)\) to \({\mathcal O}(\sqrt{m})\).     

An application of the 2-nitrobenzenesulfenyl method to proteomic profiling of human colorectal carcinoma: A novel approach for biomarker discovery

In the development of novel biomarkers, the proteomic approach is advantageous because using it the cancer-associated proteins can be directly identified. We previously developed a 2-nitrobenzenesulfenyl (NBS) method to improve quantitative proteome analysis. Here, we applied this method to proteomic profiling of colorectal carcinoma (CRC) to identify novel proteins with altered expression in CRC. Each pair of tumor and normal tissue specimens from 12 CRC patients was analyzed, and approximately 5000 NBS-labeled paired peaks were quantified. Peaks with altered signal intensities (>1.5-fold) and occurring frequently in the samples (>70%) were selected, and 128 proteins were identified by MS/MS analyses as differentially expressed proteins in CRC tissues. Many proteins were newly revealed to be CRC related; 30 were reported in earlier studies of CRC. Six proteins that were up-regulated in CRC (ZYX, RAN, RCN1, AHCY, LGALS1, and VIM) were further characterized and validated by Western blot and immunohistochemistry. All six were found to be CRC-localized, either in cancer cells or in stroma cells near the cancer cells. These results indicate that the proteins identified in this study are novel candidates for CRC markers, and that the NBS method is useful in proteome mining to discover novel biomarkers.     

Technique for anisotropic extension of organic crystals: application to temperature dependence of electrical resistance

We have developed a technique for the anisotropic extension of fragile molecular crystals. The pressure medium and the instrument, which extends the pressure medium, are both made from epoxy resin. Since the thermal contraction of our instrument is identical to that of the pressure medium, the strain applied to the pressure medium has no temperature dependence down to 2 K. Therefore, the degree of extension applied to the single crystal at low temperatures is uniquely determined from the degree of extension in the pressure medium and thermal contractions of the epoxy resin and the single crystal at ambient pressure. Using this novel instrument, we have measured the temperature dependence of the electrical resistance of metallic, superconducting, and insulating materials. The experimental results are discussed from the viewpoint of the extension (compression) of the lattice constants along the parallel (perpendicular) direction.     

Accumulation of triosephosphate isomerase, with sequence homology to Beta amyloid peptides, in vessel walls of the newborn piglet hippocampus

We investigated whether beta-amyloid (Abeta)-like immunoreactivity was seen in the brains of newborn piglets. The immunoreactivity for Abeta(1-42) and Abeta(1-40) proteins, but not Abeta precursor protein, was present in CD68-positive perivascular cells of the hippocampus and in parts of the meninges. It was colocalized with immunoreactivity for receptor for advanced glycation end product and tumor necrosis factor-alpha. The protein with a molecular mass of 27 kDa, which was recognized by the Abeta antibodies, was identified as triosephosphate isomerase (TPI) with sequence homology to Abeta peptides by N-terminal amino acid sequencing, mass fingerprint analysis using matrix-associated laser desorption/ionization mass spectrometry, and Western blotting. Western blotting assay also revealed that detectable expression of Abeta proteins were not seen in the piglet brains. These findings indicate that TPI with sequence homology to Abeta peptides accumulates in perivascular cells of the microglia/macrophage lineage located around arterial vessels of the newborn piglet hippocampus.