Corrugated waveguide monopulse feed

The excitation coefficients of modes in a circular corrugated waveguide that arise when dominant modes are incident from a cluster of four square waveguides are calculated. Mono-pulse-like radiation patterns arise when modes in the input guides are appropriately phased. Factors influencing the crosspolar performance of the feed are discussed, and the dependence of the excitation coefficients on waveguide and junction parameters is predicted.     

Laminar shear mixing in reaction injection molding

Turbulent flow in the impingement mixing head of a reactions injection molding machine produces a laminated mixture, whose striations are mostly so thick that any subsequent copolymerization would be hindered by diffusion. However, further reduction in striation thickness occurs during laminar flow through the runner. This is calculated here and is a function of the radial position in the runner and of its length/diameter ratio. So, for example, when L/D = 10, it is predicted that at least 79 percent of, the reagent striations would be thin enough to permit reaction under kinetically controlled conditions.     

Overview of LIMEX'87 ice observations

Ice observations, results, and conclusions are summarized for the March 1987 Labrador Ice Margin Experiment (LIMEX'87), an international oceanographic study conducted in the pack ice of the Grand Banks area off the coast of Newfoundland. Included are the ice extent, flow size and thickness, ice kinematics and rheology, ice microwave properties, oceanic properties under the ice, and penetration of swell into the ice     

MIM capacitor fabrication and assessment for GaAs MMICs

Metal-insulator-metal, MIM, capacitors have been fabricated using plasma deposited silicon nitride, SiN_x, films deposited under varying deposition conditions. The electrical properties of the MIM capacitors and the corresponding physical properties of the SiN_x films have been determined. The breakdown field strength of the films, which varied between 0.4–3.0 MVcm⁻¹, has been related to the amount of hydrogen incorporated in the SiN_x layers during deposition. Frenkel-Poole conduction through the silicon nitride has been observed at room temperature and this conduction mechanism is shown to be predominant and independent of the breakdown field strength, for the films investigated.     

The effect of charge relaxation on the electromagnetic radiation of an oscillating charged viscous drop

A dispersion equation for the capillary oscillations of a charged drop of incompressible liquid possessing a finite electric conductivity is derived with an allowance for the energy lost as a result of the electromagnetic wave emission. The magnitude of the electromagnetic radiation losses of the oscillating drop linearly increases with the electric conductivity and the surface mobility of charge carriers.     

Inductive switching of 4H-SiC gate turn-off thyristors

The high-temperature operation of a silicon carbide gate turn-off thyristor is evaluated for use in inductively loaded switching circuits. Compared to purely resistive load elements, inductive loads subject the switching device to higher internal power dissipation. The ability of silicon carbide components to operate at elevated temperatures and high power dissipations are important factors for their use in future power conversion/control systems. In this work, a maximum current density of 540 A/cm² at 600 V was switched at a frequency of 2 kHz and at several case temperatures up to 150°C. The turn-off and turn-on characteristics of the thyristor are discussed     

Pressure effects on flow and fracture of Be-Al alloys

The flow and fracture behavior of Be-Al alloys were determined in tension with different levels of superimposed pressure. The Be-Al alloys were prepared by Brush Wellman, Inc. (Cleveland, OH) from prealloyed powders processed to either a hot isostatically pressed (“hipped”) or cold isostatically pressed and extruded condition. Significant effects of pressure on both the flow and ductility have been observed at room temperature, with implications on the formability of these materials. The effects of changes in processing conditions and stress state on the flow and fracture behavior are summarized in addition to both optical and scanning electron microscopy (SEM) examination of the fracture surfaces. Separate other studies on the alloy constituents (e.g., Al and Be) are also reported. The results are also compared to previous works on monolithic materials and composites tested with high pressure.     

The ponding problem on elastic membranes: an analog equation solution

 In this paper, the nonlinear response of elastic membranes with arbitrary shape under partial and full ponding loads has been analyzed. Large deflections are considered, which result from nonlinear kinematic relations. The problem is formulated in terms of the displacements components and the three coupled nonlinear governing equations are solved using the analog equation method (AEM). The membrane may be prestressed either by prescribed boundary displacements or tractions. Using the concept of the analog equation the three coupled nonlinear equations are replaced by three uncoupled Poisson's equations with fictitious sources under the same boundary conditions. Subsequently, the fictitious sources are established using a procedure based on the BEM and the displacement components as well as the stress resultants at any point of the membrane are evaluated from their integral representations. In addition to the geometrical nonlinearity, the ponding problem is itself nonlinear, because the ponding load depends on the deflection surface that it produces. Iterative schemes are developed which converge to the equilibrium state of the membrane under the ponding loads. Several membranes are analyzed which illustrate the method and demonstrate its efficiency and accuracy. The method has all the advantages of the pure BEM, since the discretization and integration is limited only to the boundary. Received 28 July 2001     

HARDBALL: Local Government’s Foray Into Sports Franchise Ownership

Smaller cities seeking new economic development vehicles have embraced the growth of minor league sports. In an attempt to eliminate the threat of competition and maintain a sense of stability, four local governments purchased their respective minor league baseball franchise. This action may serve as a model for local governments that have invested heavily in professional sports as an economic development strategy. This study investigates the benefits of ownership in terms of stability for development, economic gain, and increased civic spirit. The study finds that publicly owned teams can be successfully used to anchor comprehensive plans for economic development, and that public ownership provides a way to pay the costs of the sports facilities and the debt service. There is little evidence to show that publicly owned teams increase civic spirit. However, this model presents some challenges that may prevent its widespread utilization.